• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.93-98
• /
• 2017

The feasibility of incorporating cabbage powder (CP) as a value-added food ingredient into convenient food products was investigated using cookie as a model system. CP was incorporated into cookies at amounts of 0, 2, 4, 6, and 8% (w/w) based on total weight of wheat flour. pH level and moisture content of cookie dough decreased and increased significantly, respectively, with increasing levels of CP (p<0.05), whereas density was not directly affected by levels of CP incorporation. The spread ratio of cookies and their hardness increased significantly while the loss rate decreased significantly with increasing levels of CP (p<0.05). In terms of color, lightness and yellowness decreased while redness increased significantly (p<0.05) with increasing levels of CP. 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulphonic acid) (ABTS) radical scavenging activities were significantly elevated by CP addition, and they increased significantly as CP concentration increased in the formulation (p<0.05). Finally, consumer acceptance test indicated that the higher than 4% of CP incorporation had an adverse effect on general consumer preferences. In contrast, cookies with moderate levels of CP (2%) were recommended based on overall scores to take advantage of the antioxidant properties of CP without sacrificing consumer acceptability.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.107-107
• /
• 2017

Sweet corns are enjoyed worldwide as processed products and fresh ears. Types of sweet corn are based on the gene(s) involved. The oldest sweet corn type has a gene called "sugary (su)". Sugary-based sweet corn was typically named "sweet corn". With its relatively short shelf life and the discovery of a complementary gene, "sugary enhanced (se)", the sweet corn (su only) was rapidly replaced with another type of sweet corns, sugary enhanced sweet corn, which has recessive homozygous su/su, se/se genotype. With the incorporation of se/se genotype into existing su/su genotype, sugary enhanced sweet corn has better shelf life and increased sweetness while maintaining its creamy texture due to high level of water soluble polysaccharide, phytoglycogen. Super sweet corn as the name implies has higher level of sweetness and better shelf life than sugary enhanced sweet corn due to "shrunken2 (sh2)" gene although there's no creamy texture of su-based sweet corns. Distinction between sh2/sh2 and su/su genotypes in seeds is phenotypically possible. The Involvement of se/se genotype under su/su genotype, however, is visually impossible. The genotype sh2/sh2 is also phenotypically epistatic to su/su genotype when both genotypes are present in an individual, meaning the seed shape for double recessive sh2/sh2 su/su genotype is much the same as sh2/sh2 +/+ genotype. Hence, identifying the double and triple recessive homozygous genotypes from su, se and sh2 genes involves a testcross to single recessive genotype, chemical analysis or DNA-based marker development. For these reasons, sweetcorn breeders were hastened to put them together into one cultivar. This, however, appears to be no longer the case. Sweet corn companies began to sell their sweet corn hybrids with different combinations of abovementioned three genes under a few different trademarks or genetic codes, i.g. Sweet $Breed^{TM}$, Sweet $Gene^{TM}$, Synergistic corn, Augmented Supersweet corn. A total of 49 commercial sweet corn F1 hybrids with B73 as a check were genotyped using DNA-based markers. The genotype of field corn inbred B73 was +/+ +/+ +/+ for su, se and sh2 as expected. All twelve sugary enhanced sweet corn hybrids had the genotype of su/su se/se +/+. Of sixteen synergistic hybrids, thirteen cultivars had su/su se/se sh2/+ genotype while the genotype of two hybrids and the remaining one hybrid was su/su se/+ sh2/+, and su/su +/+ sh2/+, respectively. The synergistic hybrids all were recessive homozygous for su gene and heterozygous for sh2 gene. Among the fifteen augmented supersweet hybrids, only one hybrid was triple recessive homozygous (su/su se/se sh2/sh2). All the other hybrids had su/su se/+ sh2/sh2 for one hybrid, su/su +/+ sh2/sh2 for three hybrids, su/+ se/se sh2/sh2 for three hybrids, su/+ se/+ sh2/sh2 for four hybrids, and su/+ +/+ sh2/sh2 for three hybrids, respectively. What was believed to be a classic super sweet corn hybrids also had various genotypic combination. There were only two hybrids that turned out to be single recessive sh2 homozygous (+/+ +/+ sh2/sh2) while all the other five hybrids could be classified as one of augmented supersweet genotypes. Implication of the results for extension service and sweet corn breeding will be discussed.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.37-44
• /
• 2014

