• Journal of Surface Science and Engineering
• /
• v.47 no.2
• /
• pp.68-74
• /
• 2014

The seed step-coverage enhancement process (SSEP) using Pd/Cu/PVP colloids was investigated for the filling of through silicon via (TSV) without void. TEM analysis showed that the Pd/Cu nano-particles were well dispersed in aqueous solution with the average diameter of 6.18 nm. This Pd/Cu nano-particles were uniformly deposited on the substrate of Si/$SiO_2$/Ti wafer using electrophoresis with the high frequency Alternating Current (AC). After electroless Cu deposition on the substrate treated with Pd/Cu/PVP colloids, the adhesive property between deposited Cu layer and substrate was evaluated. The Cu deposit obtained by SSEP with Pd/Cu/PVP colloids showed superior adhesion property to that on Pd ion catalyst-treated substrate. Finally, by implementing the SSEP using Pd/Cu/PVP colloids, we achieved 700% improvement of step coverage of Cu seed layer compared to PVD process, resulting in void-free filling in high aspect ratio TSV.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.6
• /
• pp.689-702
• /
• 2019

This paper deals with the verification of the functions about mining robot, which is the system for developing deep seabed resources by applying V&V(verification and validation). In order to overcome water pressure of 500 bar and to travel on soft ground, and to operate in deep sea environment with bad conditions, it is necessary to develop a robot that can satisfy various deepsea conditions. A mining robot has been developed based on simulation based design and Multidisciplinary design optimization. In order to verify the developed robot, lab test and real sea test should be performed for various marine environment conditions. There are too many requirements to consider, such as space, time, cost, personnel, and environment to do performance test. So it is costly and time consuming for developing robot. In order to solve this problems, V&V technique was applied to mining robot. The stages of mining robot design, fabrication and commission were verified.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.318-325
• /
• 2019

This study analyzes current self-nail tips and nail-tip satisfaction. The study method selected from 3 domestic and 3 overseas companies analyzed current self-nail tips based on brand recognition and sales rate. A questionnaire was conducted on 261 adult women in their 20s and 50s about the satisfaction of nail care and self-nail tips. The results are as follows. As a result to analyze the current nail tips, there were products that did not contain the type of nail tip or the composition and ingredients of the glue. An online survey of the sizes of the current nail tips indicated differences in the sizing system method and that the presented sizes are different. The response rate was the highest for the survey results on why self-nail tips were preferred for respondents who prefer self-nail tips because the price was cheap. The reason why they did not prefer self-nail tips was that the degree of completeness was lower and the fitness was not good. In addition, it showed a high response rate in that the adhesive strength was poor and the size did not fit the nails. Therefore, it is necessary to develop a size for nail types by ergonomic design and develop a self-nail tip that can reduce nail damage.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.810-825
• /
• 2021

This study measured and analyzed clothing pressure at each measurement part of commercial body shapers to provide basic information for product design and clothing pressure standard and level. This study used five body shaper. Clothing pressure measurements were taken at 18points: Anterior area 8points, lateral area 5points, posterior area 5points. The findings of this study were as follows. As a result of measuring the clothing pressure, the body shaper 1 showed the highest pressure, and body shaper 5 showed the lowest pressure at almost of the measurement points of the three body types. In some cases, body shapers 2, 3, and 4 showed different orders of pressure depending on the measurement point. The highest measured values in most body shapers were the P1 shoulder area and the P2 bust area. The lowest measurement area differed by body type, but mainly P3 underbust area, P4 thorax area and P9 axillary area, P11 waist lateral area, P13 hip lateral area. These body shapers showed different results depending on the the manufacturers and body type of middle-aged women, and because there was no standard for the pressure value. Therefore, it is necessary to design a body shaper sizing system after accurately setting the clothing pressure value for each body part of the consumer.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.226-236
• /
• 2021

