• Structural Engineering and Mechanics
• /
• 제38권2호
• /
• pp.211-229
• /
• 2011

In this paper, we present a new explicit procedure using periodic cubic B-spline interpolation polynomials to solve linear and nonlinear dynamic equation of motion governing single degree of freedom (SDOF) systems. In the proposed approach, a straightforward formulation was derived from the approximation of displacement with B-spline basis in a fluent manner. In this way, there is no need to use a special pre-starting procedure to commence solving the problem. Actually, this method lies in the case of conditionally stable methods. A simple step-by-step algorithm is implemented and presented to calculate dynamic response of SDOF systems. The validity and effectiveness of the proposed method is demonstrated with four examples. The results were compared with those from the numerical methods such as Duhamel integration, Linear Acceleration and also Exact method. The comparison shows that the proposed method is a fast and simple procedure with trivial computational effort and acceptable accuracy exactly like the Linear Acceleration method. But its power point is that its time consumption is notably less than the Linear Acceleration method especially in the nonlinear analysis.

• 방송공학회논문지
• /
• 제9권4호
• /
• pp.384-390
• /
• 2004

본 논문에서는 44.1KHz에서 48KHz로 표본화 주파수를 변환하는 알고리듬들의 성능을 비교한다. 비교 한 기법은 다위상 구조로 구현된 기본적인 기법, sinc 함수를 이용한 기법, 다위상 구조의 다단계 구현 기법, 그리고 B-spline을 이용한 기법 등이다. 먼저, 공정한 비교를 위해 이 4가지 기법을 이용한 표본화율 변환기들을 고품질 조건하에 재설계하고, 이들의 H/W 복잡도를 메모리 요구량과 계산량 측면에서 비교하였다. 그 결과, 메모리 요구량 측면에서는 B-spline을 이용한 기법이 가장 우수하였지만, 계산량 측면에서는 기본적인 기법과 sinc 함수를 이용한 기법이 가장 우수함을 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.1961-1970
• /
• 2002

A laser scanner is widely used fur a device fur acquiring point data in reverse engineering. It is more efficient to generate a surface automatically from the line-typed data than scattered data of points clouds. In the case of a compound model, it is hard to represent all the scanned data into one surface maintaining its original line characteristics. In this paper, a method is presented to generate a surface by the segmentation of measured point data. After forming triangular net, the segmentation is done by the user input such as the angle between triangles, the number of facets to be considered as small segment, and the angle for combining small segment. B-spline fitting is implemented to the point data in each segment. The surface generation through segmentation shows a reliable result when it is applied to the models with curvature deviation regions. An useful algorithm for surface reconstruction is developed and verified by applying an practical model and shows a good tools fur reverse engineering in design modification.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.492-495
• /
• 2001

In order to utilize a parallel machine tool for CAM system, the development of adequate interpolator is necessary. This paper presents a quintic B-spline interpolator with algorithm of limiting maximum interpolation error. The favored property of near arc-length parametrization in the curve representation is used in the implementation of the reference command generation. Then, this interpolator is applied to cubic parallel manipulator to show its validity.

• 대한전기학회논문지
• /
• 제40권4호
• /
• pp.394-401
• /
• 1991

B-spline function is generally used for an image interpolation because of its smoothness and continuity, but it accompanies a large amount of blurring effect. In this paper, a space-variant B-spline interpolation function is proposed through deblurring process followed by de-aliasing process. The proposed function has parametric expression and performs smoothing and edge-enhancement adaptively in the interpolation process according to local property of the image. Application of this function to image enlargement, rotation, and curve representation producted good results. Even in the presence of noise, noise smoothing effect as well as edge-enhancement were observed in the image interpolation process.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제13권3호
• /
• pp.217-224
• /
• 2009

In this paper we present an approximation method of quadric surface using quartic spline. Our method is based on the approximation of quadratic rational B$\acute{e}$zier patch using quartic B$\acute{e}$zier patch. We show that our approximation method yields $G^1$ (tangent plane) continuous quartic spline surface. We illustrate our results by the approximation of helicoid-like surface.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.358-363
• /
• 1998

An algorithm for representing the cubic spline interpolation of differentiable functions by a fuzzy system is presented in this paper. The cubic B-spline functions which form a basis for the interpolation function are used as the fuzzy sets for input fuzzification. The ordinal number of the coefficient cKL in the list of the coefficient cij's as sorted in increasing order, is taken to be the output fuzzy set number in the (k, l) th entry of the fuzzy rule table. Spike functions are used for the output fuzzy sets, with cij's as support boundaries after they are sorted. An algorithm to compute the support boundaries explicitly without solving the matrix equation involved is included, along with a few properties of the fuzzy rule matrix for the designed fuzzy system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.590-593
• /
• 2002

본 논문은 그레이영상에 대해 2D 스플라인 보간법과 2D 웨이블릿 변환을 적용하여 영상모핑을 실현한 연구이다. 프레임 간 특징 점 지정에 스플라인 함수로 B-스플라인 보간법을, 생성되는 중간 영상에 웨이블릿 변환 기법을 적용하였다. 그 결과 스플라인에 의해 유동적인 곡선변형과 웨이블릿 변환에 의해 블럭킹 열화가 제거되어 중간 영상들의 자연스러운 모핑이 이뤄졌다.

• Communications for Statistical Applications and Methods
• /
• 제28권5호
• /
• pp.537-551
• /
• 2021

We conducted a study on a regression spline estimator with a few pre-specified auxiliary variables. For the implementation of the proposed estimators, we adapted a coordinate descent algorithm. This was implemented by considering a structure of the sum of the residuals squared objective function determined by the B-spline and the auxiliary coefficients. We also considered an efficient stepwise knot selection algorithm based on the Bayesian information criterion. This was to adaptively select smoothly functioning estimator data. Numerical studies using both simulated and real data sets were conducted to illustrate the proposed method's performance. An R software package psav is available.

• Journal of Information Processing Systems
• /
• 제10권1호
• /
• pp.23-35
• /
• 2014

Recently, novel application areas in digital geometry processing, such as simulation, dynamics, and medical surgery simulations, have necessitated the representation of not only the surface data but also the interior volume data of a given 3D object. In this paper, we present an efficient framework for the shape approximations of spherical solid objects based on trivariate B-splines. To do this, we first constructed a smooth correspondence between a given object and a unit solid cube by computing their harmonic mapping. We set the unit solid cube as a rectilinear parametric domain for trivariate B-splines and utilized the mapping to approximate the given object with B-splines in a coarse-to-fine manner. Specifically, our framework provides user-controllability of shape approximations, based on the control of the boundary condition of the harmonic parameterization and the level of B-spline fitting. Experimental results showed that our method is efficient enough to compute trivariate B-splines for several models, each of whose topology is identical to a solid sphere.