• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.270-277
• /
• 2010

The BAMS filter is a kind of wavelet shrinkage filter based on the Bayes estimators with no simulation, therefore it can be used for a real time filter. The denoising efficiency of BAMS filter is seriously affected by the estimated noise variance in each wavelet band. To remove noise in signals in existing BAMS filter, the noise variance is estimated by using the quartile of the finest level of details in the wavelet decomposition, and with this variance, the noise of the level is removed. In this paper, to remove the image noise includingodified quartile of the level of detail is proposed. And by these techniques, the image noises of mid and high frequency bands are removed, and the results showed that the increased PSNR of ab the midband noise, the noise variance estimation method using the monotonic transform and the mout 2[dB] and the effectiveness in denosing of low noise deviation images.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.146.2-146.2
• /
• 2014

KIST 6MV 가속기는 이온빔 분석 그리고 가속기 질량 분석법(Accelerator mass spectrometry)으로 활용된다. 이온빔 분석으로는 RBS, TOF ERD, PIXE. ${\mu}$-Probe을 할 수 있으며 AMS(Accelerator mass spectrometry)는 액체섬광측정법(LSC)과 비교할때 민감도는 1,000배 정도로 3H, 14C, 26Al,41Ca 을 10-21 ~ 10-18 mole/mg 까지 검출 가능하여. 응용분야로는 BAMS(Biological AMS), 전통과학, 지구과학, 환경과학에 활용되고 있다. 이중 AMS의 생-의학분야(BAMS)의 응용은 최근 매우 중요하게 연구되고 있다. BAMS의 활용 연구에 사용하는 핵종으로는 주로 3H, 14C, 41Ca, 36Cl를 사용하며, 14C 화합물은 쉽게 구할 수 있고, 자연방사선 이하의 낮은 14C labeled drug 사용하기 때문에 1948년 이후 생물학 연구에 혁신적으로 활용되고 있다. 주 활용분야로는 (1) 신약개발은 임상실험 전(Phase 0) 이용되며, 14C로 표지된 bio-molecule을 자연수준의 방사선 농도에서 추적자로 사용하여 질량을 측정하는 방법을 활용. (2) 의과학분야는 인체 내에서의 추적자 연구수행 (3) 항암제 연구는 암조직 중 약물농도와 암효과의 상관성을 연구 (4) 바이오 기술 분야에서는 생약 유효물질의 체내 대사연구 등을 할 수 있어 전세계적으로 활발히 연구가 진행되고 있다. KIST에서는 6MV가속기를 BAMS 연구에 활용하기 위하여 전처리 단계의 Combustion, Gas transfer, Reduction 등을 자체 제작하여 테스트 중에 있으며, BAMS 샘플의 Gas는 호기중의 성분, 대기 성분이 있으며, Liquid는 혈액(혈장,혈청,적혈구), Solid는 DNA, 세포, 장기 뼈, 피부, 식물조직, 사료, Drug 및 그 대사 류가 있다. AMS 측정 결과는 14C/12C 비율로 나타나며 그 결과를 농도로 환산하여 분석하게 된다. 또한 분석 데이터 신뢰를 확보하기 위하여 표준시료 및 품질관리용 시료를 사용하여 BAMS분석법에 대한 검증을 실시하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.2
• /
• pp.161-167
• /
• 2000

In this paper, we propose a design method for BAMs(bidirectiona1 associative memories) which can perform the function of bidirectional association efficiently. Based on the theoretical investigation about the properties of BAMs, we first formulate the problem of finding a BAM that can store the given pattern pairs as stable states with high error correction ratio in the form of a constrained optimization problem. Next, we transform the constrained optimization problem into a GEVP(genera1ized eigenvalue problem), which can be solved by recently developed interior point methods. The applicability of the proposed method is illustrated via design examples.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.452-454
• /
• 2012

현대 기술의 발전에 따라 다양한 항해 장비들이 개발되고 있으나, 인적 오류에 의한 해양사고는 지속적으로 발생하고 있다. 인적 오류에 의한 해양사고는 항해사의 상황 인지오류 또는 현상 착각 등 많은 상황에서 일어나고 있다. 선교에는 각종 항해 장비로부터 나오는 많은 물리적 음향 신호들이 존재하며, 위험을 전파하는 경보음은 항해사에게 위험상황을 정확하게 전달하지 못하고 있는 실정이다. 따라서 본 연구에서는 경보음을 항해사가 직관적으로 인지할 수 있는 선교경보관리시스템의 경보음 개발을 위한 연구를 실시하였다. 연구를 위해 기존에 선교에서 사용하는 경보음에 대해 음향학적 분석을 수행하였으며, 음성 경보음과 청각아이콘을 활용한 경보음 개발에 대한 실험적 연구를 수행하였다. 그리고 현재 해양연구원에서 제작한 선교경보관리시스템(BAMS)을 간략히 소개하고자 한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.1 s.22
• /
• pp.17-22
• /
• 2005

