• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.795-800
• /
• 2014

In this paper, a vibrotactile pad system, T-mobile, is developed to provide vibrotactile cues for hand-held devices. A grooved and slim design is adapted to the back-side plane of the T-mobile, and the contact part consists of 12 vibrotactile panels which can operate independently and separately. To be isolated among vibrotactile actuators, the surface of the cover is divided into several pieces. Each vibrating module consists of a linear resonant actuator, a section of covering surface, and a vibration isolator. In order to provide spatial and directional information, sensory saltation and phantom sensation are applied to the T-mobile. To evaluate the developed device, two experiments were conducted to test whether directional information and spatial information can be successfully displayed by the device. Additionally, in order to find optimal stimulation by sensory saltation, an empirical test was conducted. As a result, spatial and directional information would be useful for displaying intuitive information for hand-held devices with vibrotactile feedback and reasonable near-optimal value for sensory saltation was obtained.

• Journal of Korean society of Dental Hygiene
• /
• v.7 no.4
• /
• pp.455-470
• /
• 2007

The usage of appropriate disinfectants is essential for infection control in dental hospitals, dental clinics. Inadequate use of disinfectants is the cause of human or environmental toxicity and is a waste of cost. This study was aimed to assess the level of knowledge on the disinfection and chemical disinfectants among dental workers in dental hospitals, dental clinics. It's ultimately intended to serve as a basis for the preparation of more effective, appropriate educational programs on the disinfection and manuals on the use of disinfectants for dental workers. This study enforced a questionnaire with 184 dental workers employed in dental hospitals, dental clinics from 15 Aug. to 15 Sep. 2007, in the area of Daejeon. The obtained result were as follows; 1. The population sociological feature of dental hospital and dental clinic showed that significant differences of dental service career(pM0.039). Dental service career of dental workers shows; below 3 years 42.9%, 4~6 years 34.7%, more than 7 years 22.4% in dental hospitals, below 3 years 30.4%, 4~6 years 26.7%, more than 7 years 43.0% in dental clinics(pM0.039). 2. The average score of dental workers knowledge in 'Critical item soaks in high-level disinfectants for 20minutes was 2.73V0.49 point, got from knowledge of dental instrument is appropriate to immerse before sterilization in the dental device disinfection(pM0.002). 3. In the general disinfection which it follows in education experience of chemical disinfectants direction for use, 'Direction for use by Spaulding process classification' responded that the correct answer was the education experience dental workers 60.0%, the education non-experience dental workers 39.5%(p=0.026). 4. In the dental device disinfection which it follows in education experience of chemical disinfectants direction for use. 'High level disinfection is not applied for the non-critical items and equipment' responded that the education experience dental workers 49.2%, the education non-experience dental workers 31.9%(pM0.045), 'Semi-critical items is applied same method in presence of the infection disease which it acts responded that the education experience dental workers 44.6% answer back, the education non-experience dental workers 24.4%(pM0.017). 5. 'A hand disinfectants of anticeptics have effect' the education experience dental workers 78.5% answer back, the education non-experience dental workers 52.9%(pM0.003). 1t uses with hand disinfectants when the instruments which be imbrued and patient contact', the education experience dental workers 78.5% answer back, the education non-experience dental workers 62.2%(pM0.026), 'Boric acid solution uses for the skin disinfectants the education experience dental workers 52.3% answer back, the education non-experience dental workers is 37.0%(pM0.016), 'Gluconate have effective difference which it follows in chemical disinfectant consistency and the solution type' education experience dental workers 72.3% answer back, education non-experience dental workers 47.9%(pM0.004). 6. The education experience dental workers were appeared higher than the education non-experience dental workers in knowledge of the disinfection and chemical disinfectants. Consequently system and the specialty education which is standardized continuously must be provided to all dental workers.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.81-92
• /
• 2021

In this study, we investigated the effects of five EMS lumbar back pressure belts produced on an anatomical basis on lumbar spine stabilization. Five core muscles were selected, including the urinal, vertebral column, endotracheal, external abdominal, and large back muscles, and patterns were designed using a conductive fabric considering the appropriate muscle shape and pain-causing points. We experimented with four motions to examine the effects of different EMS abdominal compression belts on lumbar spine stabilization. Five healthy men in their 20s were selected. The selection conditions include no back pain history for the past three months, no restricted movements through pre-inspection, and the muscular strength of the body should belong to the normal grade. Using SLR, the sequence of experimental actions was chosen from the following but not limited to left-hand, body-hand, and back-line forces. Resting between movements lasted for 2 min, and the experiments were conducted after wearing the EMS abdominal pressure belt. Electrical stimulation was applied for 10 min to increase blood flow and muscle activation. The statistics of the experimental results were analyzed for specific differences by conducting the Wilcoxon and Friedman tests with nonparametric tests. The ranking results of each pattern were successfully assessed in the order of 5, 4, 3, 1, 2 for the five patterns, and we could identify slightly more significant results for experimental behavior associated with each muscle movement. Patterns produced based on anatomy showed differentiated effects when electric stimulation was applied to each muscle in different shapes, which could improve the stabilization of the lumbar spine in everyday life or training to the public. Based on these results, subsequent research would focus on developing smart healthcare clothing that is practical in daily life by employing different anatomical mechanisms, depending on the back pain, to utilize trunk-type tights.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.120-134
• /
• 2007

