• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.408-417
• /
• 2023

This study aimed to investigate the effects of an aquaponics system utilizing catfish recirculating water on the growth and water quality in lettuce and chicory cultivation. After 60 d of catfish cultivation in the BFT-AP, the survival rate was 96.0% and average weight gain was 178.5 g. The WGR grew by 241.4% and the SGR was 3.0%. A comparison between lettuce and chicory cultivation using BFT-AP and hydroponics revealed significant increases in shoot height, leaf count per week, and biomass of the cultivated lettuce and chicory. The SPAD values also increased significantly by 15.4-43.3%. Water quality analysis of the BFT-AP systems and crop cultivation beds showed significant differences, except for K and Na. The average NO₃^- concentration in the sediment pond was significantly higher at 45.3±1.0. Comparison of water temperature, pH, EC, DO, and ORP in the BFT-AP system and crop cultivation beds revealed similar monthly water temperatures from July to September. The pH in the catfish culture pond was 0.3-1.2 lower than that in the crop cultivation beds, and the EC was approximately 0.01- 0.03 dS/m lower in the catfish culture pond than the crop cultivation beds. The monthly average ORP in the catfish culture bed steadily increased to 479.9 mV in October. Bacillus velezensis (AFB2-2) and Chlorella fusca (CF) were applied to the biological activation bed; the population density of CF showed a continuous increase, whereas that of AFB2-2 decreased after 15 d and gradually increased thereafter. Thus, the application of the recirculating aquaponics cultivation technology with catfish (BFT) enhances catfish cultivation and promotes the growth of lettuce and chicory. Therefore, it is considered suitable for the environment-friendly cultivation of lettuce and chicory.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.4
• /
• pp.341-346
• /
• 2004

To determine lethal temperature of birdsfoot trefoil(BFT) and italian ryegrass(IRG) at heat-stressed conditions, seedlings grown in a small pots fur 4 weeks were subjected to different temperature regimes of heat treatment. No apparent damage was observed BFT and IRG were treated at 45, 50 or $60^{\circ}C$ for 1 h. And also heat treatments at 60, 65 and $70^{\circ}C$ for 1 h, both of them were withered and showed damage symptom on their leaves but it was not lethal conditions for the whole plants. By contrast, most of plants were prominently withered within one day after heat treatment at $80^{\circ}C/60min$. When BFT was exposed to $80^{\circ}C/60$ min, they were died within 6 days but there was found that new shoots were regenerated from the plants that had been treated at $80^{\circ}C$ within 55 min. IRC was also died within 2 days that exposed to $80^{\circ}C/20$ min but there was found that new shoots were regenerated from the plants that had been treated at $80^{\circ}C$ within 15 min. These results indicate that heat killing temperatures of BFT and IRG plants are $80^{\circ}C/60$ min an $80^{\circ}C/20$ min respectively. Simple viability assay system established in this study will be useful for selection and characterization of heat-tolerant transgenic BFT and IRG plants.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.926-935
• /
• 2015

The efficiency of genome-wide association analysis (GWAS) depends on power of detection for quantitative trait loci (QTL) and precision for QTL mapping. In this study, three different strategies for GWAS were applied to detect QTL for carcass quality traits in the Korean cattle, Hanwoo; a linkage disequilibrium single locus regression method (LDRM), a combined linkage and linkage disequilibrium analysis (LDLA) and a $BayesC{\pi}$ approach. The phenotypes of 486 steers were collected for weaning weight (WWT), yearling weight (YWT), carcass weight (CWT), backfat thickness (BFT), longissimus dorsi muscle area, and marbling score (Marb). Also the genotype data for the steers and their sires were scored with the Illumina bovine 50K single nucleotide polymorphism (SNP) chips. For the two former GWAS methods, threshold values were set at false discovery rate <0.01 on a chromosome-wide level, while a cut-off threshold value was set in the latter model, such that the top five windows, each of which comprised 10 adjacent SNPs, were chosen with significant variation for the phenotype. Four major additive QTL from these three methods had high concordance found in 64.1 to 64.9Mb for Bos taurus autosome (BTA) 7 for WWT, 24.3 to 25.4Mb for BTA14 for CWT, 0.5 to 1.5Mb for BTA6 for BFT and 26.3 to 33.4Mb for BTA29 for BFT. Several candidate genes (i.e. glutamate receptor, ionotropic, ampa 1 [GRIA1], family with sequence similarity 110, member B [FAM110B], and thymocyte selection-associated high mobility group box [TOX]) may be identified close to these QTL. Our result suggests that the use of different linkage disequilibrium mapping approaches can provide more reliable chromosome regions to further pinpoint DNA makers or causative genes in these regions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.12
• /
• pp.1724-1727
• /
• 2001