The purpose of this study was to classify the torso shape based on abdominal protrusion caused by changes in the physical characteristics of middle-aged women. This study analyzed 3D shape data of 401 females ranging in age from 40 to 59 years who participated in the 6th Size Korea project. Based on the Size Korea 3D measurement standard, 27 additional items such as height, protrusion, and angle were measured in the 3D scan data. Nine factors were extracted from the analysis of constituent factors of the torso: "vertical size of torso," "flatness and protrusion of abdomen," "torso front extrusion," "upper body height," "bust size and flatness," "size of belly and angle of lower abdomen," "hip length," "hip flatness," and "horizontal size of bust." As a result of the cluster analysis using these nine factors, the torsos of middle-aged women were classified into three types. Type 1 has upper abdominal deposition with a small and long upper body and an advanced abdomen; type 2 has lower abdominal deposition with a small and short torso and a small belly and hip flexion; and type 3 has central abdominal deposition with a big and long torso, large breasts, and protruding abdo¬men front. The middle-aged women were mostly distributed in Type 2. The above results will be useful as basic data for the development of clothing with improved fit to accommodate the changed physical characteristics of middle-aged women.

• Journal of Ginseng Research
• /
• v.47 no.2
• /
• pp.255-264
• /
• 2023

Background: Red ginseng (RG) alleviates psychiatric disorders. Fermented red ginseng (fRG) alleviates stress-induced gut inflammation. Gut dysbiosis causes psychiatric disorders with gut inflammation. To understand the gut microbiota-mediated action mechanism of RG and fRG against anxiety/depression (AD), we investigated the effects of RG, fRG, ginsenoside Rd, and 20(S)-β-D-glucopyranosyl protopanaxadiol (CK) on gut microbiota dysbiosis-induced AD and colitis in mice. Methods: Mice with AD and colitis were prepared by exposing to immobilization stress (IS) or transplanting the feces of patients with ulcerative colitis and depression (UCDF). AD-like behaviors were measured in the elevated plus maze, light/dark transition, forced swimming, and tail suspension tests. Results: Oral gavage of UCDF increased AD-like behaviors and induced neuroinflammation, gastrointestinal inflammation, and gut microbiota fluctuation in mice. Oral administration of fRG or RG treatment reduced UCDF-induced AD-like behaviors, hippocampal and hypothalamic IL-6 expression, and blood corticosterone level, whereas UCDF-suppressed hippocampal BDNF⁺NeuN⁺ cell population and dopamine and hypothalamic serotonin levels increased. Furthermore, their treatments suppressed UCDF-induced colonic inflammation and partially restored UCDF-induced gut microbiota fluctuation. Oral administration of fRG, RG, Rd, or CK also decreased IS-induced AD-like behaviors, blood IL-6 and corticosterone and colonic IL-6 and TNF-α levels, and gut dysbiosis, while IS-suppressed hypothalamic dopamine and serotonin levels increased. Conclusion: Oral gavage of UCDF caused AD, neuroinflammation, and gastrointestinal inflammation in mice. fRG mitigated AD and colitis in UCDF-exposed mice by the regulation of the microbiota-gut-brain axis and IS-exposed mice by the regulation of the hypothalamic-pituitary-adrenal axis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.91-104
• /
• 2022

The operational design domain (ODD) of autonomous vehicles needs to be expanded on highways and urban roads in light of the substantial commercialization of Level 3 autonomous vehicles. Therefore, this study developed a specific infrastructure autonomous vehicle-based cooperative driving service to ensure the driving safety of autonomous vehicles on city roads. The traffic operation efficiency, safety evaluation, and core evaluation indices for each service were selected and analyzed to study the effect of each service. The result of the analysis confirmed that the traffic operation efficiency and safety of autonomous vehicles were improved through the V2X communication-based autonomous cooperative driving service. On the whole, the significance of this study is in deriving the effect of the autonomous cooperative driving service based on V2X communication on urban roads with interrupting traffic flow.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.5
• /
• pp.1227-1236
• /
• 2024

This paper is a basic test study for the performance verification of equipment and facilities used in extreme environmental conditions, and includes research using a chamber that can artificially create a low-temperature environment. The facility can create a temperature environment from room temperature to -65℃ and is constructed to create special environments such as wind speed, artificial snow removal, and artificial ice removal. By artificially creating a polar environment below -40℃ and verifying it through installation and preliminary performance tests of the equipment, it is possible to identify potential risk factors that may occur at the work site in advance and prepare for safety accidents. The temperature distribution was observed when descending to a low temperature in a limited space in the chamber, and how the flow changes when the wind speed is applied. Based on this study, we plan to analyze the effects of implementing special environments such as artificial snow removal and artificial ice removal in the future.

