• 제목/요약/키워드: BCH Code

검색결과 67건 처리시간 0.023초

Optimal Watermark Coefficient Extraction by Statistical Analysis of DCT Coefficients (DCT 계수의 통계적 분석을 통한 최적의 워터마크 계수 추출)

  • 최병철;김용철
    • Proceedings of the IEEK Conference
    • /
    • 대한전자공학회 2000년도 추계종합학술대회 논문집(3)
    • /
    • pp.69-72
    • /
    • 2000
  • In this paper, a novel algorithm for digital watermarking is proposed. We use two pattern keys from BCH (15, 7) code and one randomizing key. In the embedding process, optimal watermark coefficients are determined by statistical analysis of the DCT coefficients from the standpoint of HVS. In the detection, watermark coefficients are restored by correlation matching of the possible pattern keys and minimizing the estimation errors. Attacks tested in the experiments ate image enhancement and image compression (JPEG). Performance is evaluated by BER of the logo images and SNR/PSNR of the restored images. Our method has higher performance against JPEG attacks. Analysis for the performance is included.

  • PDF

A Low-Power Hybrid ARQ Scheme for RFID System (RFID 시스템을 위한 저전력 Hybrid ARQ 방식)

  • Choi, Sung-Hye;Joe, In-Whee
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 한국정보과학회 2005년도 한국컴퓨터종합학술대회 논문집 Vol.32 No.1 (A)
    • /
    • pp.265-267
    • /
    • 2005
  • RFID 시스템에서 소형화 추세 및 배터리 사용에 따라 태그 및 리더의 전송 전력을 최소화할 수 있는 저전력 설계가 반드시 필요하다. 또한 리더와 Tag는 무선으로 통신을 수행하며, 동시에 Tag는 이동성을 가지므로 에러율이 유선방식에 비해 상당히 높다. 그러나 현재 ISO표준에서는 에러발생시 MAC계층에서 단지 CRC체크 후 재전송을 하는 방식으로 에너지 효율성 및 전송효율이 떨어진다. 본 논문에서는 이 같은 문제를 해결하기 위해서 유통 물류 등에 사용되는 900MHz대역의 RFID시스템에서 에너지 소모 최소화와 신뢰성을 보장할 수 있는 방법으로 Hybrid ARQ를 제안한다. 기존의 Hybrid ARQ를 개선시켜 에너지 효율성을 고려한 최적패킷 길이를 사용하고, 에너지 소모가 적은 BCH Code를 채택한다. 성능 분석 및 시뮬레이션 결과, 제안하는 Hybrid ARQ 방식이 기존의 전송방식보다 에너지 효율성 및 신뢰성을 향상시킴을 보여준다.

  • PDF

Performance Comparison of EFTS According by Modulations and Channel Codes (변조 방식과 채널 코드에 따른 EFTS 성능 비교)

  • Kang, Sanggee
    • Journal of Satellite, Information and Communications
    • /
    • 제8권2호
    • /
    • pp.94-98
    • /
    • 2013
  • A report of security problems and simultaneous operation limits of Standard tone currently used for FTS introduces the development of a next generation FTS. In this paper, BER performance by modulations and channel coding methods for EFTS are compared. Simulation results show that coherent modulations have better BER performance than noncoherent modulations. However the environments of a lunching vehicle may cause serious problems in achieving and maintaining synchronization and the increasing complexity of coherent systems also increases reliability problems. Therefore noncoherent systems are suitable for FTS even though BER performace of noncoherent systems is lower than coherent systems. Noncoherent DPSK has better BER performance than noncoherent CPFSK. However the PEP of noncoherent DPSK is 0.8dB higher than noncoherent CPFSK. Therefore a transmitter of noncoherent DPSK has more output power than noncoherent CPFSK. Convoltional code has better BER performance than RS code. However RS code has a tendency of steeply decreasing BER near the wanted $E_b/N_0$.

