• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.684-688
• /
• 2001

The structural, piezoelectric and dynamic range characteristics of modified PbTi $O_3$ceramics were investigated as a function of Mn $O_2$addition. With the increase of Mn $O_2$addition, Curie temperature was decreased. As the increase of Mn $O_2$addition, mechanical quality factor ( $Q_{mt3}$) in the third over tone thickness mode was increased. Dynamic range in the third over tone thickness mode was also increased with the increase of Mn $O_2$addition. The composition ceramics added to 0.075wt% Mn $O_2$showed the best properties for SMD type resonator using third over tone thickness vibration in terms of high Curie temperature more than 31$0^{\circ}C$ and dynamic range of 49.38dB.B.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권8호
• /
• pp.457-466
• /
• 2002

The speed and position control of SRM(Switched Reluctance Motor) needs the encoder or resolver to obtain the rotor position information. These position sensors can be affected by the EMI, dusty, and high temperature surroundings. Therefore the speed and position sensorless control has been studied widely In this paper, the binary observer of the SRM which has two feedback compensation loops to control the speed of SRM is proposed. One loop reduces the estimation error like the sliding mode observer, and the other removes the estimation error chattering occurred in the sliding mode observer. This observer is constructed on the basis of variable structure control theory and has the inertial term to exclude the chattering. This method has a good estimation performance in spite of nonlinear modeling of SRM. The advantages of the proposed method are verified experimentally.

• 대한전자공학회논문지TC
• /
• 제44권3호
• /
• pp.92-97
• /
• 2007

스위칭 모우드 증폭기를 마이크로파 대역에서 이용하고자 하는 많은 연구가 있으며, 이러한 증폭기 중 E급 증폭기는 이론적으로 스위칭 동작을 통해 100%의 효율을 얻을 수 있다. 본 논문에서는 2.4GHz 대역 마이크로파 E급 증폭기로 출력 전력이 17.6dBm, 66%의 전력부가효율을 갖는 설계된 증폭기를 무선 랜 송신부에서 사용하기 위해 증폭기의 비선형 왜곡을 보상하고자 테이블 참조기법(Look Up Table)을 이용한 기저대역 사전왜곡 기법을 적용하였다. 설계된 증폭기는 -3dBm의 입력 무선랜신호를 인가하였을 때 출력스펙트럼 측정 결과가 IEEE 무선랜 스펙트럼 마스크 표준규격을 만족하며, 기저대역 사전왜곡을 적용하였을 때 중심주파수에서 20MHz offset인 주파수에서 최대 5dB의 ACPR 특성이 향상되었다.

• 한국인터넷방송통신학회논문지
• /
• 제12권3호
• /
• pp.217-222
• /
• 2012

모드 전송선로 이론을 이용하여 플라즈마 광 편파기의 편파특성을 정확하게 분석하였다. 제안한 해석법의 타당성 및 정확성을 분석하기 위하여 새로운 편파조건인 모드 억압비율(mode suppression ratio)을 정의하였다. 수치해석 결과, 플라즈마 광 편파기는 유전체로 구성된 전형적인 광 편파기에 비하여 편파거리가 현저하게 짧은 $10{\mu}m$로 나타났다. 또한, 플라즈마 광 편파기를 구성하는 금속 성분인 Ag에 기인한 삽입손실은 -1dB 이하로 무시할 정도로 작았다.

• 전자공학회논문지C
• /
• 제36C권11호
• /
• pp.10-17
• /
• 1999

본 논문에서는 MOS 트랜지스터로만 이루어진 CMOS IADC(Current-mode Analog-to-Digital Converter)를 설계하였다. 각 단은 CSH(Current Sample-and-Hold)와 CCMP(Current Comparator)로 구성된 1.5-비트 비트 셀로 구성되었다. 비트 셀 전단은 CFT(Clock Feedthrough)가 제거된 9-비트 해상도의 차동 CSH를 배치하였고, 각 단 비트 셀의 ADSC(Analog-to-Digital Subconverter)는 2개의 래치 CCMP로 구성되었다. 제안된 IADC를 현대 0.65 ㎛ CMOS 파라미터로 ACAD 시뮬레이션 한 결과, 20 Ms/s에서 100 ㎑의 입력 신호에 대한 SINAD(Signal to Noise-Plus-Distortion)은 47 ㏈ SNR (Signal-to-Noise)는 50 ㏈(8-bit)을 얻었고 35.7 ㎽ 소비전력 특성을 나타냈다.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.693-700
• /
• 2003