A trial was conducted to evaluate the growth performance and carcass characteristics of LW ${\times}$ Mukota $F_1$ crosses when fed diets containing graded levels of maize cob meal. Sixteen LW ${\times}$ Mukota $F_1$ crossbred pigs of approximately 4.5 months of age, were randomly allocated to four diets that contained 0, 100, 200 and 300 g maize cobs/kg, which corresponded to 276.4, 360.3, 402.9 and 523.5 g NDF/kg, respectively. The pigs were fed ad libitum for 14 weeks. The diets were formulated to contain similar levels of energy (ca. 9MJ ME/kg) and protein (ca.160 g CP/kg). Average daily feed intake (ADFI), daily gain (ADG) and feed conversion ratio (FCR) were monitored for 14 weeks. At slaughter, the cold dressed weight (CDM) and backfat thickness (BFT) were determined. There was no significant linear relationship (p>0.05) between level of cob inclusion and ADFI. The ADG decreased as level of maize cobs increased (p<0.001). The pigs that were on 300 g cobs/kg had the highest FCR (p<0.05) as compared to pigs on the other three diets. No differences (p>0.05) were observed in the CDM between pigs that were fed diets that had 0 and 100 g maize cobs/kg. In addition, pigs on 100 and 200 g cobs/kg diets had the same CDM (p>0.05). The diet that contained 300 g cobs/kg gave the lowest (p< 0.001) CDM. Both BFT parameters showed a decrease (p<0.05) as level of maize cobs increased. An increase in CDM was associated with an increase in BFT (p<0.001), with the correlation coefficient between K7.5 and CDM being 0.84 (p<0.001). It can, therefore, be concluded that crossbred pigs perform well on diets containing up to 200 g/kg maize cobs.

• Journal of Animal Science and Technology
• /
• v.47 no.2
• /
• pp.261-270
• /
• 2005

Total number of 237 Hanwoos were purchased from the nationwide fanns based on the different market weights and sex. After slaughtering, they were evaluated to estimate the productivity of carcass components by the sex and market weight, and to predict the beef carcass yield grade equation. The main results in this study were summarized as follows; With respect to carcass characteristics, the yield percentages were different(P < 0.01) among sex groups, but were not different among market weight groups. Sex or market weights showed significant effects on the carcass yield grade(YG) factors(BFT, RA, carcass weight(CW). The YG equation from this study could be expressed as a multiple regression y = 64.74 - 0.0198 ${\times}$ CW(kg) - 5.226 $\time$ BFT(cm)+0.1339 $\time$ RA($cm^2$ $R^2$ = 0.52 Among the YG factors, the BFT was the highest contributor to the YG equation. Compared the previous equation reported in 1992 with the equation from this study, the bias values between predicted value and the actual cutability were 9.17 and 2.39, respectively. In conclusion, the equation estimated from this study was more accurate in predicting the cutability than that from the previous equation reported in 1992.

• Journal of Animal Science and Technology
• /
• v.58 no.4
• /
• pp.15.1-15.6
• /
• 2016

Background: Our previous study had identified the SNP (g.81966377T > C) and indel (g.81966364D > I) located in the promoter of APM1 to have a significant effect on marbling in Hanwoo. APM1 encodes an adipocytokine called adiponectin, which plays a significant role in lipogenesis. The aim of this study was to verify and validate the effect of the SNP and indel on marbling and other carcass traits in a large, representative, countrywide population of Hanwoo cattle. The carcass traits measured were marbling (MAR), backfat thickness (BFT), loin eye area (LEA), and carcass weight (CAW). Results: Primers were designed to amplify 346 bp of the genomic segment that contained the targeted SNP (g.81966377) and the indel (g.81966364). After data curation, the genotypes of 8,378 individuals identified using direct sequencing analysis estimated frequencies for C (0.686) and T (0.314) respectively showing genotype frequencies for CC (0.470), CT (0.430) and TT (0.098). The genotypes were significantly associated with MAR, BFT and LEA. The indel had significant effect on marbling (P < .0001) with strong additive genetic effects. The allele frequencies was estimated at (DEL, 0.864) and insertion (INS, 0.136) presenting genotypes of D/D (75.63 %), D/I (21.44 %), and I/I (2.92 %). Significant departure from Hardy-Weinberg equilibrium was not detected for both the SNP and the indel. Conclusion: The SNP genotypes showed significant association with MAR, BFT and LEA with strong additive genetic effects, while the indel was significantly associated with MAR. The results confirmed that the variants can be used as a genetic marker for improving marbling in Hanwoo.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1657-1663
• /
• 2019

Objective: A genome-based best linear unbiased prediction (GBLUP) method was applied to evaluate accuracies of genomic estimated breeding value (GEBV) of carcass and reproductive traits in Berkshire, Duroc and Yorkshire populations in Korean swine breeding farms. Methods: The data comprised a total of 1,870, 696, and 1,723 genotyped pigs belonging to Berkshire, Duroc and Yorkshire breeds, respectively. Reference populations for carcass traits consisted of 888 Berkshire, 466 Duroc, and 1,208 Yorkshire pigs, and those for reproductive traits comprised 210, 154, and 890 dams for the respective breeds. The carcass traits analyzed were backfat thickness (BFT) and carcass weight (CWT), and the reproductive traits were total number born (TNB) and number born alive (NBA). For each trait, GEBV accuracies were evaluated with a GEBV BLUP model and realized GEBVs. Results: The accuracies under the GBLUP model for BFT and CWT ranged from 0.33-0.72 and 0.33-0.63, respectively. For NBA and TNB, the model accuracies ranged 0.32 to 0.54 and 0.39 to 0.56, respectively. The realized accuracy estimates for BFT and CWT ranged 0.30 to 0.46 and 0.09 to 0.27, respectively, and 0.50 to 0.70 and 0.70 to 0.87 for NBA and TNB, respectively. For the carcass traits, the GEBV accuracies under the GBLUP model were higher than the realized GEBV accuracies across the breed populations, while for reproductive traits the realized accuracies were higher than the model based GEBV accuracies. Conclusion: The genomic prediction accuracy increased with reference population size and heritability of the trait. The GEBV accuracies were also influenced by GEBV estimation method, such that careful selection of animals based on the estimated GEBVs is needed. GEBV accuracy will increase with a larger sized reference population, which would be more beneficial for traits with low heritability such as reproductive traits.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.613-620
• /
• 2008