The usage of basic bodice blocks at men's apparel companies is investigated and the domestic and international men's upper bodice blocks are compared to find directions of research on development of bodice basic blocks. The following conclusions are found in this study. 1. The survey shows that basic bodice blocks are not used at men's apparel companies although all the respondents have good knowledge on bodice basic blocks. They responded that basic bodice blocks for representative body figures of each age category or of each country would help comparative studies on domestic and international basic bodice blocks and development of exporting apparel products. Also, they expected the utilization of men's basic bodice blocks both as education materials and in studies of design, of body figures, and of basic blocks for industry. 2. The comparative study on men's bodice blocks shows that waist circumference, hip circumference, neck circumference, height, and shoulder length, in addition to the minimal essential size items such as chest circumference and center back length, are used in most basic bodice blocks. The size formulae of each basic block are compared to find how the sizes are determined. For center back length, either measured back length or a certain proportion of height is used. For front and back interscyes, chest circumference is used in most basic bodice blocks. Either measured size, or a certain proportion of height or chest circumference is used for back height. The averaged ease allowances of basic bodice blocks are 3.2 cm for chest circumference, 10.8 cm for waist circumference, 1.2 cm for front interscye, 0.1 cm for back interscye, 0.2cm for shoulder length, and 0 cm for center back length. However, body blocks for different types of clothes have different ease allowances. Shirt basic blocks have ease allowances of 6.1 cm for chest circumference, 13.7 cm for waist circumference, 1.4 cm for front interscye, 0.6 cm for back interscye, 1.2 cm for shoulder length, and 1.8 cm for center back length. On the other hand, jacket basic blocks have ease allowances of 8.8 cm for chest circumference, 16 cm for waist circumference, 1.1 cm for front interscye, 1.4 cm for back interscye, 1.1 cm for shoulder length, and 0.8 cm for center back length.

• Archives of Plastic Surgery
• /
• v.46 no.4
• /
• pp.359-364
• /
• 2019

Background Few scales are currently available to evaluate changes in hand volume. We aimed to develop a hand grading scale for quantitative assessments of dorsal hand volume with additional consideration of changes in skin texture; to validate and prove the precision and reproducibility of the new scale; and to demonstrate the presence of clinically significant differences between grades on the scale. Methods Five experienced plastic surgeons developed the Hand Volume Rating Scale (HVRS) and rated 91 images. Another five plastic surgeons validated the scale using 50 randomly selected images. Intra- and inter-rater agreement was calculated using the weighted kappa statistic and intraclass correlation coefficients (ICCs). Paired images were also evaluated to verify whether the scale reflected clinical differences. Results The intra-rater agreement was 0.95 (95% confidence interval, 0.922-0.974). The interrater ICCs were excellent (first rating, 0.94; second rating, 0.94). Image pairs that differed by 1, 2, and 3 grades were considered to contain clinically relevant differences in 80%, 100%, and 100% of cases, respectively, while 84% of image pairs of the same grade were found not to show clinically relevant differences. This confirmed that the scale of the HVRS corresponded to clinically relevant distinctions. Conclusions The scale was proven to be precise, reproducible, and reflective of clinical differences.

• The Research Journal of the Costume Culture
• /
• v.16 no.5
• /
• pp.852-862
• /
• 2008

The purpose of this paper is to find how to do the width of skirt and the girth of the waist in the adequate pattern making for the obese women's skirt. Appearance test of the five experimental skirts was evaluated by the four experts in clothing construction. At the same time, 3D clothing air volume was observed for the five types of experimental skirt with different size specifications. The results from the appearance test were as follows; when the width of skirt pattern is set for(the shell girth/2), it was suggested w/4+1(front), w/4(back) for girth of the waist. On one hand, in case of (the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front)/2 and(waist girth of back)/2 for obese women's skirt with the best appearance. As results, it was found that the width of skirt pattern for the obese women should be the greatest shell girth instead of hip girth. In the case of the hip girth, the amount of ease on hip was suggested 6cm. It was found that pattern with the wrinkle of ease was full of the gaps between body and skirt in 3D clothing air volume. In spreading out to 2D flat pattern from 3D scan data, when the width of skirt pattern was set for(the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front/2)+(the waist girth of back/2) than the shell girth/2 in girth of the waist for the best appearance. And the conversion of 3D scan data into 2D flat pattern in curve shape of crosswise had to spread out of the plane in straight line. The obese women's clothing should be manufactured with systematical consideration of the diversity and scarcity of the obese women's body shape.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.5 no.2
• /
• pp.9-16
• /
• 2010