• Korean Journal of Ichthyology
• /
• v.28 no.2
• /
• pp.125-133
• /
• 2016

Sharks (Selachii) comprising about 510 valid species worldwide. Forty-three shark species belonging to 30 genera, 19 families and 8 orders have been found in Korean coastal waters, and all these are registered at the IUCN Red List as followings: endangered (EN) 1 species (2.3%) (vs. worldwide 15 spp., 3.2%), vulnerable (VU) 11 spp. (25.6%) (vs. 48 spp., 10.3%), near threatened (NT) 10 spp. (23.3%) (vs. 67 spp., 14.4%), least concern (LC) 9 spp. (20.9%) (vs. 115 spp., 24.7%), data deficient (DD) 12 spp. (27.9%) (vs. 209 spp., 44.9%), and critically endangered (CR) absent (vs. 11 spp., 2.4%). Twelve species among 43 sharks distributing in Korean waters are assessed as Threatened in the IUCN Red List categories and criteria as followings: Sphyrna lewini (EN, A2bd+4bd), Rhincodon typus (VU, A2bd+3d), Cetorhinus maximus (VU, A2ad+3d), Carcharodon carcharias (VU, A2cd+3cd), Isurus oxyrinchus (VU, A2abd+3bd+4abd), Alopias pelagicus (VU, A2d+4d), A. vulpinus (VU, A2bd+3bd+4bd), Carcharhinus plumbeus (VU, A2bd+4bd), S. zygaena (VU, A2bd+3bd+4bd), Squalus suckleyi (VU, A2bd+3bd+4bd), Squatina japonica (VU, A2d+4d), and S. nebulosa (VU, A2d+4d). Eighteen chondrichthyan species are registered in the list of the CITES Appendices, among them five sharks are distributing in Korean waters as Appendix II, i.e., R. typus, C. maximus, C. carcharias, S. lewini and S. zygaena. The scientific name of "Gobsangeo" has been changed from Squalus acanthias of the North Pacific to S. suckleyi, and "Mojorisangeo" from S. megalops of the Northwest Pacific to brevirostris.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.2
• /
• pp.196-204
• /
• 2011

Heat-moisture treatment (HMT) was applied to 4 samples of rice flours, Goami (GM), Taeguk (TG), Choochung (CC) and Koshihikari (KSHK), of which amylose contents were 31.5, 32.3, 24.3, and 23.3%, respectively. Wet-milled rice flours were dried, moisture content adjusted to 21, 24, 27 and 30%, respectively, and autoclaved at 100 and $105^{\circ}C$ for 30~90 min. The changes on swelling, solubility, RVA (rapid visco analyser) paste viscosities and gel strength were observed. In GM and TG, peak viscosity (PV) and breakdown (BD) decreased and no peak appeared as moisture and treatment time increased by HMT. In CC, FV increased notably with big increase of PV and setback (SB) by HMT compared to the other rice flours. BD in all the samples decreased as moisture, temperature, and time increased by HMT. RVA pasting properties of HMT GM and HMT TG were changed remarkably under conditions of moisture 21%, $100^{\circ}C$ and 30 min whereas for HMT CC and HMT KSHK, higher temperature or more time was required at the same mois ture levels. The swelling power, solubility and gel strength increased by HMT. Gel strength correlated positively with SB (r=0.78, p<0.01) and negatively with BD (r=-0.71, p<0.01) and PV (r=-0.36, p<0.05) resulting from strengthening the structure of starch granules in rice flours by HMT.