• 제목/요약/키워드: BC analysis

검색결과 369건 처리시간 0.022초

농어촌지역 BcN 기반구축 사업타당성 분석 (An Analysis of BcN Feasibility of Area of Agricultural and Fishing Village)

  • 정우수
    • 한국통신학회논문지
    • /
    • 제33권6B호
    • /
    • pp.440-449
    • /
    • 2008
  • 본 논문은 정부의 광대역통합망(BcN) 구축의 일환으로서 농어촌지역의 BcN 기반구축 사업의 타당성 분석을 목적으로 한다. 사업타당성 분석을 위하여 새로운 평가지표를 도출하고 전문가설문을 활용한 AHP 기법을 사용하여 사업타당성을 평가하였다. 그리고, 관련 선행연구를 살펴봄으로써 적합한 평가지표를 도출하고 계층화 분석법(AHP)을 사용하여 BcN 사업타당성을 평가하도록 한다. 그 결과 주요 타당성 지표로서 경제적 타당성, 기술적 타당성, 정책적 타당성 등이 BcN 사업타당성 지표로 도출되었으며, 평가기준으로 이해되었다. 연구결과 사업시행은 타당한 것으로 나타났으며, 분석의 신뢰도를 나타내는 비일관성지수는 0.0566으로 낮게 나타났다. 그리고, 향후 BcN 구축사업이 국민의 생활개선 향상에 크게 기여할 것으로 기대된다. 또한 BcN 사업을 합리적으로 추진하기 위한 기초자료로서 가치가 있을 것이다.

미생물 셀룰로오스 생산을 위한 당밀의 전처리 및 생산된 셀룰로오스의 물리화학적 특성 (Pretreatment of Cane Molasses for Production of Bacterial Cellulose and Its Physico-Chemical Properties)

  • 정호일;정진하;전영동;이나리;박기현;김용균;박근태;손홍주
    • 생명과학회지
    • /
    • 제19권10호
    • /
    • pp.1432-1437
    • /
    • 2009
  • BC 합성능이 우수하며, 진탕배양에서도 BC를 생산할 수 있는 능력이 있음이 확인된 Aectobacter sp. V6로부터 BC 생산을 위한 당밀 전처리 조건을 검토하였으며, 생산된 BC의 물리화학적 특성을 검토하였다. 당밀을 배지성분으로 사용하기 위해 전처리를 실시한 결과, 1%의 TP가 BC 생산에 가장 효율적이었다. 전처리한 당밀배지를 이용하여 정치 및 진탕배양에서 생산된 BC의 물리화학적 특성을 조사한 결과, 모든 BC는 유화능이 있었으나 유화 안정능은 낮았다. 또한 모든 BC에서 높은 수분 보유능이 나타났으며, 특히 정치배양에서 생산된 BC는 $\alpha$-cellulose보다 14배 이상 높았다. BC의 점도는 모두 $\alpha$-cellulose보다 높았으며, 점도계 회전속도의 증가에 따라 급격히 감소하였다. FT-IR을 통한 조성 분석에서 BC는 식물성 셀룰로 오스와 차이가 없었으며, XRD를 통한 결정성 분석에서는 모든 BC가 결정성을 나타내었다. BC의 미세구조를 조사한 결과, 모든 BC가 미세망상구조로 이루어져 있었는데, 이로 인해 BC는 식물성 셀룰로오스와는 달리 독특한 물성을 가지는 것으로 판단되었다. 또한 정치배양에서 생산된 BC는 진탕배양에서 생산된 것보다 셀룰로오스 미세섬유가 조밀하게 얽혀있음을 알 수 있었다.

형질전환 담배 식물체에서 Glutathione Reductase 유전자의 발현 (Expression of Glutathione Reductase Gene in Transgenic Tobacco Plant)

  • 이효신;조진기
    • 식물조직배양학회지
    • /
    • 제28권2호
    • /
    • pp.87-90
    • /
    • 2001
  • 배추 유래의 cytosolic glutathione reductase 유전자 (BcGR1)의 지속적 발현과 형질전환 식물체의 oxidative stress에 대한 내성과의 관계를 분석하기 위하여, BcGR1 유전자를 CaMV 35S promoter의 하류에 연결한 다음, 담배에 형질전환하였다. PCR 및 Southern blot 분석을 통하여 BcGR1 유전자가 정상적으로 삽입된 32 계통의 T$_{0}$ 식물체를 선발하였다. Northern blot 분석 결과, 도입된 유전자가 형질 전환 식물체 내에서 항상적으로 발현된다는 것을 확인하였으며, 도입 유전자의 copy number와 발현량 사이에는 정의 상관관계를 보이지 않았다.

