• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10b
• /
• pp.544-546
• /
• 2000

이 논문에서는 CAGD 및 기하모델링 분야에서 최근 발표된 Universal Parametrization의 계산적 또는 응용적 특성을 고찰하고자 한다. Universal Parametrization을 이용하여 구한 B-spline의 곡선이나 곡면에 아주 자연스러운 특성을 가지고 있다. 뿐만 아니라, 다른 매개변수(Parametrization)을 이용하는 경우, 점들의 기하학적 분포나 곡선/곡면의 차수에 따라 결과의 차이가 심한 경우가 있으나 새로운 방법은 B-spline이라는 기초함수의 특성을 고려한 매개변수법이므로 이러한 결과의 차이를 최대한 줄이는 특성이 있다. 또한 점 데이터에 관해서 Affine Invariant하고 Semi-localness의 특성을 보인다. 이외에도, 계산적인 관점에서 강인성을 보유하고 있고, 많은 응용분야에서 쉽게 자유곡선이나 자유곡면 모델링을 할 수 있도록 한다. 한 예로, 3D 다각형 메쉬로부터 B-spline을 이용한 자유곡면 모델을 구하는 소프트웨어 툴을 설명한다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.40-44
• /
• 2001

선형개발에 대한 연구는 주로 대형선박을 기준으로 Bezier, B-spline 그리고 NURBS와 같은 합성곡선생성기법을 이용하여 일반 곡선기법으로는 표현하기 힘든 구상선수나 굴곡이 심한 선미 등을 표현하고 검증하는 것으로 이루어지고 있다. 하지만, 전체 선박의 70%를 차지하고 있는 중소형 어선의 선형에 대한 연구나 기술적인 보고는 상대적으로 미흡한 실정이다. 본 연구에서는 기존의 라운드타입에서 챠인 및 신챠인타입으로 변화해 가는 중소형 어선의 선형을 NURBS기법을 이용하여 표현하고, 전산화하는 프로그램을 개발하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.127-138
• /
• 1997

In this study, a new technique is presented, by which one can define ship hull form with full fairness from the input data of lines. For curve modeling, the de Casteljau Algorithm and Bezier control points are used to express free curves and to establish the unified curve modeling technique which enables one to convert non-uniform B-spline (NUB) curve or cubic spline curve into composite Bezier curves. For surface modeling, the mesh curve net which is required to define surface of ship hull form is interpolated by the method of the unified curve modeling, and the boundary curve segments of Gregory surface patches are generated by remeshing(rearranging) the given mesh curve net. From these boundary information, composite Gregory surfaces of good quality in fairness can be formulated.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1962-1969
• /
• 1999

Active contours are deformable energy minimizing curves controlled by internal energy and external energy. The internal energy is constraint to preserve a smooth curve, and the external energy guides the curve towards image features. B-spline representation of active contours can be of great benefits in the segmentation and description whose shape is characterized by its defining polygon or control points. Menet et al proposed B-spline representation of active contours based on dynamic programming. The method is simple and efficient by comparing over finite difference method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.866-871
• /
• 1994

B-spline curves and surfaces are effective solutions for design and modelling of the freeform models. The control methods of these are using with control points, knot vectors and weight of NURBS. Using control point is easy and resonable for representation of general models. But the movement of control points bring out the reformation of original convex hull. The B-splines with nonuniform knot vector provide good result of the shape modification without convex hull reforming. B-splines are constructed with control points and basis functions. Nonuniform knot vectors effect on the basis functions. And the blending curves describe the prorities of knot vectors. Applying of these, users will forecast of the reformed curves after modifying controllabler primitives.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.386-392
• /
• 2002

In this paper, we propose a novel blocking effect reduction method based on a rational B-spline. The blocking effect results from independent coding of each image block and becomes highly visible especially coded at very low bit rates. The proposed approach adopts a rational open uniform B-spline curve that used to produce a smooth curve through a set of control points. The pixels on the block boundary are treated as control points, and the weight values, which decide the shape of curve, are determined differentially by considering the distance the position of the pixels and that of the block boundary. The simulation results show that the proposed method has excellent performance for all pattern of the blocking effect with less computational complexity.

• The KIPS Transactions:PartB
• /
• v.15B no.4
• /
• pp.307-314
• /
• 2008

This paper presents a new robust watermarking method for curves that uses informed-detection. To embed watermarks, the presented algorithm parameterizes a curve using the B-spline model and acquires the control points of the B-spline model. For these control points, 2D mesh are created by applying Delaunay triangulation and then the mesh spectral analysis is performed to calculate the mesh spectral coefficients where watermark messages are embedded in a spread spectrum way. The watermarked coefficients are inversely transformed to the coordinates of the control points and the watermarked curve is reconstructed by calculating B-spline model with the control points. To detect the embedded watermark, we apply curve matching algorithm using inflection points of curve. After curve registration, we calculate the difference between the original and watermarked mesh spectral coefficients with the same process for embedding. By calculating correlation coefficients between the detected and candidate watermark, we decide which watermark was embedded. The experimental results prove the proposed scheme is more robust than previous watermarking schemes against print-scan process as well as geometrical distortions.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2006

This paper addresses B-spline curve approximation of a set of ordered points to a specified toterance. The important issue in this problem is to reduce the number of control points while keeping the desired accuracy in the resulting B-spline curve. In this paper we propose a new method for error-bounded B-spline curve approximation based on adaptive selection of dominant points. The method first selects from the given points initial dominant points that govern the overall shape of the point set. It then computes a knot vector using the dominant points and performs B-spline curve fitting to all the given points. If the fitted B-spline curve cannot approximate the points within the tolerance, the method selects more points as dominant points and repeats the curve fitting process. The knots are determined in each step by averaging the parameters of the dominant points. The resulting curve is a piecewise B-spline curve of order (degree+1) p with $C^{(p-2)}$ continuity at each knot. The shape index of a point set is introduced to facilitate the dominant point selection during the iterative curve fitting process. Compared with previous methods for error-bounded B-spline curve approximation, the proposed method requires much less control points to approximate the given point set with the desired shape fidelity. Some experimental results demonstrate its usefulness and quality.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.4
• /
• pp.381-386
• /
• 1997

The offsetting method using geometric properties of B-spline control polygon is more faster than using of general normal vector in offset processing. But this method itself does not solve the prob¬lems of loop removal in normal offsetting. Generally the distance between neighborhood spans of B-spline control polygon is greater than the offset distance, the loops are occurred in offsetting. For generating of the more precision tool-path in NC machining, the loops of offset must be removed. In this paper, two methods for loop removal are introduced in offsetting of B-spline curve. One is using the intersection of B-spline control span which being occurred of the loop. The other is using two B-spline curve divisions divided from original B-spline curve or its offset curve. After the inter¬section point of loop was searched, the loop being removed to cusp. Also the method for filleting of cusp is inspected to more precision cutting. It is shown that the offsetting using B-spline control polygon is more effective in the sculptured surface machining.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.24-29
• /
• 1993

This paper describes a method for generating an initial hull form by using form parameters. As a mathematical representation of curves, B-spline curves are used as well as the polynomials used by Durand et al. The five basic control curves and the centerline contour are defined to give the boundary conditions for body plan by using above mentioned mathematical models. From these curves body plan is determined. Two additional curves which are concerned the position of matching point between the cylindrical form and the water line are proposed to get the preliminary faired water lines.