The genetic parameters used in National Hanwoo Genetic Evaluation(NHGE) were needed to be monitored and updated periodically for accounting any possible changes in population parameters due to selection and environmental changes. Genetic parameters were estimated with single and two-trait models with MTDFREML package using 2,791 carcass records of steers collected from Hanwoo Progeny Test Program(HPTP). Single and two-trait models gave similar parameter estimates for all traits. The heritability estimates from single and two-trait models for carcass weight(CW), dressing percentage(DP), eye muscle area(EMA), back fat thickness(BFT) and marbling score(MS) were 0.30, 0.30, 0.37, 0.44 and 0.44, respectively. The heritability estimates for all the traits except BFT were slightly lower than those used in NHGE but seemed to be within the acceptable ranges. However, further monitoring is needed because the data might not have fully reflected the changes such as carcass grading standards in performance testing program. In order to shift statistical model of NHGE from single trait model to multiple-trait model, the genetic correlations between carcass traits were estimated with pairwise two-trait models. The genetic correlation coefficients between CW and DP, between CW and EMA, between CW and BFT and between CW and MS were 0.44, 0.63, 0.17 and 0.06, respectively. Those between DP and EMA, between DP and BFT and between DP and MS were 0.29, 0.40 and 0.20. Those between EMA and BFT and between EMA and MS were －0.24 and 0.15, respectively. The genetic correlation coefficient between BFT and MS was 0.03.

• Journal of Animal Science and Technology
• /
• v.52 no.4
• /
• pp.259-264
• /
• 2010

This study was carried out to estimate genetic parameters and breeding values of Hanwoo cows for carcass traits. Carcass records were collected from Korean steers raised at the private farms located in rural area of Gangwon-do and slaughtered from December 2004 to June 2008 at the three slaughter houses near fattening farm. The results obtained in this study were summarized as follows; The means and standard deviations of the carcass traits were $5.57{\pm}2.01$ for marbling score (MS), $10.87{\pm}4.06mm$ for backfat thickness (BFT), $87.87{\pm}9.07cm^2$ for eye muscle area (EMA), $426.75{\pm}49.27kg$ for carcass weight (CW), and $65.80{\pm}3.80$ for yield index (YI). Heritability estimates using single trait analyses were 0.36 for MS, 0.35 for BFT, 0.24 for EMA, 0.29 for CW, and 0.40 for YI, respectively. Genetic correlation coefficients of MS with BFT, EMA, CW, and YI were -0.21, 0.30, -0.21 and 0.30, and those of BFT with EMA, CW and YI were -0.12, 0.57 and -0.97, and those of EMA with CW and YI were 0.32 and 0.27, respectively. And genetic correlation of CW with YI was -0.62. Single trait selection for MS might lead to reducing BFT, but might be an obstacle to increase CW due to negative genetic correlations of MS with BFT and CW.

• Food Science of Animal Resources
• /
• v.31 no.2
• /
• pp.280-289
• /
• 2011

Analyses were conducted to estimate the effect of backfat thickness (BFT) on carcass grade factors and carcass price in Hanwoo cows and steers. Data on grade factors and prices were collected from 69,159 Hanwoo carcasses (n = 13,376 cows, n = 55,783 steers) abtained at the Nonghyup Seoul slaughter house in 2009. Carcass BFTs were divided into nine categories from ${\leq}$ 3 mm to ${\qeq}$ 25 mm. The average BFTs were 11.93 mm in cows and 12.57 mm in steers. An increase in the BFT resulted in an increase in carcass weight, loin-eye area, skeletal maturity, fat color, but decreases in the yield index and yield grade (from grade A to C) in cows and steers. Carcass unit price (Won/kg) improved if the carcass was sold with a BFT of 13-15 mm in cows and 10-12 mm in steers. Marbling score and quality grade increased significantly to 21 mm BFT but decreased from a BFT of 22 mm in cows and steers. BFT was significantly correlated with yield index (cow, r = $-0.97^{**}$; steer, r = $-0.96^{**}$), marbling score (cow, r = $0.20^{**}$; steer, r = $0.14^{**}$), and carcass price (cow, r = $0.03^{**}$; steer, r = $-0.11^{**}$). These results could be used as a fundamental dataset for further research to increase the productivity of Hanwoo carcasses.