• 수산해양기술연구
• /
• 제41권3호
• /
• pp.188-198
• /
• 2005

This study was conducted to survey the catches of vertical bottom longline fisheries in the sea mount of central northern Pacific($30^{\circ}-42^{\circ}N$, $170^{\circ}-175^{\circ}E$), during the period of July 1 to August 25,2004 by commercial fishing vessel. The number of 57 test fishing was carried out in the central northern Pacific during 43 days and the total catches were 21,092.4kg as 19 fish species, CPUE/day and catches/day were 185 baskets and 490.5kg, respectively. Main fish species caught from the experimental fishing were Squalus mitsukurii (66.3%), Coelorhyrchus asperocephaius (11.7%) and Helicolenus avius (9.8%) and, average inside diameter for fish mouth was 4.0cm over. Catch ratio according to each fishing ground was the order of F, D, J, B and C. Catch ratio fur water depth was the order of 450-500m, 350-400m, 300-350m, 400-450m, 1000-1100m and 500-550m and, main species by water depth was Squalus mitsukurii for 300-400m, Etmopterus lucifer for 300-550m, Coelorhyrchus asperocephaius far 1,000m over. Catch ratio according to the kind of hooks was higher at the hook no.6 for Squalus mitsukurii and no. 5 for Etmopterus lucifer and, catch ratio by baits was higher at squid for Squalus mitsukurii, saury and eel for Helicolemus avius and saury for Etmopterus lucifer. Accordingly, it is thought that the extension of fishing hours is needed with the reduction of damage and loss for fishing gears during fishing operation.

• 디지털콘텐츠학회 논문지
• /
• 제16권2호
• /
• pp.227-234
• /
• 2015

최근 UHDTV와 같은 고품질, 고화질을 기본으로 현장감을 제공하는 방송 디스플레이 환경이 요구됨에 따라 다양한 4K 카메라들이 출시되고 있다. 일반적으로 사용되고 있는 Super 35mm 센서의 4K/UHD 카메라는 광고, 드라마, 자연다큐멘터리, 교양 등 싱글 카메라 제작 시스템에는 활용도가 높다. 하지만 예능, 스포츠, 콘서트 등 멀티카메라 제작시스템에서는 거리에 따라 클로즈 업(close-up)이나 타이트 샷(tight shot)의 한계점을 가짐에 따라 방송 중계에 제약이 따른다. 또한 4K 렌즈는 기존의 HD 렌즈 군에 비해 부족한 실정이라 HD 제작 시 구현되었던 카메라 촬영 샷에 제한이 따른다. 따라서 이를 보완하기 위한 2/3inch 센서 4K/UHD 카메라의 활용이 요구되고 있으며, 다양한 렌즈군의 활용으로 UHD 영상 콘텐츠 제작이 요구되고 있다. 본 연구는 Grass Valley 사의 LDX 4K/UHD카메라를 사용하여 2/3" 센서에서의 HD급 렌즈 활용에서의 화질 테스트를 통해 활용 가능성에 대해 분석하고, 이를 효율적인 활용 가능성을 제시하였다.

• Applied Microscopy
• /
• 제10권1_2호
• /
• pp.7-17
• /
• 1980

Electron microscope radioautography introduced by Liquier-Milward (1956) is now used routinely in many laboratories. Most of the technical difficulties in specimen preparation have been overcome. This method is modified from loop method for improvement of EM radioautographic techniques. The advantages of this method are: 1. the use of single specimens on small corks and of a large wire loop, allows the experimenter to avoid the blemishes in the membrane; 2. the surfactant dioctyl sodium sulphosuccinate is added to diluted ILford L4, thus greatly prolonging the period of time over which good emulsion layers can be made; 3. corks can be handled in perspex holder which allows about 20 specimens to be developed simultaneously. The steps of the method comprise: 1. Cut ribbons of ultrathin sections of silver interference colour 2. Pick them up on formvar-coated 200 mesh grids 3. Prestaining of tissues 4. Coat the specimens with a thin layer of carbon by evaporation (30-60A) 5. Mount the specimens on corks (about 1cm apical diameter) using double-sided scotch tape 6. Emulsion coating; a. Take a 250m1 beaker, place it on the pan of a sliding weight balance and weigh it. Add 10 grams extra to the beam. Add pieces of ILford L4 emulsion to the beaker until the balance is swinging freely. Add the 20ml of distilled water that was previously measured out. b. Surfactant dioctyl sodium sulphosuccinate is added to diluted ILford L4. 7. Prepare a series of membranes of gelled emulsion with the wire loop and apply one to each cork-borne specimen. 8. Put the specimens away to expose by pushing the corks into short length of PVC tubing, each tube having a small hole in the side 9. Place the tubes in small boxes together with silica gel. 10. Exposure 11. Developer - Kodak Microdol X for 3 minutes 12. Fixer - A perspex holder can be manufactured which allows 20 specimens to be developed simultaneously. 12. Fixer - 30% sodium thiosulfate for 10 minutes 13. Examination with Siemens Elmiskop 1A electron microscope

