• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1465-1470
• /
• 2006

This paper presents a design of low power CMOS LNA(Low Noise Amplifier) for 2.4 GHz ZigBee applications that is a promising international standard for short area wireless communications. The proposed circuit has been designed using TSMC $0.18{\mu}m$ CMOS process technology and two stage cascade topology by current reuse technique. Two stage cascade amplifiers use the same bias current in the current reused stage which leads to the reduction of the power dissipation. LNA design procedures and the simulation results using ADS(Advanced Design System) are presented in this paper. Simulation results show that the LNA has a extremely low power dissipation of 1.38mW with a supply voltage of 1.0V. This is the lowest value among LNAs ever reported. The LNA also has a maximum gain of 13.38dB, input return loss of -20.37dB, output return loss of -22.48dB and minimum noise figure of 1.13dB.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.262-266
• /
• 2020

In this paper, we proposed an effective technique for hiding the watermark in the LSB of a color image by applying spatial encryption techniques. Even if the watermark hidden in the LSB of the image is extracted, the information of the extracted watermark cannot be decrypted because the watermark is encrypted using various spatial encryption techniques. Therefore, if the watermark is concealed in the LSB using the spatial encryption techniques proposed in this paper, the security is greatly improved compared to the existing technique of embedding the watermark in the LSB. When watermarking is performed by applying the proposed technique, the image quality of the watermark-concealed image is very good, so it is impossible to distinguish it from the original image, and the watermark, which is confidential data, can be extracted from the watermarked image without loss. The performance of the proposed technique was mathematically analyzed and the superiority of the proposed technique was confirmed through experiments. When the watermark was concealed by applying the proposed technique to Lenna, airplane, Tiffany, and pepper images having a size of 512×512, the PSNR values of the watermarked images were 53.91dB, 54.10dB, 54.09dB, and 54.13dB, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.259-262
• /
• 2006

This paper presents a design of low power CMOS LNA(Low Noise Amplifier) for 2.4 GHz ZigBee applications. The proposed circuit has been designed by using TSMC $0.18{\mu}m$ CMOS process and current-reused two-stage cascade topology. LNA design procedures and the simulation results using ADS(Advanced Design System) are presented in this paper. Simulation results shows that the LNA has a extremely low power dissipation of 1.38mW with a $V_{DD}$ of 1.0V. The LNA also has a maximum gain of 13.38dB, input return loss of -20.37dB, output return loss of -22.48dB and noise figure of 1.13dB.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.46-52
• /
• 2011

In the paper, MIMO antenna for LTE 13 band, LTE 7 band wireless communication service is proposed. The proposed antenna is designed where on the top of FR-4(${\epsilon}_r=4.4$, thickness=-.8mm). In proposed structure, two Planar Inverted F Antennas (PIFAs) using meander and folded structure are symmetrically designed for the miniaturization. The isolation between two antennas was also improved by using two slits on the ground plane. The isolation values of the fabricated antenna exhibits -18 dB, -13dB at LTE 13 and LTE 7 band, respectively. The average gain and efficiency are - 4.1 dBi, 41% on LTE 13 band, -1 dBi, 81% on LTE 7 band, respectively. Thus the proposed antenna can be applied to the LTE system.

• Applied Biological Chemistry
• /
• v.39 no.2
• /
• pp.153-158
• /
• 1996

During the screening of herbicidal substances from microbial secondary metabolites using photoautotrophic cells, a strain of ME-13 with strong herbicidal activity was isolated from soil. Based on the taxonomic studies, the strain was identified as Streptomyces. Two active compounds were purified from the culture broth through the column chromatographies using active charcoal, silica gel, MCI gel, and ODS HPLC. The compounds were identified as AB3217-A and B, respectively, related to anisomycin by spectroscopic methods. AB3217-A and B completely suppressed the germination of radish and barnyard grass at 25 ppm. In comparison to anisomycin, they showed the 6 times higher inhibitory activities against the growth of shoot and root of radish and barnyard grass with EC5O of around 6 ppm.

• Food Quality and Culture
• /
• v.1 no.1
• /
• pp.13-17
• /
• 2007

The volatile flavor compounds of Saussurea lappa C.B. Clarke, a perennial, aromatic and medicinal herbaceous plant of the Asteraceae family, were isolated by the hydro distillation extraction method using a Clevenger-type apparatus, and analyzed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC/MS). The plant yielded a light yellow colored oil (0.02%, v/w). From S. lappa C.B. Clarke root oil, sixty-three volatile flavor compounds were tentatively identified, among which sesquiterpene was predominant (21.70%). The identified compounds of the root oil constituted 87.47% of the total peak area. From the constituents making up more than 5% of the volatile flavor components, a long-chain aldehyde, (7Z, 10Z, 13Z)-7, 10, 13-hexadecatrienal, was the most abundant volatile flavor compound (21.20%), followed by dehydrocostuslactone (10.30%) belonging to sesquiterpene lactone, valerenol (5.30%) and vulgarol B (5.06%).