Objectives : This study is planned to classify different biomechanics of men and women, from the comparison of normal range and hip internal rotation angle in chronic low back pain patients. Methods : We measured the hip internal rotation angle of the 30 men and 30 women patients with low back pain that has been over 3 months in BuCheon Jaseng Hospital of Oriental medicine. We set 35-45 degrees as normal range, and found the patients with exceeding normal range, the patients with normal range, and the patients with under normal range. Results : Men appeared to have less hip internal rotation angle than women. Especially, the men's left hip internal rotation angle was less than normal range. On the other hand, women's right hip internal rotation angle was often larger than normal range which was stastically significant. Conclusions : Contraction of hip external rotation muscle including gluteus maxius muscle and piriformis muscle in men, or relaxation of posterior gluteus medius, gluteus maxius and piriformis muscle with contraction of tensor fasciae latae, a part of hip internal rotation muscle, in women seems to be the basis for biomechanics of chronic low back pain.

• Fashion & Textile Research Journal
• /
• v.8 no.1
• /
• pp.80-88
• /
• 2006

This study attempted to undertake comparative analysis of woman's jacket pattern and details based on the Crinoline and Bustle style of the 19th century, comprehend the relation and differences between the two styles. And it also presented the resultant characteristics and attempted reproducing the original dress of the past for the development of modern woman's jacket design. Larger portion was occupied for the breast front width than the back width for both Crinoline and Bustle style, which indicated the remarkable difference between these styles and modern jackets in terms of pattern size. Circumferences also showed that both styles had larger size for the front region than for the back. Divided by two types of pattern shape. The Crinoline style has a waist line and flare. On the other hand, the Bustle style does not have a waist line and has pleats. These two styles shows distinct differences of patterns even if they seem similar. It was essential to undertake the designing of models by giving a consideration to the characteristics of patterns of the two styles. With respect to how to sketch the study models which will be applied for the reproduction to modern body sizes were as follows: the front bust circumference; B/4 +1+1 cm, the back bust circumference; B/4 +1-1 cm, front waist circumference; W/4 +1+1 cm, back waist circumference; W/4 +1-1 cm, the height of sleeve crown; AH/3, armhole line; B/4, the back width /2; 17.5 cm, the breast front width /2; 16.5cm. And for the rest parts, sizes reflecting the characteristics of the patterns of two styles have been applied.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.723-725
• /
• 1998

STI CMP process are substituting gradually for LOCOS(Local Oxidation of Silicon) process to be available below sub-0.5um technology and to get planarized. The other hand, STI CMP process(especially STI CMP with RIE etch back process) has some kinds of defect like Nitride residue, Torn Oxide defect, etc. In this paper, we studied how to reduce Torn Oxide defects after STI CMP with RIE etch back process. Although Torn Oxide defects which occur on Oxide on Trench area is not deep and not sever, Torn oxide defects on Moat area is sometimes very deep and makes the yield loss. We did test on pattern wafers witch go through Trench process, APCVD process, and RIE etch back process by using an REC 472 polisher, IC1000/SUV A4 PAD and KOH base slurry to reduce the number of torn defects and to study what is the root causes of torn oxide defects.

• Journal of Korean Biological Nursing Science
• /
• v.19 no.1
• /
• pp.11-17
• /
• 2017

Purpose: To determine the effects of neck and back touch on Ultrasonic Vocalization (UV) and the Rat Grimace Scale (RGS) in rats touched by the human hand as an intervention for reducing pain and anxiety associated with intramuscular injections. Methods: This study was a randomized, controlled, pre-test/post-test design study. Twenty male Sprague-Dawley rats were assigned to either the experimental or control groups (n= 10 rats/group). The experimental group was touched in a manner similar to massaging the rat's neck and back twice a day for one week. The two groups received two intramuscular injections. The 22kHz and 50kHz UV and the RGS scores were measured before and after each intramuscular injection. Results: The 22kHz UV and RGS score were significantly higher in the control group than in the experimental group when the first intramuscular injection was administered; whereas, no difference between the experimental and the control groups were observed when the second intramuscular injection was administered. There was no statistical difference in the 50kHz UV between the two groups when the first and second injections were administered. Conclusion: This study found that touching was an effective intervention method to reduce negative emotions and pain in rats receiving their first intramuscular injection.