• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1595-1596
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.1061-1062
• /
• 2010

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1063-1064
• /
• 2008

Bimodal tram has a carbody made of polymer composite material which is good electrical insulator. As an series hybrid type, Alternating voltage generated from generator coupled with CNG engine are rectified and transformed to variable voltage ranges which are applied to electrical apparatus and ECUs equipped inside of the tram. The failures of electrical insulation between high voltage($400V{\sim}800V$) and low voltage(24V) or between different kind of voltages such as AC and DC may cause some electrical interferences to prevent from operating rightly and other safety problem. This paper have investigated about the degradation factors of the electrical insulation and the earthing method available to bimodal tram, which is effective for preventing the electromagnetic interference coming from the inside or outside of tram but need some detecting measurements of earth leakage through electrical systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.143-146
• /
• 2008

With unexpected torrential rainfall, flash flooding is occurring frequently and its impacts are tremendous. Thus proper natural disaster management plans are required. The disaster management system of the Bimodal tram utilizes the SWMM as a core engine to simulate runoff and urban sewer networks for flooding simulation. To develop the efficient Bimodal tram disaster management system, very detailed subcatchment boundaries and flow networks have to be developed in a GIS data format. Thus the objective of this study is to develop ArcView GIS based module (AV2SWMM) for easy preparation of model input for the tram disaster management system. With the AV2SWMM module, very detailed subcatchment boundaries and flow networks can be developed for accurate simulation of flash flooding at the study site, which were not/hardly possible with SWMM 5.0 interface. The AV2SWMM can be used in developing accurate model input for other regions where the Bimodal tram system is expected to be introduced.

• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.91-98
• /
• 2014

In this study, the first and second electronically controlled cooling systems for a bimodal tram were developed. The performance characteristics of the cooling systems were assessed experimentally with actual and identical conditions, and a simulation was run using ANSYS Fluent. The results of the experimental and FEA method were standardized. In order to confirm the reliability of the experimental method, the experiment was carried out by a testing institution. The low-volume flow-rate condition was found to be better, but the cooling system performed in a minimal condition. Therefore, it is important to find the optimum performance levels. The cooling system equipment was revised to determine the optimized design parameters, after which the cooling performance levels increased at the radiation area. Specifically, with a greater fan diameter. Through this study, the newly developed cooling system will be reevaluated after being mounted on an actual bimodal tram. This will lead to a completely domestically produced bi-modal tram cooling system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1473-1474
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.1041-1042
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1553-1554
• /
• 2011

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1924-1934
• /
• 2011

This paper is concerned with the robustness evaluations of the guidance controller for a bimodal tram which is being developed by the Korea Railroad Research Institute (KRRI). The bimodal tram is an all-wheel steered multiple-articulated vehicle as a new kind of transportation vehicle. This vehicle has to be equipped with an automatic guidance system. In [1], such a controller has been recently proposed. However, since the performance is affected by weight change of the vehicle due to number of the passenger, model parameter uncertainties depending on the state of friction and the elasticity of the tire, and a typhoon, the controller designed must be examined with these conditions. As expected, because the vehicle dynamics is highly nonlinear, for the sake of investigating the robustness of the controller we compose two simulation ways based on the vehicle models which are implemented by the ADAMS and the MATLAB/LabVIEW toolboxes. Different uncertainties and a typhoon disturbance have been considered for the simulation conditions. Simulation results are shown.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1799-1804
• /
• 2009

최근 도입 논의가 활발히 이루어지고 있는 바이모달 트램은 버스와 경량전철의 중간 규모의 수요에 대하여 정시성, 효율성, 편리성을 갖춘 대중교통시스템으로 주목받고 있다. 특히 철도와 같이 물리적으로 분리된 전용로상에서 제어시스템과 운영시스템을 갖춰 운영할 수 있고, 일반도로에서도 버스와 같이 운영할 수 있는 장점이 있으나, 철도와 도로교통 관련 법령에서 정의되지 않고, 건설비에 대한 재정지원근 거가 없어 구체적인 도입계획이 수립되지 못하고 있다. 본 연구는 바이모달 트램 도입 활성화를 위한 제도 구축을 위하여 다음과 같은 분석을 수행하였다. 1) 바이모달 트램 도입 추진 현황을 파악하여 도입 활성화의 장애요소를 파악하고, 2) 바이모달 트램과 타 교통수단과의 특성 및 관련제도 분석을 통해 제도화에 필요한 요소를 파악하며, 3) 해외의 제도 사례를 통해 국내 도입 활성화에 필요한 제도적 필요 요소률 분석하였다.