• 한국해양환경ㆍ에너지학회지
• /
• 제5권3호
• /
• pp.45-53
• /
• 2002

본 조사는 장마나 홍수로 인하여 강에서 해양으로 유입되는 부유폐기물의 성상을 파악하여, 해양폐기물 저감대책을 마련하기 위한 자료로 활용하기 위해 한국의 4대강인 한강, 낙동강, 금강, 영산강을 대상으로 2002년 7원과 8원 두 달간 수행하였다. 부유폐기물의 유입은 강우의 정토에 따라 차이가 있으나, 일일 강수량 150mm 이하의 일시적인 호우경보 시에도 부유폐기물의 유임은 미미하였으며, 지속적이며 다량의 강우량이 발생하거나 국지성 호우에 의하여 홍수가 발생될 때 대부분의 부유폐기물이 유입됨을 알 수 있었다 따라서 강에서 유입되는 부유폐기물은 지속적으로 해양에 유입되는 것이 아니라, 일시에 특히 홍수시 다량으로 며칠에 걸쳐서 유입된다. 또한 발생된 부유폐기물 모두가 해양으로 유입되지 않고 폐기물의 상당량이 강변에 집적되는 것을 확인하였다. 각 강의 특성에 따라 부유물의 구성비는 달랐지만 부유물들의 전반이상은 식물 쓰레기이다. 그러므로 해양에 유입되는 부유폐기물 수거 방안마련을 위해서는 식물쓰레기에 의한 영향을 고려해야 한다.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.743-752
• /
• 2007

Statement of problem. The aims of the study were to evaluate the effect of current surface conditioning methods on the bond strength of a resin composite luting cement bonded to ceramic surfaces and to identify the optimum cement type. Material and methods. The sixty zirconia ceramic specimens(10 per group) with EVEREST milling machine and 60 tooth block were made. The zirconia ceramic surface was divided into two groups according to surface treatment: (1) airborne abrasion with $110{\mu}m$ aluminum oxide particles; (2) Rocatec system, tribochemical silica coating. The zirconia ceramic specimens were cemented to tooth block using resin cements. The tested resin cements were Rely X ARC, Panavia F and Superbond C&B. Each specimen was mount in a jig of the universal testing machine for shear strength. The results were subjected to 2-way ANOVA and Post hoc tests was performed using Tukey, Scheffe, and Bonferroni test. Results. The mean value of shear bond strength(MPa) were as follows: $$RelyXARC(+Al_2O_3),5.35{\pm}1.69$$; $$RelyXARC(+Rocatec),8.50{\pm}2.13$$; $$PanaviaF(+Al_2O_3),9.58{\pm}1.13$$; $$PanaviaF(+Rocatec),12.98{\pm}1.71$$; $$SuperbondC&B(+Al_2O_3)8.27{\pm}2.04$$; $$SuperbondC&B(+Rocatec),14.46{\pm}2.39$$. There was a significant increase in the shear bond strength when the ceramic surface was subjected to the tribochemical treatment(Rocatec 3M) in all cement groups(P<0.05). Bonding strengths of cements applied to samples treated with $Al_2O_3$ were compared; Rely X ARC showed the lowest values, whereas Panavia F cement showed higher value than that of Superbond C&B group with no statistical significance. When the bond strength of cements with of Rocatec treatment was compared, Rely X ARC showed lowest values. Overall, it was apparent that tribochemical treated Super-Bond possessed higher mean bond strength (14.46MPa; P<0.05) than that of Panavia F cement group with no significance. Conclusions. Silica coating followed silanization(Rocatec treatment) increase the bond strength between resin cement and zirconia ceramic. Panavia F containing phosphate monomer and Superbond C&B comprised of 4-META tend to bond chemically with zirconia ceramic, thus demonstrating higher bond strength compared to BisGMA resin cement. Superbond C&B has shown to have highest value of bonding strength to zirconia ceramic after Rocatec treatment compared to other cement.

