• 한국도로학회논문집
• /
• 제19권4호
• /
• pp.45-52
• /
• 2017

PURPOSES : This study was initiated to estimate the utilities of usage attributes of BRT and Bimodal Trams using a conjoint analysis method in order to identify the important features pertaining to the use of BRT and Bimodal Trams. METHODS : For this purpose, important attributes and those level in the use of BRT and Bimodal Trams in the city of Sejong were identified. Next, a profile questionnaire pertaining to BRT and Bimodal Trams was designed for the conjoint analysis, and a survey was conducted in the city of Sejong. Using SPSS software, conjoint analysis was performed to identify the important attributes vis-$\acute{a}$-vis the use of BRT and Bimodal Trams in the city of Sejong. Finally, the utilities for individual attributes were calculated based on the models estimated by the conjoint analysis. RESULTS : The results of the conjoint analysis were used to identify the important attributes. With regard to the usage of BRT, users indicated that fare was the most important attribute with the highest utility. In the case of Bimodal Trams, the users indicated that the number of seats and internal environment were the most important attributes with the highest utilities. CONCLUSIONS : Based on the results of the conjoint analysis, the important attributes pertaining to the use of BRT and Bimodal Trams in the city of Sejong were identified. Our study indicates that BRT in the city of Sejong needs to be upgraded to improve the utilities of the important attributes. Currently, Bimodal Trams has not been introduced completely in the city of Sejong. However, in the future, when the introduction of Bimodal Trams is completed, the important attributes should be emphasized in order to improve the quality of its service.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.477-477
• /
• 2009

Bimodal Tram developed by KRRI is driven by a series Hybrid propulsion system which has both the CNG engine, generator and LPB(Lithium Polymer Battery) pack. It has three driving modes; Hybrid mode, Engine mode and Battery mode. Even in case of Battery mode, LPB pack to get enough power to drive the vehicle only by itself onsists of 168 LPB cells(80Ah per lcell), 650V. It is important thing to manage LPB pack in a right way, which will extend the lifetime of LPB cells and operate in the hybrid mode effectively. This paper has shown the development of battery management system(12 BMS, 1 BMS per 14cells) to manage LPB pack which is connected with CAN(Controller Area Network) each other and measure the voltage, current, temperature and also control the cooling fan inside of LPB pack. Using the measured data, BMS can show the SOC(State of Charge), SOH(State of Health) and other status of LPB pack including of the cell balancing.

• Advanced Composite Materials
• /
• 제18권1호
• /
• pp.1-20
• /
• 2009

This paper describes the results of experiments and numerical simulation studies on the impact and indentation damage created by low-velocity impact subjected onto honeycomb sandwich panels for application to the BIMODAL tram. The test panels were subjected to low-velocity impact loading using an instrumented testing machine at six energy levels. Contact force histories as a function of time were evaluated and compared. The extent of the damage and depth of the permanent indentation was measured quantitatively using a 3-dimensional scanner. An explicit finite element analysis based on LS-DYNA3D was focused on the introduction of a material damage model and numerical simulation of low-velocity impact responses on honeycomb sandwich panels. Extensive material testing was conducted to determine the input parameters for the metallic and composite face-sheet materials and the effective equivalent damage model for the orthotropic honeycomb core material. Good agreement was obtained between numerical and experimental results; in particular, the numerical simulation was able to predict impact damage area and the depth of indentation of honeycomb sandwich composite panels created by the impact loading.

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.231-235
• /
• 2015

Bimodal Tram developed by KRRI is driven by a series Hybrid propulsion system which has both the CNG engine, generator and LPB(Lithium Polymer Battery) pack. It has three driving modes; Hybrid mode, Engine mode and Battery mode. Even in case of Battery mode, LPB pack to get enough power to drive the vehicle only by itself onsists of 168 LPB cells(80Ah per lcell), 650V. It is important thing to manage LPB pack in a right way, which will extend the lifetime of LPB cells and operate in the hybrid mode effectively. This paper has shown the development of battery management system(12 BMS, 1 BMS per 14cells) to manage LPB pack which is connected with CAN(Controller Area Network) each other and measure the voltage, current, temperature and also control the cooling fan inside of LPB pack. Using the measured data, BMS can show the SOC(State of Charge), SOH(State of Health) and other status of LPB pack including of the cell balancing.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.278-283
• /
• 2009

The bimodal tram with a pivoting joint has difficulty in making a sharp turn because of their long body and wheel base. Therefore, applying AWS(all wheel steering) to the bimodal tram is effective to reduce the turning radius. In the present study, HILS(hardware in the loop simulation) system for the AWS ECU test was developed, which consists of the components used in real vehicles. The data obtained from the HILS system also satisfied the dynamics simulation without any error on the operation control.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.821-822
• /
• 2007

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.289-289
• /
• 2009

The series hybrid propulsion system in bimodal tram consists of CNG engine, generator, inverter, motor and battery as main components. Among them, battery is very important thing to make a hybrid bimodal tram more efficient in driving. Battery pack is composed of 168 LPB(lithium polymer battery) cells, 650Vdc-300A. LPB should be treated with a good consideration in both temperature and overvoltage. This paper had analyzed and investigated the thermal flow and distribution of LPB module(l4 LPB cells) and Pack in simulated environments by commercial thermal analysis tool.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.2074-2079
• /
• 2008

This paper presents a software toolbox with $Matlab^{(R)}$ developed for the various performance analysis of an automatic guidance system of the Bimodal Tram. The Bimodal Tram is a new kind of transportation vehicle which could be an all-wheel steered multiple-articulated vehicle. This vehicle has to be equipped with an automatic guidance, traction/braking, and docking system, In the stage of developing such a system, its validities and performances should be verified under various operation conditions. For the purpose of doing these things through simulation, this toolbox has been developed and demonstrated well by applying it to the KRRI model.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1061-1067
• /
• 2010

In this paper, we propose a simulator for testing of the Navigation Control System(NCS) in Bimodal-tram. NCS uses values of all sorts of sensors installed in vehicle to decide current position, and to control speed and steering of vehicle to go to a next position. Major functions of simulator are input processing of the driver and generation of virtual sensor data and driving profile(navigation path, magnetic information), and the NCS function. Virtual sensor data is generated according to output data from the NCS, driving profile and input processing of the driver, and monitoring systems is operated separatedly to confirm of NCS operation. This paper discusses about the implementation of the simulator, and analyzes and evaluates the simulation results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2107-2112
• /
• 2010

To analyze the effect of temperature on pavement types of dedicated lane, we have performed a temperature monitoring for pavements which were constructed in test track for Bimodal Tram. These pavements classified into four types; natural and artificial lawn, concrete and asphalt. Dedicated lane composed of natural and artificial lawn has a complex structure with concrete slab in contact surface of tires, and with 1m natural or artificial lawn in the middle part of lane. From monitoring results for pavements, dedicated lane with natural lawn shows lower temperature value compared with other dedicated lanes, and it is expected to decrease the heat island effect of conventional road if constructed.