  • PDF

BC-B Type150K DWT Class Bulk carrier 구조적 특성에 관한 고찰 (A study of Analysis for 150K DWT Class Bulk carrier(BC-B type))

  • 서향덕;김도군;안형준
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2015년도 특별논문집
    • /
    • pp.79-84
    • /
    • 2015
  • A BC-B type bulk carrier is rarely built, so the structural characteristics is not reported and familiar so far. The biggest difference between BC-B and BC-A type vessel is applying alternate cargo loading, which density is over $1.0ton/m^3$. In this paper, 150K DWT class BC-B type bulk carrier is calculated and compared with BC-A type vessel, which has same condition such as main dimension and deadweight, about prescriptive rule and FEA based on CSR. And aspect ratio of target vessel is smaller than typical capsize bulk carrier, so 150K and 180K bulk carrier, which applied BC-A type, are also compared to find feature of wide beam vessel.

  • PDF

BcN에서의 침입감내를 위한 네트워크 디자인 연구 (Research on Network Design for Intrusion Tolerance of BcN)

  • 박현도;김수;이희조;임채태;원유재
    • 한국정보과학회논문지:정보통신
    • /
    • 제34권5호
    • /
    • pp.305-315
    • /
    • 2007
  • 광대역통합망(Broadband Convergence Network, BcN)은 전화, 인터넷, 방송 네트워크 등 개별적으로 운용되어오던 네트워크들을 하나의 통합망으로 구축, 구동, 관리하는 차세대 네트워크이다. 개별적으로 운용되어오던 네트워크들이 하나로 통합되면서 서비스 별로 산재해 있던 네트워크의 위협요소는 하나의 통합망에서 더욱더 위력적인 요소로 다가올 것이다. 본 논문에서는 BcN 서비스들이 악성 공격에 대해 지속적인 서비스 운영을 보장하기 위한 네트워크 디자인 방법을 제안한다. 본 연구는 서비스 시간과 공간 중요도를 바탕으로 BcN 필수 서비스 구성요소를 도출하고, 구성요소의 형태에 따라 서버 형태, 게이트웨이 형태, 복합 형태의 세 가지 타입으로 구분한다. BcN 환경에서 발생 가능한 공격 시나리오들을 통해 BcN 필수 서비스의 침입감내 기술 적용 방안을 모색한다. 이를 통하여 하드웨어 중복성과 Policy 서버의 보안 정책 설정을 통한 BcN 침입감내 네트워크 디자인을 제안한다. 본 논문에서는 제안한 프로토타입 네트워크를 BcN에 적용하기 전과 적용한 후 BcN에서 공격이 발생되었을 때의 시나리오를 통하여 BcN의 침입감내를 가능케 함을 보인다.

Diagnostic Significance of Apparent Diffusion Coefficient Values with Diffusion Weighted MRI in Breast Cancer: a Meta-Analysis