According to the development if the ships navigational equipment, a bridge system has been improved but a marine accidents by human error haven't been reduced Recently our interest is concentrated on a suitable ergonomic arrangement and design of the ships bridge equipment to reduce an error due to human factors. The bridge alarm system should be designed to recognize the alarm informations as soon as possible and to deliver it clearly. Internationally, the matter is being discussed on the BAMS(Bridge Alarm Management System) in a view if a ergonomic bridge design, but a practical design method is not getting result.. In this paper I would like to review an application approach of human engineering ergonomics to a bridge alarm system and propose a conceptual design if the Ergonomic Integrated Bridge Alarm Management System(EIBAMS)

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1246-1251
• /
• 2003

The fracture behaviors of Zr-based bulk amorphous metals(BAMs) having compositions of $Zr_{55}Al_{10}Ni_{5}Cu_{30}$, were investigated under impact loading and quasi-static conditions. For experiments, a newly devised instrumented impact testing apparatus and the subsize Charpy specimens were used. The influences of loading rate and the notch shape on the fracture behavior of the Zr-based BAM were examined. The Zr-based BAMs showed an elastic deformation behavior without any plastic deformation on it before fracture. Most fracture energies were absorbed in the process of the crack initiation. The maximum load and fracture absorbed energy under quasi-static condition were larger than those under impact condition. However, there existed relatively insignificant notch shape effect. Fracture surfaces under impact loading were smoother than those under quasi-static loading. The absorbed fracture energy appeared differently depending on the extent of the vein-like pattern region due to the shear bands developed at the notch tip. It can be found that the fracture energy of the Zr-Al-Ni-Cu alloy is closely related with the development of shear bands during fracture.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.1-6
• /
• 2005

According to the development of the ships navigational equipment, a bridge system has been improved but a marine accidents by human error haven't been reduced Recently It's concerned about a suitable ergonomic arrangement and design of the ships bridge equipment to reduce an error for human factors. The bridge alarm system should be designed to recognize the alarm informations as soon as possible, to deliver it clearly. Internationally, there have been a lively discussion on the BAMS(Bridge Alarm Management System) for a ergonomic bridge design, but the practical design method have not been published. In this article I would like to review a ergonomic conceptual design for the ships bridge alarm system and propose a conceptual design of the Ergonomic Integrated Bridge Alarm Management System(EIBAMS)

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.1 no.1
• /
• pp.81-86
• /
• 2001

In this paper, we investigated the modeling of Bank Asset Management System(BAME) based on intelligent agent. To achieve this goal, we introduced several kinds of agents that show intelligent features. BAMS is a user friendly system and adopts fuzzy converting system and fuzzy matching system that returns reasonable similarity matching results. Generation function of the proximity degree is suggested. Fuzzification of investment type categories and feature values are defined, and generation of proximity degree is also derived. An example of bank asset management system is introduced and simulated. Investment type matching utilizing fuzzy measure is tested and it showed quite reasonable similarity matching results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.5-7
• /
• 2012

선교에는 항해사에게 정보를 전달하기 위하여 다양한 신호가 존재한다. 항해 및 통신 장비로부터 나오는 음향 신호 등 다양한 청각 신호들이 존재하지만 이러한 청각 신호, 청각 경고음에 대한 인간의 인지능력에 관한 연구는 미흡한 실정이다. 청각 경고음은 크게 음성(speech), 함축적 소리(abstract sound), 청각 아이콘(auditory icon)으로 구분 할 수 있다. 본 연구에서는 청각 경고음 중 청각아이콘을 활용하여 5가지의 경보상황(엔진, 화재, 조타, 전기, 충돌)에서 청각아이콘에 대한 감성평가를 통해 각 상황에 적합한 청각아이콘을 선별하였다. 본 연구 결과는 선교 내 청각표시장치와 통합선교알람관리시스템을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• Communications for Statistical Applications and Methods
• /
• v.30 no.3
• /
• pp.311-330
• /
• 2023

The present work describes simulation studies to compare the performances in terms of averaged mean squared error of bayesian wavelet shrinkage methods in estimating component curves from aggregated functional data. Five bayesian methods available in the literature were considered to be compared in the studies: The shrinkage rule under logistic prior, shrinkage rule under beta prior, large posterior mode (LPM) method, amplitude-scale invariant Bayes estimator (ABE) and Bayesian adaptive multiresolution smoother (BAMS). The so called Donoho-Johnstone test functions, logit and SpaHet functions were considered as component functions and the scenarios were defined according to different values of sample size and signal to noise ratio in the datasets. It was observed that the signal to noise ratio of the data had impact on the performances of the methods. An application of the methodology and the results to the tecator dataset is also done.