• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1218-1226
• /
• 1999

In decoding the turbo codes, the sliding window BCJR algorthm, derived from the BCJR algorithm, permits a continuous decoding of the coded sequence without requiring trellis fermination of the constituent codes and uses reduced memory span. However, the number of computation required is greater than that of BCJR algorithm and no study on the effect of the window length has been reported. In this paper, we propose an eddicient sliding window type scheme which maintains the advantages of the conventional sliding window algorithm, reduces its computational burdens, and improves is BER performance. A guideline is first presented to determine the proper window length and then a computationally efficient sliding window BCJR algorithm is obtained by allowing the window to be forwarded in multi-step. Simulation results show that the proposed scheme outperforms the conventional sliding window BCJR algorithm with reduced complexity. It gains 0.1dB SNR improvements over the conventional method for the constraint length 3 and BER $10^{-4}$

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2094-2100
• /
• 2014

The performance of underwater acoustic communication system is sensitive to the inter-symbol interference due to delay spread develop of multipath signal propagation. Thus, it is necessary technique of equalizer and channel code to eliminate inter-symbol interference. In this paper, underwater acoustic communication system were analyzed by experiment using these techniques on the Kyeong-chun lake, Munkyeong City. Based on the results of experiment, we confirmed that the performance of the proposed iterative BCJR equalization method is improved by increasing the number of iterations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.63-70
• /
• 2016

To increase throughput efficiency and improve performance, FTN(Faster Than Nyquist) method and LDPC(Low Density Parity Code) codes are employed in DVB-S3 system. In this paper, we proposed efficient turbo equalization model to minimize inter symbol interference induced by FTN transmission. This paper introduces two conventional scheme employing SIC(Successive Interference Cancellation) and BCJR equalizer. Then, we proposed new scheme to resolve problems in this two conventional scheme. To make performance improved in turbo equalization model, the outputs of LDPC and BCJR equalizer are iteratively exchange probabilistic information. In fed LDPC outputs as extrinsic informa tion of BCJR equalizer. we split LDPC output to separate bit probabilities. We compare performance of proposed scheme to that of conventional methods through using simulation in AWGN(Additive White Gaussian Noise) channel. We confirmed that performance was improved compared to conventional methods as increasing throughput parameters of FTN.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.293-297
• /
• 2015

Underwater acoustic communications has been limited use for military purposes in the past. However, the fields of underwater applications expend to detection, submarine and communication in recent. The excessive multipath encountered in underwater acoustic communication channel is creating inter symbol interference, which is limiting factor to achieve a high data rate and bit error rate performance. To improve the performance of a received signal in underwater communication, many researchers have been studied for channel coding scheme with excellent performance at low SNR. In this paper, we applied BCJR decoder based ( 2,1,7 ) convolution codes and to compensate for the distorted data induced by the multipath, we applying the turbo equalization method. Through the underwater experiment on the Gyeungcheun lake located in Mungyeng city, we confirmed that turbo equalization structure of BCJR has better performance than hard decision and soft decision of Viterbi decoding. We also confirmed that the error rate of decoder input is less than error rate of $10^{-1}$, all the data is decoded. We achieved sucess rate of 83% through the experiment.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.487-492
• /
• 2013

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. In order to improve the performance, it is necessary to employ an iterative coding scheme. Among the iterative coding scheme, turbo codes, LDPC codes and convolutional code based on BCJR algorithm are dominant channel coding schemes in recent. Therefore this paper analyzed the performance of iterative codes based on turbo equalizer with the same coding rate and similar codeword length. The performances of three kinds of iterative codes were evaluated in the environment of underwater acoustic communication channel that are real data collected in Korean east sea. The distance of transmitter and receiver was 5Km and data rate was 1Kbps. As a result, convolutional code based on BCJR algorithm has better performance in underwater channel than turbo codes and LDPC codes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.409-411
• /
• 2013

In this paper, we used FTN(Faster than Nyquist) method that is transmission method faster than Nyquist theory. FTN signaling introduces intersymbol interference(ISI), but increases the bit rate while preserving the signaling bandwidth. Therefore, we need compensating ISI caused by FTN. In this paper, we propose decoding method for FTN signal that using BCJR Equalizer and Turbo Equalization. first ISI of inputted signal is restored by BCJR Equalizer, and then restored signal inputted in LDPC decoder, and repeat the process using the Turbo Equalization improves performance. finally, we shows performance comparison according to reduce percentage of FTN signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1323-1329
• /
• 2014

In this paper, we analyzed efficient decoding scheme with FTN (Faster than Nyquist) method that is transmission method faster than Nyquist theory and increase the throughput. we proposed viterbi equalizer model to minimize ISI (Inter-Symbol Interference) when FTN signal is transmitted. the proposed model utilized interference as branch information. In this paper, to decode FTN singal, we used turbo equalization algorithms that iteratively exchange probabilistic information between soft Viterbi equalizer (BCJR method) and LDPC decoder. By changing the trellis diagram in order to maximize Euclidean distance, we confirmed that performance was improved compared to conventional methods as increasing throughput of FTN signal.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.295-302
• /
• 2015

Acoustic channels are characterized by long multipath spreads that cause inter-symbol interference. The way in which this fact influences the design of the receiver structure is considered. To satisfy performance and throughput, we presented consecutive iterative BCJR (Bahl, Cocke, Jelinek, Raviv) equalization to improve the performance and throughput. To achieve low error performance, we resort to powerful BCJR equalization algorithms that iteratively update probabilistic information between inner decoder and outer decoder. Also, to achieve high throughput, we divide long packet into consecutive small packets, and the estimate channel information of previous packets are compensated to next packets. Based on experimental channel response, we confirmed that the performance is improved for long length packet size.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.1-4
• /
• 2004

We proposed a new type of timing recovery scheme to work with a system that uses BCJR (Bahl-Cocke-Jelinek-Raviv) decoding algorithm and BPSK modulation. The unknown timing offset is estimated by the modified Mueller and $M\ddot{u}ller$ estimator with the aid of the decoder. Timing offset can be acquired as soon as the symbols are received and be updated symbol by symbol. The simulation results for turbo codes whose decoder uses BCJR algorithm show a satisfactory performance even in case of severe timing jitter.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.45-49
• /
• 2016

The performance of underwater acoustic communication systems is sensitive to inter-symbol interference caused by delay spread developed from multipath signal propagation. The multipath nature of underwater channels causes signal distortion and error floor. In order to improve the performance, it is necessary to employ an iterative coding scheme. Of the various iterative coding schemes, turbo code and convolutional code based on the BCJR algorithm have recently dominated this application. In this study, the performance of iterative codes based on turbo equalizers with equivalent coding rates and similar code word lengths were analyzed. Underwater acoustic communication system experiments using these two coding techniques were conducted on Kyeong-chun Lake in Munkyeong City. The distance between the transmitter and receiver was 400 m, and the data transfer rate was 1 Kbps. The experimental results revealed that the performance of turbo codes is better for channeling than that of convolutional codes that use a BCJR decoding algorithm.