• 대한방사선기술학회지:방사선기술과학
• /
• 제4권1호
• /
• pp.55-62
• /
• 1981

This study was conducted, during the period of 20-30th, July in 1981, to survey measurement methods in thyroid uptake rate test in Seoul city. The results were summarized as follows: 1. For the great part of nuclear medcine department, a mount of radioiodine($^{131}I$) administrated to the patients was $50-100{\mu}Ci$ in thyroid uptake rate test. 2. Distribution of scintillation, counter with crystal size of $1\frac{1}{2}inch$ was 43%, 3inch(22%), 2.5inch(14%) and $2\frac{1}{2}inch$ was 7% in RAI uptake rate test. 3. When RAI uptake rate test was performed, distribution of collimator in use was flat field type collimator(78%) in general and cylindrical type collimator was 22%. 4. High voltage applied to the P-M tube was $900{\sim}1000V$(50%) and most units provided $3{\sim}15%$ of the window range for the $^{131}I$ peak $\gamma-ray$ energy. 5. Distribution on the use of neck phantom for measurements standard solution was 57% and distribution of b filter in use for room background counts and extrathyroidal tissue was 43% and 50%. 6. The distance between the counter and the source was 25cm(58%) in measuring radioactivity of standard solution, thyroid tissue and background radioactivity count. 7. The early uptake measurements(2, 4, 6 hours) are done after administration of the radioiodine dose and also 24-hour and 48-hour uptake measurements are done in routine test.

• 한국통신학회논문지
• /
• 제36권1B호
• /
• pp.80-85
• /
• 2011

현재 광대역 통합망의 사용으로 인해 확장된 망을 사용하는 트래픽의 양이 많아지고, 어플리케이션의 발달로 인해 트래픽의 종류도 증가하고 있다. 특히 IPTV, VOD, 온라인 게임 등의 멀티미디어 속성을 가진 트래픽의 증가가 두드러지고 있다. 이러한 멀티미디어 트래픽은 페이로드의 크기가 클 뿐만 아니라 실시간 처리를 요하기 때문에 라우터에서 트래픽 속성에 따라 차등한 대역폭을 지원하는 연구가 진행 중에 있다. 트래픽의 속성을 정확히 구분하기 위해선 어플리케이션 계층을 분석하여야 하는데, 기존의 네트워크 프로세서 구조에선 L2-4 처리와 L7처리를 순차적으로 처리하고 있다. 본 논문에서는 L2-4와 L7을 병렬로 처리하기 위해 글로벌 캐시를 둔 새로운 병렬 네트워크 프로세서 구조를 제안한다. 제안하는 구조를 검증하기 위해 기존의 네트워크 시스템과 제안한 구조의 네트워크 시스템을 SystemC로 모델링하였으며, L2-4, L7 처리 시간을 측정하기 위해 EEMBC-와 SNORT를 이용하여 동일한 시스템에서 시뮬레이션 하였다. 멀티미디어 속성의 동일한 트래픽이 연속적으로 입력될 경우 제안한 구조에서 약 85%의 성능 향상을 보였다.