  • Sun, Jiang-Hong;Jiang, Li;Guo, Fei;Zhang, Xiu-Shi
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권19호
    • /
    • pp.8271-8277
    • /
    • 2014
  • Aims: Apparent diffusion coefficient (ADC) values of nodes in diffusion-weighted imaging (DWI) are widely used in differentiating metastatic from non-metastatic lymph nodes. The purpose of this meta-analysis was to demonstrate whether DWI could contribute to the precise diagnosis of breast cancer (BC) with and without lymph node metastasis (LNM). Materials and Methods: English and Chinese electronic databases were searched for relevant studies followed by a comprehensive literature search. Two reviewers independently assessed the methodological quality of the included trials based on the quality assessment of diagnostic accuracy studies (QUADAS). Summary odds ratios (ORs) and corresponding 95% confidence intervals (95% CIs) were calculated. Results: Final analysis of 624 BC subjects (patients with LNM = 254, patients without LNM = 370) were incorporated into the current meta-analysis from 9 eligible cohort studies. Combined ORs of ADCs suggested that ADC values in BC patients without LNM were higher than in patients with LNM (OR=0.56, 95%CI: 0.11-1.01, p=0.015). Subgroup analysis stratified by country indicated a low ADC value in BC patients with LNM rather than those without LNM among Chinese (OR=1.27, 95%CI: 0.89-1.66, p<0.001), Italians (OR=0.75, 95%CI: 0.13-1.38, p=0.018), and Egyptians (OR=1.27, 95%CI: 0.71-1.84, p<0.001). The findings of subgroup analysis by MRI machine type revealed that ADC values from diffusion MRI may be potential diagnostic indicators for BC using Non-Philips 1.5T (OR=1.10, 95%CI: 0.84-1.36, p<0.001). Conclusions: The main findings of our meta-analysis demonstrated that increased signal intensity on DWI and decreased signals on ADC are helpful in diagnosis of BC patients with or without LNM. DWI could therefore be an important imaging investigation in patients suspected of BC.

임의의 경계조건을 갖는 철근 콘크리트 사판의 해석 (An Analysis of the R/C Skew-Plates With Arbitrary Boundary Conditions)

  • 조현영;조진구
    • 한국농공학회지
    • /
    • 제28권4호
    • /
    • pp.49-56
    • /
    • 1986
  • This study was carried out to investigate mechanical characteristics of the uniformly loaded skew-plate at 4 kinds of boundary condition : i) all edges are clamped (BC-1) , ii) all edges are simply supported (BC- 2), iii) two opposite edges are clamped and the other two edges are free (BC-3), and iv )two opposite edges are simply supported and the other two edges are free (BC-4). Various skew angles, 0$^{\circ}$, 10$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$, 40: 45: and 60, of the plate were tested for the above boundary conditions. Resutts obtained from the study are summarized as follows ; 1.The lateral displacement at the center of a skew- plate was decreased as the skewangle increased at all of the boundary conditions. The decrements of the conditions of BC-3 and BC-4 were considerable. And, difference of the displacement between the boundary conditions was decreased as the skew-angle was increased. 2. X-moments (to the Y-axis) at the center of a skew- plate and the minimum principal moments were shown as a similar pattern of change with respect to the skew-angle variation between BC-i and BC-2 and between BC-3 and BC-4, and the pattern of change at the conditions of BC-3 and BC-4 were shown higher rates than those for the conditions of BC-i and BC-2 3.Y-moments (to the X- axis) at the center of a skew-plate and the maximum principal moment were decreased as the skew-angle increased in a similar pattern at all of the boundary conditions. 4.X-moments at the obtuse angle side of a skew-plate were shown as a parabolic pattern of change (frist increased after then decreased) as the skew-angle increased, and a skew-angle resulting the maximum absolute moment was depended on the boundary conditions. 5.Y-moments at the obtuse angle side of a skew-plate were affected by the skewangle much more at the boundary condtions of BC-2 and BC-4 than at the conditions of BC-i and BC-3. 6.Maximum principal moments at the obtuse angle side of a skew-plate at the skew angle of 40$^{\circ}$- 45$^{\circ}$ were resulted almost the same value at all of the boundary conditions .

  • PDF

영산강 유역 범람원 퇴적물의 화분분석 연구 (Vegetation History since the Mid-Lateglacial from Yeongsan River Basin, Southwestern Korea)

  • 최기룡;김기헌;김종원;김종찬;이기길;양동윤;남욱현
    • The Korean Journal of Ecology
    • /
    • 제28권1호
    • /
    • pp.37-43
    • /
    • 2005
  • 한반도 남서부 저지대의 식생변천사를 밝히기 위하여 영산강유역 범람원 퇴적물의 화분분석과 AMS 측정을 실시하였다. 그 결과 BS 1. 12,222cal BC$\sim$9,160cal BC: 냉온대 북부/고산지 침엽 활엽혼합림, BS 2. 9,160cal BC$\sim$4,210cal BC: 냉온대 중부/산지 낙엽활엽수림, BS 3. 4,210cal BC$\sim$125cal BC: 냉온대 남부/저산지 침엽 활엽혼합림, BS 4. 125cal BC$\sim$현재: 난온대/냉온대 남부/저산지 침엽수림의 식생변천과정을 밝힐 수 있었다. 소나무림의 증가는 4,210cal BC부터 이며 벼농사 개시 시기는 2,120cal BC부터 집약적으로 이루어지기 시작하였음을 밝혔다. 또한 후빙기 후기 소나무림의 급격한 증가는 농경의 집약화와 관계가 있음을 알 수 있었다.

