• Journal of Auto-vehicle Safety Association
• /
• v.7 no.4
• /
• pp.16-19
• /
• 2015

FMVSS226 Ejection Mitigation Impact Test is usually performed by real vehicle. But it is necessary to perform the test using by Reinforced B.I.W. with considering vehicle developing timing and roof rail airbag (RRAB) supplier capacity. We sometimes need tendency (quick data) instead of slow accurate data to fix RRAB design as proper timing. Test with Reinforced B.I.W. is helpful saving time and cost. But it should be confirmed how much different between vehicle conditioned test result and Reinforced B.I.W. conditioned test result. There are some points to be improved even in the test with vehicle. Understanding of deviation of Reinforced B.I.W. conditioned test result from vehicle conditioned test result is needed to get benefits with using Reinforced B.I.W. conditioned in the test.

• The Korean Journal of Ecology
• /
• v.19 no.6
• /
• pp.563-573
• /
• 1996

Macroinvertebrate contribution to the leaf litter breakdown of Carpinus cordata was estimated at headwater streams at Mt. Jumbong (38°03'N, 128°25'E) during spring and winter spring by using two types of litter bag. Coarse-mesh bags with 10 g of leaf letter were placed in a 1st-order stream in April (the spring experiment) and December 1995 (the winter-spring experiment). Fine-mesh bags with 5 g of leaf letter were placed in a nearby 3ed-order steam. The breakdown of Carpinus in coarse-mesh bags was rapid, and, in terms of season, leaf litter processed rapidly during spring. daily mass loss rates of leaf litter (-k±1 SE) were highest for coarse-mesh bags in the spring experiment (-0.0429±0.0048), followed by coarse-mesh bags in the winter-spring (-0.0146±0.0014), fine-mesh bags in the spring (-0.0078±0.0004), fine-mesh bags in the winter-spring experiment (-0.0054±0.0005). Macroinvertebrate contribution to the litter breakdown was estimated by the difference of % leaf letter remaining between coarse -mesh bage and fine-mesh bags. Although shredders were more abundant during the winter-spring, their contribution was greater during the spring (50%) than the winter-spring (22∼33%). This result appeared to be due to the change in the chemical composition of leaf letter during processing, and to the seasonal growth patterns of major shredder taxa.

• Journal of muscle and joint health
• /
• v.21 no.3
• /
• pp.165-172
• /
• 2014

Purpose: The purpose of this study was to identify effects of postural habits and stress on low back pain experienced by nursing students. Methods: The survey was conducted with 282 students at 5 nursing schools in Seoul, Incheon, Chungcheongbuk, and Jeollabuk Province. Data were collected from October, 2013 to January, 2014. Data analyses including descriptive analysis, ANOVA, Pearson's correlation coefficient, Spearman's rank correlation coefficients, and multiple regression were performed using SPSS 21.0. Results: In multiple regression, habit of standing on force of one feet (${\beta}=.23$, p<.001), habit of sleeping on one's back (${\beta}=-.19$, p=.020), habit of resting the chin on one's hands (${\beta}=.15$, p=.029), and habit of carrying a bag on one shoulder (${\beta}=.12$, p=.011) were associated with low back pain experienced by nursing students. These factors accounted for 12.9% of the variance in the low back pain in undergraduate students. Conclusion: These results suggest that low back pain in nursing students are related to their habits of posture in daily life. Therefore, intervention program to encourage healthy postural habits can be effective to prevent low back pain in nursing students.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.106-106
• /
• 2002

This study investigated variations of micro-structures and mechanical properties of Ti / STS321L joint with various bonding temperature and time using brazing method. According to increasing bonding temperature and time, it was observed that the thickness of their reaction layer increased due So increasing diffusion rate and time. From the EPMA results, Ti diffused to the STS321L substrate according to increasing bending time to 30min. Hardness of bonded interface increased with increasing bonding temperature and time due to increasing their oxides and intermetallic compounds. XRD data indicated that Ag, Ag-Ti intermetallic compounds, TiAg and Ti₃Ag and titanium oxide, TiO₂were formed in interface. In tensile test, it was found that the tensile strength had a maximum value at the bonding temperature of 900℃ and time of 5min, and tensile strength decreased over bonding time of 5min. The critical thickness of intermetallic compounds was observed to about 30㎛, because of brittleness from their excessive intermetallic compounds and titanium oxide, and weakness from void.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.1
• /
• pp.19-27
• /
• 2016

The skin barrier is an important part of an ostomy product, holding the ostomy bag in place and protecting the peristomal skin. Skin barriers help protecting the peristomal skin from excrements and secretion, thus keeping the skin physiology intact by absorbing or permeating sweat. The vocabulary for the skin barrier has been standardized by ISO 24214, but there is no standard related to the skin barrier in Korea. We investigated the academic and commercial documents related to the skin barrier, and conducted a survey for appropriate korean vocabulary for standard. We propose Korean standard vocabulary for skin barrier terms defined in ISO 24214:2006.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.830-837
• /
• 2002