• 천문학논총
• /
• 제22권4호
• /
• pp.211-217
• /
• 2007

We have been making dual dome enclosures which are useful to track artificial space objects at SSNT (Space Science and Technology Lab.) Kyung Hee University. We verified the safety of the dome enclosures using basic design and structure analyses before manufacturing them, and then performed an optimization analysis for economic and safe systems. The dome enclosure has a fully-open type structure to smoothly operate a telescope made in the style of altazimuth mount with very fast tracking. It is also designed to be safe against extreme weather conditions. The general structure of the observatory system consists of the dual dome enclosures at the top of a container. For the structural analyses, we consider the following two methods: (1) gravitational sustain analysis - how the structure supporting the dome withstand the weight of the dome, and (2) wind load analysis that considers the effect of the wind velocity at the region where the observatory is located. The result of overall deformation is found to be less than 0.551mm and the result of equivalent stress is found to be 20.293Mpa, indicating that the dual dome system is reasonably designed. This means structurally to be safe.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.62-62
• /
• 2008

As micro-system move toward higher speed and miniaturization, requirements for embedding the passive components into printed circuit boards (PCBs) grow consistently. They should be fabricated in smaller size with maintaining and even improving the overall performance. Miniaturization potential steps from the replacement of surface-mount components and the subsequent reduction of the required wiring-board real estate. Among the embedded passive components, capacitors are most widely studied because they are the major components in terms of size and number. Embedding of passive components such as capacitors into polymer-based PCB is becoming an important strategy for electronics miniaturization, device reliability, and manufacturing cost reduction Now days, the dielectric films deposited directly on the polymer substrate are also studied widely. The processing temperature below $200^{\circ}C$ is required for polymer substrates. For a low temperature deposition, bismuth-based pyrochlore materials are known as promising candidate for capacitor $B_2Mg_{2/3}Nb_{4/3}O_7$ ($B_2MN$) multi layers were deposited on Pt/$TiO_2/SiO_2$/Si substrates by radio frequency magnetron sputtering system at room temperature. The physical and structural properties of them are investigated by SEM, AFM, TEM, XPS. The dielectric properties of MIM structured capacitors were evaluated by impedance analyzer (Agilent HP4194A). The leakage current characteristics of MIM structured capacitor were measured by semiconductor parameter analysis (Agilent HP4145B). 200 nm-thick $B_2MN$ muti layer were deposited at room temperature had capacitance density about $1{\mu}F/cm^2$ at 100kHz, dissipation factor of < 1% and dielectric constant of > 100 at 100kHz.

• 한국수정란이식학회지
• /
• 제1권1호
• /
• pp.35-49
• /
• 1986

Recipients are an integral part of embryo transfer and they are expensive to maintain as a good recipient. Recipient management is one of the most important components in a successful embryo transfer program. Management includes selection and subsequent care of the animals. A good recipient is basically on "open" cows or heffers whose reproductive tract is capable of receiving one or two embryos and incubating it to term. Potential recipients should be always be healthy and cycling normally ranging from 18 to 23 days. A thorough veterinary examination is recommended for candidate of recipients and cattle for questionable health should be eliminated from the recipient herd. Age and size of recipients are particularly important considerations when heifers are used, because of most embryos available for transfer are from large dams and sires. Body condition can influence a recipient's production, reproduction and health. Obese and underconditioned cattle should be avoided for use. Transfer of fresh embryos especially requires precise synchronization of donors and recipients. For estrus synchronization, PGF$_2$$\alpha$ is injected twice 10 to 12 days apart and short4erm progestagen treatment is applied to potential recipient cattle by coil into vagina (PRID) or ear implant (Synchro-Mate-B). The highest pregnancy results are achieved in recipients at exact synchrony with donors or 12 to 24 hr earlier than donors. Estrus detection is a major factor in breeding efficiency. High accuracy can be achieved by use of heat mount detection alds or by obserbing cattle for 30-minute peroids 3 times daily. Assay progesterone in milk can be used to discrIminate between pregnant and nonprenant recipients. Rectal palpation on day 35 to 70 after is an accurate and safe method of pregnancy diagnosis. Embryonic mortality in recipients may be associated with factors such as high environmental temperature and nutritional or lactational stress in early lactation period. Achievement of short calving interval requires concentrated management activity during the first 90 days following calving. Acceptable candidate for a recipient should be routinely vaccinated for infectious diseases. Proper nutritional programs according to NRC requirements and body condition scoring system for recipient cattles are vital to the ultimate success of an embryo transfer program.r program.