• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.10a
• /
• pp.78-79
• /
• 2003

To further understanding of the role of calreticulin in insects, we have isolated a cDNA of calreticulin from silkworm, Bombyx mori. The cDNA encodes a 398 amino acid residues of B. mori calreticulin with endoplasmic reticulum retentional HDEL motif at its C-terminus, and a predicted molecular mass of 45801 Da. The B. mori calreticulin shows high protein homology with those of G mellonella (88%), A. aegypti (71%) and H. sapiens (63%). (omitted)

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.158-160
• /
• 2002

초정밀 박막저항을 제조하기 위하여, 3원계 5lwt%Ni-4lwt%Cr-8wt%Si 합금 타겟(Target)을 가지고 DC/RF 마그네트론 스퍼터를 이용하여 박막 저항을 제조하였고. 낮은 저항온도계수(TCR)를 가지는 박막을 만들기 위해 스퍼터링 제조공정의 변화에 따른 박막의 미세구조와 전기적인 특성을 조사하였다. 스퍼터링 제조공정 변수로써 스퍼터링 Power를 변화시켰고. 제조된 박막은 공기 중에서 400[$^{\circ}C$]까지 열처리하였다. 반응압력을 감소시킴에 따라 TCR값은 감소하였고, 기판온도 및 열처리 온도의 증가에 따라 TCR값도 증가하였다. 또한. 저항온도계수값은 DC와 RF의 변화에 따라 +52, -25(ppm/$^{\circ}C$)의 TCR값을 나타냈다 이와 같은 결과로부터 제조공정을 변화시킴에 따라 면저항 및 저항 온도계수의 제어가 가능함을 알 수 있었다.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.29-34
• /
• 1997

The feasibility of using the industrial inorganic waste materials such as l~mestone sludge. Soundly sand. coal fly 'ash, and chemical glasses as a raw material for cement clinker by melting treatmeut was iovestigated. The slag wh~ch is obtained from thc melts of the mixtnres of waste materials is composed of P-C,S(ZCaO - SIOJ and C,AS(ZCaO . AI,O, . SiO,) phases. The effect of melting tempcrabre, coaling condition and CIS ratio on the fo~mation of P-C,S phasc was examed. In order to obtain thc P-CiS phase which is useful in thc utilhtion as a clinkcr malcrid, it B found that sudl considerations as low melting temperature as possible of the wastc mixhire, quenching the melts and law CIS ratio of the mlxhlre are necessary.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.1
• /
• pp.99-102
• /
• 2003

A cDNA of novel immulectin homologue (BmIML), a C-type lectin, was cloned from the silkworm, Bombyx mori. The immulectin cDNA is an open reading frame of 921 bp encoding 307 amino acid residues. The deduced amino acid sequence from the BmIML cDNA contains two C-type carbohydrate recognition domains (CRDs). The BmIML was most similar (61 % protein sequence identity) to the M. sexta immulectin-1, whereas BmIML showed relatively lower identity to the B. mori lipopolysaccharide-binding protein (25% protein sequence identity). These features of BmIML indicate that BmIML is a novel member of C-type lectin superfamily. Northern blot analysis revealed that the BmIML is specifically expressed in the fat body of B. moli larvae.

• BMB Reports
• /
• v.47 no.10
• /
• pp.552-557
• /
• 2014

The main purpose of this study was to investigate whether type 3 muscarinic acetylcholine receptor (M3R) dysfunction induced vascular hyperpermeability. Transwell system analysis showed that M3R inhibition by selective antagonist 4-diphenylacetoxy-N-methylpiperidine methiodide (4-DAMP) and small interfering RNA both increased endothelial permeability. Using coimmunoprecipitation and Western blot assay, we found that M3R inhibition increased VE-cadherin and ${\beta}$-catenin tyrosine phosphorylation without affecting their expression. Using PTP1B siRNA, we found that PTP1B was required for maintaining VE-cadherin and ${\beta}$-catenin protein dephosphorylation. In addition, 4-DAMP suppressed PTP1B activity by reducing cyclic adenosine monophosphate (cAMP), but not protein kinase $C{\alpha}$ ($PKC{\alpha}$). These data indicate that M3R preserves the endothelial barrier function through a mechanism potentially maintaining PTP1B activity, keeping the adherens junction proteins (AJPs) dephosphorylation.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.1
• /
• pp.20-28
• /
• 2001

In order to predict thermodynamic performance of refrigeration system, it is required to know the oil concentration of the refrigerant/oil mixture. The current method is to extract the working mixture and then to measure the oil weight. In this study, oil concentration is measured in si.tu way without any extraction of the working fluid. Based on the measurement, a working equation is presented as follows, C=a +b x t +c x $t^2$ +(d + e x t +f x $t^2$) x SG. C is oil concentration, t is temperature($^{\circ}C). SG Is specific gravity of mixture and a~f is coefficients The oil concentration ranges over 0~l2 wt% and the temperature ranges over 20~50$^{\circ}C. The specific gravity and temperature are measured using the on-line densimeter and thermometer. This working equation enables to predict the oil concentration without any extraction of the mixture. This equation can be applied for R-12/Naphthenic oil and R-134a/P0E oil liquid mixtures.