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.421-422
• /
• 2008

In this paper, CMOS RF front-end circuits for an L1/L5 dual-band global positioning system (GPS)/Galileo receiver are designed in $0.13\;{\mu}m$ CMOS technology. The RF front-end circuits are composed of an RF single-to-differential low noise amplifier, an RF polyphase filter, two down-conversion mixers, two transimpedance amplifiers, a IF polyphase filter, four de-coupling capacitors. The CMOS RF front-end circuits provide gains of 43 dB and 44 dB, noise figures of 4 dB and 3 dB and consume 3.6 mW and 4.8 mW from 1.2 V supply voltage for L1 and L5, respectively.

• Journal of Species Research
• /
• v.7 no.2
• /
• pp.135-150
• /
• 2018

Eleven bacterial strains 17SD2_15, 17Sr1_23, 17SD2_13, 17Sr1_31, 17gy_18, 16B15D, 16B02D, 16B04G, 16B01D, 17U4-2 and 17J28-10 assigned to the phylum Proteobacteria were isolated from soil samples collected from Seoul Women's University, in South Korea. The Belnapia species, strain 17SD2_15 was cocci-shaped and pink-colored. The Methylobacterium species, strain 17Sr1_23, 17SD2_13, 17Sr1_31, and 16B15D were short rod-shaped and pink-colored. The Microvirga species, strain 17gy_18, and 16B02D were short rod-shaped and pink-colored. The Oxalicibacterium species, strain 16B04G was short rod-shaped and pink-colored. The Sphingomonas species, strain 16B01D was short rod-shaped and yellow-colored. The Variovorax species, strain 17U4-2 was cocci-shaped and yellow-colored. The Paracoccus species, 17J28-10 was cocci-shaped and orange-colored. Phylogenetic analysis based on 16S rRNA gene sequence showed that strains 17SD2_15, 17Sr1_23, 17SD2_13, 17Sr1_31, 17gy_18, 16B15D, 16B02D, 16B04G, 16B01D, 17U4-2 and 17J28-10 were most closely related to Belnapia soli (with 99.9% similarity), Methylobacterium gregans (99.1%), Methylobacterium isbiliense (99.6%), Methylobacterium oxalidis (99.9%), Microvirga aerilata (98.7%), Methylobacterium aerolatum (99.0%), Microvirga vignae (100.0%), Noviherbaspirillum canariense (100.0%), Sphingomonas desiccabilis (100.0%), Variovorax humicola (99.6%), and Paracoccus acridae (99.1%), respectively. This is the first report of these eleven species in Korea.

• Progress in Superconductivity and Cryogenics
• /
• v.13 no.4
• /
• pp.5-9
• /
• 2011

We have fabricated the superconducting $MgB_2$/carbon fiber by physical vapor deposition method. Mg (Magnesium) and B (Boron) were simultaneously deposited on the carbon fiber using the RF-sputtering and thermal evaporation, respectively. To ensure the relatively high vapor pressure of Mg at the growth region and the subsequent phase stability of $MgB_2$ at the deposition temperature, inverted funnel-like guide made of Mg-foil was employed while one side of the guide were open for the sputtered B flux. Mg vapor pressure should be controlled precisely to secure the complete reaction. The $MgB_2$/carbon fiber showed a uniformly deposited thin layer with dense and well-formed grains. The $MgB_2$/carbon fibers in this study showed $T_c$~37.5K, $J_c$ ~ $2{\times}10^4\;A/cm^2$ in the 20K, 0T.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.2
• /
• pp.79-82
• /
• 2005

This study investigated the effect of nitriding on the hardness and adhesion properties of $TiB_2$ coatings. Inductively coupled plasma (ICP) was used for both nitriding and deposition. By applying ICP, H13 steel was nitrided at a high rate of $50\;{\mu}m/hr$. After nitriding, a Fe4N compound layer or a diffusion layer was formed according to the hydrogen/nitrogen ratio. Both layers could improve the load-bearing capacity of the substrate by increasing the substrate hardness. The adhesion of the $TiB_2$ coatings increased to $\~30N$ after nitriding, but the hardness of the coating was lowered to 20-30 GPa. However, the adhesion of the $TiB_2$ coatings with a high hardness (>60 GPa) could not be improved substantially by nitriding due to the large difference in hardness between the coating and the substrate. The grain size of the $TiB_2$ coating was larger on the nitrided substrates, resulting in a decrease in the hardness of the coating.