Ex situ Coloration of Laccase-Entrapped Bacterial Cellulose with Natural Phenolic Dyes

  • Kim, Hyunjin;Song, Ji Eun;Kim, Hye Rim
    • 한국의류학회지
    • /
    • 제45권5호
    • /
    • pp.866-880
    • /
    • 2021
  • This study aimed to ex situ colorize laccase-entrapped bacterial cellulose (BC) with natural phenolic dyes, namely,madder, turmeric, and cochineal, and to determine the effect of laccase entrapment on the dyeability of BC using color strength (K/S) analysis. Results showed that laccase entrapment improved the dyeability of BC and that pre-entrapment was the most effective method, compared with meta-entrapment and post-entrapment methods. In addition, surface characterizations confirmed the successful entrapment of laccase inside the BC nanostructure and retention of the cellulosic and crystalline structures of BC. The washing durability test confirmed that the K/S value of BC had improved after laccase entrapment. Furthermore, laccase-entrapped BC colorized with cochineal dye had the highest washing durability due to the high molecular weight of cochineal dyerelative to the other dyes. This study suggests a novel method for enhancing the dyeability and washing durability of BC colorized ex situ with natural phenolic dyes by laccase entrapment.

Graphene의 플라즈마 표면 개질과 박테리아 셀룰로오스와의 결합성 검토 (Plasma Surface Modification of Graphene and Combination with Bacteria Cellulose)

  • 임은채;김성준;오일권;기창두
    • Korean Chemical Engineering Research
    • /
    • 제51권3호
    • /
    • pp.388-393
    • /
    • 2013
  • 본 연구에서는 물리적 강도가 강한 천연 고분자인 박테리아 셀룰로오스(BC)를 기반으로 전기적 성질이 매우 뛰어난 그래핀을 결합시켜 터치 스크린과 같은 투명 전도성 필름을 제조할 수 있는 가능성을 확인하고자 한다. 그래핀을 BC와 결합하기 위해서 라디오파의 인가강도와 처리시간을 달리하여 상온에서 산소 플라즈마 처리를 통해 표면을 개질시켰다. 개질된 그래핀의 물에 대한 접촉각이 $130^{\circ}$에서 $12^{\circ}$로 매우 작아진 것으로 친수성이 향상되었다. 또한, XPS분석에서는 graphene 처리 전 산소함유량 2.99%에서 10.98%로 크게 증가하였다. 그래핀의 손상은 Raman 분석에서 $I_D/I_G$ 비로 정도를 알 수 있다. 처리 전 $I_D/I_G$ 비가 0.11로 손상 정도가 가장 낮았고, 처리 후 0.36~0.43으로 처리 전에 비해 그래핀의 구조적 결함이 증가하였다. 용해시킨 BC에 그래핀을 0~0.04 wt% 첨가하여 제조한 막의 XRD 분석에 의하면 BC막과 plasma 처리된 graphene이 함유된 결합막이 동일한 $2{\theta}$로서 화학적으로 잘 결합되었음을 확인하였다. 이는 SEM 이미지에서 BC와 그래핀의 결합 상태를 확인한 것과 일치하였다. FT-IR 분석에서 플라즈마 처리한 그래핀이 함유된 결합막의 1,000~1,300 $cm^{-1}$ (C=O)에서의 피크가 커진 것으로 보아 plasma 처리된 graphene에서 산소기가 생성되었음을 알 수 있었다. 이와 같은 결과로부터 BC의 물리적인 강점을 기반으로 하여 그래핀을 결합시킨다면 신규의 투명 전도성 소재를 개발할 수 있으리라 사료된다.