• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.492-495
• /
• 2001

In order to utilize a parallel machine tool for CAM system, the development of adequate interpolator is necessary. This paper presents a quintic B-spline interpolator with algorithm of limiting maximum interpolation error. The favored property of near arc-length parametrization in the curve representation is used in the implementation of the reference command generation. Then, this interpolator is applied to cubic parallel manipulator to show its validity.

• Structural Engineering and Mechanics
• /
• 제18권2호
• /
• pp.247-262
• /
• 2004

In the earlier application of the spline finite strip method(FSM), the uniform B3-spline functions were used in the longitudinal direction while the conventional interpolation functions were used in the transverse direction to construct the displacement filed in a strip. To overcome the shortcoming of the uniform B3-spline, non-periodic B-spline was developed as the displacement function. The use of non-periodic B3-spline function requires no tangential vectors at both ends to interpolate the geometry of shell and the Kronecker delta property is also satisfied at the end boundaries. Recently, non-periodic spline FSM which was modified to have a multiple knots at the boundary was developed for the shell analysis and applied to the analysis of bridges. In the formulation of a non-symmetric spline finite strip method, the concepts of non-periodic B3-spline and a stress-resultant finite strip with drilling degrees of freedom for a shell are used. The introduction of non-symmetrically spaced knots in the longitudinal direction allows the selective local refinement to improve the accuracy of solution at the connections or at the location of concentrated load. A number of numerical tests were performed to prove the accuracy and efficiency of the present study.

• 한국전산유체공학회지
• /
• 제3권2호
• /
• pp.1-8
• /
• 1998

We make use of cubic B-spline interpolation function in two cases: heat conduction and fluid flow problems. Cubic B-spline test function is employed because it is superior to approximation of linear and non-linear problems. We investigated the accuracy of the numerical formulation and focused on the position of the breakpoints within the computational domain. When the domain is divided by partitions of equal space, the results show poor accuracy. For the case of a heat conduction problem this partition can not reflect the temperature gradient which is rapidly changed near the wall. To correct the problem, we have more grid points near the wall or the region which has a rapid change of variables. When we applied the unequally spaced breakpoints, the results show high accuracy. Based on the comparison of the linear problem, we extended to the highly non-linear fluid flow problems.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.156-163
• /
• 2003

This research presents modeling of a functional surface which is a constructed free-formed surface. The modeling introduced in this paper adopts modified B-spline that is utilizing approximating technique. The modified B-Spline is constructed with altered control vertices. It is applied to measure points on a surface of an impeller blade. This research builds a surface-modeler accepting inputs of measured points. Generation of cutter-paths for NC machining employs the model of the constructed surfaces. The machined surfaces which is generated in several cases are compared in the aspect of machining accuracy.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.656-659
• /
• 1996

An universal NURBS interpolation for an open architectured CNC controller is proposed in order to unify internal data structure and algorithm of different interpolations such as linear, circular and spline, and to intelligently interface CAD database of the various workpiece contour. Furthermore, NURBS interpolation may result in better surface roughness and high speed machining due to the continuous generation of cutter movement. The mathematical manipulation of NURBS is presented and the practical implementation on the CNC controller of a lathe is discussed for real machining. The comparison between a computer design and workpieces machined on a lathe shows the feasibility of the NURBS interpolation format as an universal interpolation scheme.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.318-321
• /
• 2003

In order to generate the extrusion die surface of non-symmetric H- and U-shaped sections, an automatic surface construction method based on B-spline surface and scalar field theory is proposed in this study. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.197-200
• /
• 2003

An automatic surface construction method based on B-spline surface and scalar field theory is proposed to generate the extrusion die surface of complicated sections in this paper. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.15-22
• /
• 2005

This research presents modeling of a functional surface that is constructed with a free-formed surface. The modeling of functional surfaces, being introduced in this paper, adopts a modified B-spline that utilizes an approximating technique. The modified B-Spline is constructed with altered control vertices. It is applied to measure the surface of an impeller blade. This research builds an algorithm accepting inputs of measured points. Generating the cutter-paths for NC machining employs the model of the constructed surfaces. The machined surfaces that are generated in several cases are compared with each other in the aspect of machining accuracy.

• 소성∙가공
• /
• 제12권6호
• /
• pp.572-581
• /
• 2003

In this paper, an automatic surface construction method based on B-spline surface and scalar field theory is proposed to generate the extrusion die surface of non-symmetric H-and U-shaped sections. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u-and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections. To verify the validity of the proposed method, automatic surface generation is carried out for extrusion die of non-symmetric H-and U-shaped sections.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1990년도 추계학술대회
• /
• pp.38-41
• /
• 1990

A new spline function for resampling discrete signal adaptively is proposed. In general, B-spline function is used for an image interpolation because of its smoothness and continuity, but accompanies a large amount of blurring effect. Hence, we developed a new spline function to remedy this effect, with two procedures ; deblurring of Gaussian blurring and diminishing of aliasing effect caused by deblurring procedure. The proposed function has a parametric expression with $\alpha$ which is related to the variance of Gaussian blurring model. Locally adaptive resampling scheme is obtained by changing a according to statistical characteristics of an image. The proposed, interpolation function shows edge-sharpening effect as well as noise smoothing, with comparison to the conventional schemes.