Recently, many efforts related to the utilization of industrial by-products have been made to reduce carbon dioxide emissions in the construction industry. Of these various efforts, concrete incorporating ground granulated blast furnace slag (BFS) provides many advantages compared to conventional concrete, such as high long-term compressive strength, improved durability and economic benefits because of its latent hydraulic property, and low compressive strength at early curing age. This paper investigates the compressive strength of high-activated ground granulated blast furnace slag blended mortar with slag by-product S type(SBP-S). The results of the experiment revealed that incorporating high-activated ground granulated blast furnace slag would affect the compressive strength of mortar. It was found that increasing the Blaine fineness and replacement ratio of slag by-product S type shows high compressive strength of mortar at early curing age because of its high $SiO_2$ and CaO contents in the slag. It is confirmed that an increase of curing age does not affect the compressive strength of mortar made with slag by-product S type at a high curing temperature. Moreover, it is possible to develop and design concrete manufactured with high-activated ground granulated blast furnace slag as binder considering the acceleration curing conditions and mix proportions.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.147-159
• /
• 1995

This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.77-93
• /
• 1999

This study is aiming at identifying the foreward and backward lingkage effects of the farm land base development project. Korean Government has continuously carried out farmland base development projets including the integrated agricultural development projects. large and medium scale irrigation projects and the comprehensive development of the four big river basin including tidal land reclamation and estuary dam construction for the all weather farming since 1962. the starting year of the five year economic development plans. Consequently the irrigation rate of paddy fields in Korea reached to 75% in 1998 and to escalate the irrigation rate, the Government had procured heavy investment fund from IBRD. IMF and OECF etc. To cope with the agricultural problems like trade liberalization in accordance with WTO policy, the government has tried to solve such problems as new farmland base development policy, preservation of the farmland and expansion of farmland to meet self-sufficiency of foods in the future. Especially, farmland base development projects have been challanged to environmental and ecological problems in evaluating economic benefits and costs where the value of non-market goods have not been included in those. Up to data, in evaluating benefits and costs of the projects, farmland base development projects have been confined to direct incremental value of farm products and it's related costs. Therefore the projects'efficiency as a decision making criteria has shown the low level of economic efficiencies. In estimating economic efficiencies including Leontiefs input-output analysis of the projects could not be founded in Korea at present. Accordingly this study is aimed at achieving and identifying the following objectives. (1) To identify the problems related to the financial supports of the Government in implementing the proposed projects. (2) To estimated backward and foreward linkage effects of the proposed project from the view point of national economy as a whole. To achieve the objectives, Hwangrak benefited area with reservoir which is located in Seosan-haemi Disticts, Chungnam Province were selected as a case study. The main results of the study are summarized as follows : a. The present value of investment and O & M cost were amounted to 3,510million won and the present value of the value added in related industries was estimated at 5.913million won for the period of economic life of 70 years. b. The total discounted value of farm products in the concerned industries derived by the project was estimated at 10,495million won and the foreward and backward linkage effects of the project were amounted to 6,760 and 5,126million won respectively. c. The total number of employment opportunities derived from the related industries for the period of project life were 3,136 man/year. d. Farmland base development projects were showed that the backward linkage effects estimated by index of the sensitivity dispersion were larger than the forward linkage effect estimated by index of the power of dispersion. On the other hand, the forward linkage effect of rice production value during project life was larger than the backward linkage effect e. The rate of creation of new job opportunity by means of implementing civil engineering works were shown high in itself rather than any other fields. and the linkage effects of production of the project investment were mainly derived from the metal and non-metal fields. f. According to the industrial linkage effect analysis, farmland base development projects were identified economically feasible from the view point of national economy as a whole even though the economic efficiencies of the project was outstandingly decreased owing to delaying construction period and increasing project costs.

• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.56-63
• /
• 2011

Durum wheat semolina was added into wet-milled rice flour in order to improve chewy texture, firm bite ("al dente"), and resistance to overcooking of the ordinary rice noodles. Wet noodles were prepared by mixing 0 (control), 5, 10, 15, and 20% (w/w) of semolina per semolina and rice flour mixtures. Vital gluten (4%, w/w) and salt (2%, w/w) were added to form the pliable strands of wet noodles and final moisture contents of the raw mixtures were equalized at 45%. Pasting properties of the suspended flour mixtures as measured by the Rapid Visco Analyser (RVA) showed slight increases (up to $1.2^{\circ}C)$ in pasting temperatures along with the considerable decreases in peak viscosities as semolina increased at over 15%. Reduced shear thinning and retrogradation of the starch solution that leads to hardening of the cooked noodles were indicated by lowered breakdown viscosities and gaps between finaland setback viscosities from the RVA viscogram as semolina increased at over 10%. Reduced water uptake and turbidity increases of the cooking water as caused by the soluble starches from the noodle were also noted as the content of semolina increased. More or less significant (p<0.05) decreases in colorimetric L (lightness) value of the raw- and cooked noodles were observed as semolina increased while a- (redness) and b (yellowness) values were rather increased at the same moment. Textural properties of the cooked noodles such as hardness, springiness, cohesiveness, gumminess, and chewiness from TPA tests were significantly (p<0.05) influenced by added semolina, even at 5%-levels or more. It can be concluded that addition of semolina into rice flour could provide easy handling of the wet noodles without distortion during transportation, integrity and firm bite of the cooked noodles, and less loss of starch to the cooking water in comparison with the ordinary rice noodle. It was finally suggested that optimum level of the semolina in the product was approximately 10% for the quality wet rice noodle products.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.6
• /
• pp.29-37
• /
• 2019

Purpose - This study intends to analyze Chinese consumers' purchase intention of Korean automobile. The aims of this study investigated to find out how product attributes and brand image affect the consumer's purchase intention of Korean automobiles in China. We consider the product attributes, brand image as evaluation criteria, also recognized as objectives for purchase intention. This study aims to analyze the positive effects on Chinese consumers' purchase intention with the variables by using the research model. Research design, data, and methodology - Based on theory of Purchase Intention, the concept of purchase intention was assessed by two factors: a) product attributes, and b) brand image to test the proposed hypotheses. The survey was conducted for 30 days, from October 17 to November 16 in 2018. With IBM SPSS Statistics 23.0 and IBM SPSS AMOS 23.0, factor analysis and regression, Cronbach's alpha and correlation were tested. 300 samples were used for this analysis. Results - As a main result, product attributes and brand image exerted significant effects on consumer's purchase intention. Thus,

and

were supported. The results showed that the product attributes, brand image had positive effects on purchase intention. The findings of this thesis are as follows: Firstly, automobiles' quality factors were divided into two categories like product properties (price, performance, design, economy, and safety), and brand image (awareness, favorability, reliability, and familiarity). Second, it showed that product properties and brand image had positive impacts on purchase intention of consumer. Conclusions - The impact of product attributes and brand image on consumer perceived value of Korean automobiles in China can be seen as a universal psychology of consumers who trust automobile products such as high quality, technology, ets. The results offer some insights into the extended model and have important managerial implications for Korean automobile enterprise. As the findings of this thesis show, all strategic orientations have significant and positive effects on the ability of innovation. At the same time, automobile company must pay attention to quality. As the relationship between the automobiles' performance and brand image were positive and significant, automobile companies should have comprehensive strategic orientations focused on strengthening these factors.

• Journal of Adhesion and Interface
• /
• v.2 no.3
• /
• pp.25-32
• /
• 2001

Ethyl cyanoacrylate (ECA) is used as an instant adhesive, and it can be readily polymerized by moisture in air without any initiator and applied for industrial products and ohome use. However, pure ECA monomer is low-viscosity liquid at room temperature that flows into substrate surface. To thicken the instant adhesive, poly(methyl methacylate)(PMMA) is often added in it commercially. Another disadvantage of instant adhesive polymer is its brittleness In this study, functional polymers including PMMA for an additive of ECA were prepared to increase viscosity of the monomer and flexibility of the adhesive atthe same time The additives, P(MMA-VAc-EVE), were synthesized by radical copolymerization of MMA with VAc and EVE having low glass transition temperature (Tg). The additives were added to ECA to get functional instant adhesives. The chemical structures of the additives and ECA polymers were confirmed by $^1H$ NMR and FTIR, and their physical and mechanical properites were also evaluated. The Tg of the obtained additives decreased with increasing the content of VAc or VAc-EVE, indicating more improved flexibility. In addition, functional instant adhesive containing the additives showed higher bonding strength than that of the existing one.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.963-974
• /
• 2005