• Journal of the Korean Ceramic Society
• /
• v.38 no.1
• /
• pp.39-44
• /
• 2001

솔-젤법으로 S $r_{0.9}$B $i_{2.1}$T $a_2$$O_{9}$ stock solution을 합성하고, Ir $O_2$/ $SiO_2$/Si 및 기판 위에 스핀코팅법으로 약 2000$\AA$ 정도의 두께를 가지고 SBT 박막을 제조하였다. Pt/Ti $O_{x}$ 전극을 사용한 SBT 박막과 비교하였을 때 Ir $O_2$전극을 사용한 SBT 박막의 경우 더 낮은 급속 열처리 온도 즉, 72$0^{\circ}C$에서 형석상에서 층상 페롭스카이트 상으로의 상전이가 관찰되었다. 그리고, Ir $O_2$전극을 사용한 SBT 박막은 낮은 열처리에서 결정성장이 이루어졌다. Ir $O_2$전극을 사용한 SBT 박막은 $650^{\circ}C$에서 열처리하였을 때 포화된 이력곡선을 얻었지만, Pt/Ti $O_{x}$ 전극을 사용한 SBT 박막은 $700^{\circ}C$에서 열처리하였을 때 이력곡선이 관찰되었다. Ir $O_2$전극을 사용한 SBT 박막은 $700^{\circ}C$의 열처리에서 8.79 $\mu$C/$ extrm{cm}^2$ (3V)의 2Pr 값을 나타내었다.나타내었다.다.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.87-89
• /
• 2005

$Bi_{3.25}Y_{0.75}Ti_{3}O_{12}$[BYT] ferroelectric thin films were deposited by RF-Sputtering method on the $Pt/Ti/SiO_2/Si$. We investigated the effects of processing condition (especially post-annealing) on the structural and ferroelectric properties of the BYT thin films. Increasing the annealing temperature, the peak intensity of (117) increased and c-axis orientation decreased. The BYT thin films crystallized well at $600^{\circ}C$ for 30min. No secondary phases observed in the XRD pattern. At annealing temperature of $700^{\circ}C$, the thin films had no cracks and the grain was uniform. The calculated lattice constants of BYT thin films were a=0.539nm, b=0.536nm, c=3.288nm. The remnant polarization of the $Bi_{3.25}Y_{0.75}Ti_{3}O_{12}$ capacitor reached $1.8uC/cm^2$ at an applied field about 400kV/cm. The BYT thin films can be used as capacitors in Ferroelectric Random Access Memory device.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.130-132
• /
• 2005

Tungsten carbon nitride (W-C-N) thin films were produced by reactive radio frequency (RF) magnetron sputter-ing of tungsten in $Ar-N_2$ gas mixture. The effects of the variation of nitrogen partial pressure on the composition, and structural properties of these films as well as the influence of post-deposition annealing have been studied. When $La_{0.67}Sr_{0.33}MnO_3$ was coated on the W-C-N/Si substrate, coercivity ($H_c$) and magnetization at room temperature shows 58.73 Oe, and 29.4 emu/cc, respectively. In order to improve the diffusion barrier characteristics, we have studied the impurity behaviors to control the ratios of nitrogen and carbon concentrations.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.8 no.2
• /
• pp.80-88
• /
• 2000

In order to predict thermodynamic performance of refrigeration system, it is required to know the oil concentration of the refrigerant/oil mixture. The current method is to extract the working mixture and then to measure the oil weight. In this study, oil concentration is measured in si.tu way without any extraction of the working fluid. Based on the measurement, a working equation is presented as follows, C=a +b x t +c x $t^2$ +(d + e x t +f x $t^2$) x SG. C is oil concentration, t is temperature($^{\circ}C). SG Is specific gravity of mixture and a~f is coefficients The oil concentration ranges over 0~l2 wt% and the temperature ranges over 20~50$^{\circ}C. The specific gravity and temperature are measured using the on-line densimeter and thermometer. This working equation enables to predict the oil concentration without any extraction of the mixture. This equation can be applied for R-12/Naphthenic oil and R-134a/P0E oil liquid mixtures.