Block Error Performance Evaluation of DS-CDMA System with Combined Techniques in Mobile Communication Channel

  • Kang, Heau-Jo;Roh, Jae-Sung;Cho, Sung-Joon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • 제6권8호
    • /
    • pp.1234-1240
    • /
    • 2002
  • In this paper, we analyze the block error performance of the CDMA system, whose information data are spread spectrum with PN sequences, and the chip signals are modulated with BPSK signal, combining MRC(Maximum Ratio Combine) diversity techniques with repetition transmission, FEC(Forward Error Correction) code in mobile communication channel which is characterized by Nakagami fading. As a results of study, the coding techniques provide more efficient improvement than a diversity techniques, but coding techniques are required the adding bandwidth as many coding rate. Also, when the system is combined MRC diversity techniques with coding techniques, the amount of improvement is dramatically increased.

A Two-Step Screening Algorithm to Solve Linear Error Equations for Blind Identification of Block Codes Based on Binary Galois Field

  • Liu, Qian;Zhang, Hao;Yu, Peidong;Wang, Gang;Qiu, Zhaoyang
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제15권9호
    • /
    • pp.3458-3481
    • /
    • 2021
  • Existing methods for blind identification of linear block codes without a candidate set are mainly built on the Gauss elimination process. However, the fault tolerance will fall short when the intercepted bit error rate (BER) is too high. To address this issue, we apply the reverse algebra approach and propose a novel "two-step-screening" algorithm by solving the linear error equations on the binary Galois field, or GF(2). In the first step, a recursive matrix partition is implemented to solve the system linear error equations where the coefficient matrix is constructed by the full codewords which come from the intercepted noisy bitstream. This process is repeated to derive all those possible parity-checks. In the second step, a check matrix constructed by the intercepted codewords is applied to find the correct parity-checks out of all possible parity-checks solutions. This novel "two-step-screening" algorithm can be used in different codes like Hamming codes, BCH codes, LDPC codes, and quasi-cyclic LDPC codes. The simulation results have shown that it can highly improve the fault tolerance ability compared to the existing Gauss elimination process-based algorithms.

Performance Analysis of a Mobile Stratospheric Communication System with Channel Codings over Rician Log-Normal Fading Channel Models (라이시안 로그노말 페이딩 채널 모델에서 채널 부호를 사용한 이동 성층권 통신 시스템의 성능 분석)

  • 강병권
    • Journal of the Institute of Convergence Signal Processing
    • /
    • 제3권4호
    • /
    • pp.67-73
    • /
    • 2002
  • There have been increased concerns on mobile stratospheric communication system(SCS) for the purpose of advanced service of personal and high speed communication systems. In fact, this SCS is considered and studied for IMT-2000 service by ITU. Although, it is important to make accurate channel model for prediction of the SCS performance, there is no measured channel data in this system. Thus, in this paper, we estimate the performance of SCS bye use of channel model provided by Corazza(2) and modified by You(3). And also, the effects of channel codings on system performance are analyzed by deriving bit error performance based on realistic Rician log-normal fading channel models. The performance results are divided into three kinds of areas with three kinds of elevation angles 20$^\cire$, 45$^\cire$, and 80$^\cire$. And also the effects of forward error correction channel codings on system performance with Hamming(7,4), HCH( IS,7) and convolutional code of constraint length 3 and code rate R=1/2.

  • PDF

Performance of 3D HDTV Transmission with Block LDPC Codes (블록 LDPC 부호를 사용한 3D HDTV 전송 성능개선 방안 연구)

  • Kim, Min-Ki;Kim, Dong Ho
    • Journal of Satellite, Information and Communications
    • /
    • 제8권4호
    • /
    • pp.21-25
    • /
    • 2013
  • The dual-stream based stereoscopic 3D HDTV broadcasting service was launched recently. Although the dual-stream based HDTV service has been successfully provided, the 3D HDTV broadcasting system requires more bandwidth efficient transmission schemes because it should convey both left and right HD resolution images simultaneously in the finite 6MHz bandwidth. In this paper, we consider more advanced ATSC transmission schemes that use higher modulation such as 16-QAM and concatenated RS code and block LDPC codes. Compared with conventional ATSC system and the modified ATSC system in [2], the proposed system has about 2.97dB and 1.12dB SNR gain at the payload data rate of 19.44Mbps compared with the existing ATSC system and the modified ATSC system [2]. Also, the proposed scheme requires only 1.05dB power increase for the 3D HDTV service, which is reasonable SNR increase value and applicable to the advanced 3D high definition broadcasting realization in limited 6MHz bandwidth.