This study investigated variations of micro-structures and mechanical properties of Ti / STS321L joint with various bonding temperature and time using brazing method. According to increasing bonding temperature and time, it was observed that the thickness of their reaction layer increased due So increasing diffusion rate and time. From the EPMA results, Ti diffused to the STS321L substrate according to increasing bending time to 30min. Hardness of bonded interface increased with increasing bonding temperature and time due to increasing their oxides and intermetallic compounds. XRD data indicated that Ag, Ag-Ti intermetallic compounds, TiAg and $Ti_3Ag$ and titanium oxide, $TiO_2$ were formed in interface. In tensile test, it was found that the tensile strength had a maximum value at the bonding temperature of $900^{\circ}C$ and time of 5min, and tensile strength decreased over bonding time of 5min. The critical thickness of intermetallic compounds was observed to about $30\mu\textrm{m}$, because of brittleness from their excessive intermetallic compounds and titanium oxide, and weakness from void.

• Journal of Digital Contents Society
• /
• v.19 no.1
• /
• pp.133-140
• /
• 2018

Accurate sentiment classification is an important research topic in sentiment analysis. This study suggests an efficient classification method of Korean sentiment using word2vec and ensemble methods which have been recently studied variously. For the 200,000 Korean movie review texts, we generate a POS-based BOW feature and a feature using word2vec, and integrated features of two feature representation. We used a single classifier of Logistic Regression, Decision Tree, Naive Bayes, and Support Vector Machine and an ensemble classifier of Adaptive Boost, Bagging, Gradient Boosting, and Random Forest for sentiment classification. As a result of this study, the integrated feature representation composed of BOW feature including adjective and adverb and word2vec feature showed the highest sentiment classification accuracy. Empirical results show that SVM, a single classifier, has the highest performance but ensemble classifiers show similar or slightly lower performance than the single classifier.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.323-327
• /
• 2012

The effects of ultrasound and ascorbic acid cotreatment on the browning inhibition and microbial growth of fresh-cut Tsugaru apples were investigated. The prepared samples were dipped in distilled water (Cont) or 1% (w/v) ascorbic acid solution (AA) and were then ultrasonicated in distilled water (US) or 1% (w/v) ascorbic acid solution (AA+US). The samples were then packed in a 0.04mm polypropylene bag ($20{\times}15$ cm) and were stored at $10^{\circ}C$ for eight days. The AA+US treated samples showed high $L^*$ and low $a^*$, $b^*$ values as well as inactivated PPO activity. The growth of the total aerobic bacteria also inhibited the AA+US treated samples more. The physicochemical properties were not different among all the samples. It was demonstrated in this paper that the ultrasonication treatment with ascorbic acid prevented the enzymatic browning of and microbial growth in fresh-cut Tsugaru apples.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.3
• /
• pp.1-9
• /
• 2016

The objective of this study was to exam early stages of plant growth of Euonymus fortunei 'Emerald and Gold' and Hedera japonica grown in fabric felt bag attached on vertical greenery system with the ratio of hydrophilic polymer to substrate, 0(referred as Control), 0.1, 0.2, or 0.4% (v/v), in order to effectively utilize rainfall for low maintenance. After rainfall, the increase in volumetric water content of substrate amended with the hydrophilic polymer was between 13% and 87%, compared to that in Control. During drought period, higher ratio of hydrophilic polymer to substrate slowly decreased the volumetric water content, and increased plant height, leaf length, leaf width, number of leaves, branch number, and stem diameter of both Euonymus fortunei 'Emerald and Gold' and Hedera japonica with the highest fresh and dry weights of shoots or roots under the 0.1% ratio of hydrophilic polymer.

• The Korean Journal of Emergency Medical Services
• /
• v.19 no.2
• /
• pp.7-17
• /
• 2015

Purpose: This study aimed to compare the effects of rescue ventilation maneuvers on the quality of two-rescuer cardiopulmonary resuscitation (CPR). Methods: We implemented mouth to mouth (MMV), mouth to pocket mask (MPV) and bag-valve mask ventilation (BMV) maneuvers. Each team of two-nurses was randomized to perform three consecutive sessions of two-rescuer CPR by using three artificial ventilation maneuvers. Results: The subjects were 26 teams of nurses (female: 96.2%, male: 3.8%, age: 26.6 years). Failed ventilation was more frequent in BMV ($2.23{\pm}2.21$, p <.001) than MMV ($0.31{\pm}0.74$) and MPV ($0.38{\pm}0.64$). BMV had more compressions per minute ($93.7{\pm}5.7$) than MMV ($87.0{\pm}7.2$, p = .001) and shorter total compression pause time ($46.1{\pm}5.8sec$) and compression pause fraction ($23.3{\pm}2.2%$) than MMV ($54.8{\pm}10.3sec$, p = .001, $25.5{\pm}3.5%$, p = .001, respectively) and MPV ($53.1{\pm}7.1sec$, p =. 006 and $25.8{\pm}2.6%$, p = .006, respectively). Conclusion: In our simulation study, BMV reduced the compression pause time and increased the number of compressions per minute, thus indicating CPR provided to patients was effective. However, considering the high rate of ventilation failure, we recommend periodic training.