• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2B
• /
• pp.97-109
• /
• 2012

In this paper, we propose a modulation scheme for a network-coded bi-directional relaying (NBR) system over an asymmetric channel, which means that the qualities of the relay channel (the link between the BS and RS) and access channel (the link between the RS and MS) are not identical. The proposed scheme employs a dual constellation in such a way that the RS broadcasts the network-coded symbols modulated by two different constellations to the MS and BS over two consecutive transmission intervals. We derive an upper bound on the average bit error rate (BER) of the proposed scheme, and compare it with the hybrid constellation-based modulation scheme proposed for the asymmetric bi-directional link. Furthermore, we investigate the channel utilization of the existing bi-directional relaying schemes as well as the NBR system with the proposed dual constellation diversity-based modulation (DCD). From our simulation results, we show that the DCD gives better average BER performance about 3.5~4dB when $E_b/N_0$ is equal to $10^{-2}$, while maintaining the same spectral efficiency as the existing NBR schemes over the asymmetric bi-directional relaying channel.

• Korean Journal of Mathematics
• /
• v.32 no.1
• /
• pp.1-14
• /
• 2024

We seek for an invertible map B from L²(Γ) to L²(G), where G is a finite abelian group and Γ is the direct product of finite cyclic groups which is isomorphic to G, so that any Gabor frame in L²(G), is a generalized pseudo B-Gabor frame.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.19-23
• /
• 2015

In this paper, we present the return link ACM method to improve the link availability and system throughput for satellite communication service. Also, we describe the optimization of an algorithm for channel prediction using the LMS (Least Mean Square) adaptive filter and the MODCOD (Modulation & Code rate) decision. The simulation results show that the optimized filter taps and step-size of adaptive filter are 2 and 0.00026, respectively. And also confirms the required SNR margin for minimization of MODCOD decision error is 0.3dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1136-1142
• /
• 2010

In this paper, we reduced the optical noise interference using the ASK modulation with optoelectronic feedback in a wireless optical system in which a lighting LED is used as a light source. The carrier frequency of 70 kHz was generated internally by the oscillation in the optoelectronic feedback circuit, and the output light was ASK modulated at a data rate of 9.6 kbps by opening and shortening the feedback loop with the input signal. In an environment with adjacent noise lights, the ASK modulation with optoelectronic feedback improved the signal to noise ratio by about 25 dB.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.4189-4202
• /
• 2014

In this paper, we propose a priority-based unequal error protection scheme of data partitioned H.264/AVC video with hierarchical quadrature amplitude modulation. In order to map data with higher priority onto the most significant bits of QAM constellation points, a priority sorting method categorizes different data partitions according to the unequal importance factor of encoded video data in one group of pictures by evaluated the average distortion. Then we propose a hierarchical quadrature amplitude modulation arrangement with adaptive constellation distances, which takes into account the unequal importance of encoded video data and the channel status. Simulation results show that the proposed scheme improves the received video quality by about 2 dB in PSNR comparing with the state-of-the-art unequal error protection scheme, and outperforms EEP scheme by up to 5 dB when the average channel SNR is low.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.132-139
• /
• 2011

We investigate theoretically the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) on multi-channel subcarrier multiplexed (SCM) optical transmission systems in terms of the detected RF carrier power and SPM-induced power gain after transmission over single-mode fiber (SMF) links. According to the calculated power gain due to the SPM effect at the transmission distance of P3dB using the detected radio-frequency (RF) carrier power after photo-detection, the power gain is significantly degraded with large optical modulation index (OMI), small SCM channel spacing, and large fiber launching power because of the increased interaction between subcarrier channels. The nonlinear phase shift due to linear and nonlinear fiber characteristics is investigated to explain these results in detail. The numerical simulation results show that the OMI per SCM channel has to be smaller than 10 % for the fiber launching power of 10 dBm to guarantee prevention of SPM-induced power gain degradation below 0.5 dB for the SCM system with the channel spacing of 100 MHz. This result is expected to be utilized for the optical transmission systems using the SCM technology in future radio-over-fiber (RoF) networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.654-659
• /
• 2011

We propose a novel method to reduce laser chirp and improve modulation performance in semiconductor laser by using dual-electrode structure. Dual-electrode structure is realized by segmenting a electrode on top of gain medium, as was the case of edge emitting laser diode, into electrically isolated two electrodes. By using the proposed structure, we have experimentally achieved a reduction of laser spectral width of 0.23 nm and an improvement of 2.5-dB receiver sensitivity at an 80-km fiber transmission for 10-Gbps NRZ (non-return-to zero) data stream.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1214-1221
• /
• 2005

In this paper, we propose a digital watermarking method for still images, in which the human visual system (HVS) is used in the discrete cosine transform (DCT) domain. The modulation transfer function (MTF) of the HVS model is employed to increase the invisibility of the inserted watermark in images. The proposed watermarking method is shown to be robust to several common image processing techniques, including lowpass filtering and cropping. Also, using the energy relationship of the DCT, we derive the equation that directly computes the watermark weighting factor in the DCT domain for the specified peak signal to noise ratio (PSNR) of the still image and the length of watermark to be inserted. The difference between desired PSNR and PSNR in spatial domain is within 0.07dB for the 7 test images.

• ETRI Journal
• /
• v.39 no.5
• /
• pp.737-745
• /
• 2017

A 6-GHz-to-18-GHz monolithic nonuniform distributed power amplifier has been designed using the load modulation of increased series gate capacitance. This amplifier was implemented using a $0.25-{\mu}m$ AlGaN/GaN HEMT process on a SiC substrate. With the proposed load modulation, we enhanced the amplifier's simulated performance by 4.8 dB in output power, and by 13.1% in power-added efficiency (PAE) at the upper limit of the bandwidth, compared with an amplifier with uniform gate coupling capacitors. Under the pulse-mode condition of a $100-{\mu}s$ pulse period and a 10% duty cycle, the fabricated power amplifier showed a saturated output power of 39.5 dBm (9 W) to 40.4 dBm (11 W) with an associated PAE of 17% to 22%, and input/output return losses of more than 10 dB within 6 GHz to 18 GHz.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.163-167
• /
• 2013

As the mobile services have been increased, the interference of the neighboring base stations is increased and the PIMD(Passive Inter-Modulation Distortion) has been a main issue for the design of base station antenna systems. In this paper, it is proposed the PIMD test method for the active basestation antenna whose radiators are directly connected with main active parts including amplifiers, and we presents its test results using a developed active basestation antenna. From the results, the active basestation antenna has the better PIMD performance than conventional passive structure by 8.4dB. The proposed PIMD test method can be used to get the accurate PIMD test result because the test environment is very similar with real basestation.