This study was conducted to examine the growth performance, carcass characteristics, physico-chemical properties and fatty acid composition of muscle tissues of Hanwoo steers when they were fed diets containing four levels of E. ulmoides leaves. Steers were allotted to one of four dietary treatments, which were designed to progressively substitute Eucommia ulmoides for 0, 3, 5 and 10% of the rice straw in the basal diet. Seventy two Hanwoo steers (321±13kg) were used. Average daily gain (0.81-0.86kg) and feed conversion (10.05-10.59) were not changed by feeding E. ulmoides leaves. Emission of fecal ammonia gas was decreased by increasing substitution levels of E. ulmoides leaves. Emission of ammonia gas in feces of steers were significantly (p<0.05) decreased in the 5% and 10% treatments at 40℃ compared with in control (30.6ppm) and 3% treatment (29.8ppm), respectively 20.3 and 21.6ppm. Back fat thickness was higher (p<0.05) in steers fed control diet (15.0mm) than 5 and 10% E. ulmoides diets (10.2 and 10.5mm respectively). The grade ‘A’ appearances of meat yield of steers were increased up to 20% by the 3% substitution of E. ulmoides leaves, and the grades ‘1+’ and ‘1’ appearances of meat quality were significantly improved (p<0.05) by the 5 and 10% Eucommia ulmoides feeding. There was no statistical difference in meat color of loin and top round among all treatments. It appeared that the 5% and 10% E. ulmoides leaves feeding affected (p<0.05) a increase in oleic acid concentration in loin and top round muscles. The concentration of serum cholesterol was lower (p<0.05) in steers fed 10% E. ulmoides (53.3mg/100g) than that of the other treatments (55.7-57.0mg/100g). The diarrhea incidence was about 20.26% in control, while it was lower (p<0.05) in the 5 and 10% E. ulmoides leaves treatments (10.4-12.5%) than control. There was no statistical difference in the occurrences of respiratory disease among all treatments. It is concluded that E. ulmoides leaves should be a prospective feed additive because it contains various functional substances. It is likely that air-dried E. ulmoides leaves can reduce the back fat thickness of Hanwoo steers and the occurrences of diarrhea. Therefore, the 5 and 10% substitution of E. ulmoides for roughage are highly recommended to be used in practice.

• Journal of Food Hygiene and Safety
• /
• v.20 no.2
• /
• pp.98-102
• /
• 2005

As a part of basic investigation for utilizing cultured eel and by-products as a food source, a mineral contents and fatty acid composition of bone and flesh were investigated. Flesh of cultured eel was higher in moisture and crude protein content, and lower in crude ash and lipid content than those of the bone. Mineral of bone were measured 220.72 mg/100 g of Ca, 169.87 mg/100 g of P, 117.05 mg/100 g of Na,92.75 mg/100g of K, 6.18 mg/100g of Cu,5.02 mg/100 g of Zn,2.56 mg/100 g of Fe, and flesh were measured 120.23 mg/100g of CL 150.36 mg/100 g of P, 136.36 mg/100 g of Na, 89.36 mg/100 g of K, 4.02 mg/100 g of Cu, 1.71 mg/100 g of Zn,2.03 mg/100 g of Fe. The major fatty acid in bone and flesh of cultured eel were generally oleic acid $(44.40\%, 43.76\%)$, palmitic acid $(24.19\%,\;21.30\%)$, palmitoleic acid $(8.18\%,\;7.72\%)$, eicosapentaenoic acid $(5.72\%,\;6.65\%)$, myristic acid $(3.96\%,4.34\%)$ in order. The fstty acid composition of total lipid was no significant difference among bone and flesh of cultured eel, However, bone of cultured eel revealed higher content in saturated and monounsaturated fatty acid, while lower in polyunsaturated fatty acid than those of the flesh. It is shown that cultured eel contains various nutrients such as protein, minerals, unsaturated fatty acid, so cultured eel can be regarded as a highly nutritious food.