The effect of the configuration of the nozzle and the impinging surface on the characteristics of the hole-tones has been experimentally investigated. It is found that the plate-tone is a special case of hole-tones, where the hole diameter is zero. The jet velocity range for hole-tones is divided into the low velocity region associated with laminar jet and the high velocity region with turbulent jet. The frequency of the tone is that for the shear layer instability at the nozzle exit or that attainable by a cascade of vortex pairing process with increase of the impinging distance. When the distance is longer than one diameter the frequency decreases to the terminal value near the preferred frequency of the column mode instability, in the range 0.23< $St_d$<0.53, where $St_d$ is the Strouhal number defined by $fd/U_J$, f the frequency, d the nozzle diameter, and $U_J$ the exit velocity. While the convection speed of the downstream vortex, in the present study, is almost constant at low-speed laminar jet, it increases with distance at high-speed turbulent jet. As the frequency increases, the convection speed decreases in the low frequency range corresponding to the preferred mode, in agreement with the existing experimental data for a free jet.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.766-772
• /
• 2003

The pseudospectral method for stability analysis was used to find the most influential disturbance mode for transition of plane channel flows and Blasius flow at their critical Reynolds numbers. A number of various oblique disturbance waves were investigated for their pseudospectra and resolvent norm contours in each flow, and an exhaustive search method was employed to find the disturbing waves to which the flows become most unstable. In plane Poiseuille flow an oblique disturbance with a wavelength of 3.59h (where h is the half channel width) at an angle $28.7^{\circ}$ was found to be the most influential for the flow transition to turbulence, and in plane Couette flow it is an oblique wave with a wavelength of 3.49h at an angle of $19.4^{\circ}$. But in Blasius flow it was found that the most influential mode is a normal wave with a wavelength of $3.44{\delta}_{999}$. These results imply that the most influential disturbance mode is closely related to the fundamental acoustic wave with a certain shear sheltering in the respective flow geometry.

• 응용통계연구
• /
• 제22권3호
• /
• pp.499-513
• /
• 2009

An economic signal in the real world usually reflects complex phenomena. One may have difficulty both extracting and interpreting information embedded in such a signal. A natural way to reduce complexity is to decompose the original signal into several simple components, and then analyze each component. Spectral analysis (Priestley, 1981) provides a tool to analyze such signals under the assumption that the time series is stationary. However when the signal is subject to non-stationary and nonlinear characteristics such as amplitude and frequency modulation along time scale, spectral analysis is not suitable. Huang et al. (1998b, 1999) proposed a data-adaptive decomposition method called empirical mode decomposition and then applied Hilbert spectral analysis to decomposed signals called intrinsic mode function. Huang et al. (1998b, 1999) named this two step procedure the Hilbert-Huang transform(HHT). Because of its robustness in the presence of nonlinearity and non-stationarity, HHT has been used in various fields. In this paper, we discuss the applications of the HHT and demonstrate its promising potential for non-stationary financial time series data provided through a Korean stock price index.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.388-393
• /
• 2012

Vibration condition monitoring at low rotational speeds is still a challenge. Acoustic emission (AE) is the most used technique when dealing with low speed bearings. At low rotational speeds, the energy induced from surface contact between raceway and rolling elements is very weak and sometimes buried by interference frequencies. This kind of issue is difficult to solve using vibration monitoring. Therefore some researchers utilize artificial damage on inner race or outer race to simplify the case. This paper presents vibration signal analysis of low speed slewing bearings running at a low rotational speed of 15 rpm. The natural damage data from industrial practice is used. The fault frequencies of bearings are difficult to identify using a power spectrum. Therefore the relatively improved method of empirical mode decomposition (EMD), ensemble EMD (EEMD) is employed. The result is can detect the fault frequencies when the FFT fail to do it.

• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1321-1328
• /
• 2003

본 논문에서는 finite-extent backed conductor를 가지는 CPW(Coplanar waveguide) 방향성 결합기에서, 방향성의 향상을 위해 backed conductor의 가운데 부분을 적절한 길이로 제거하는 보상구조를 제안하였다. backed conductor의 가운데 부분이 적절한 길이를 가지고 제거될 경우, 결합기의 가운데 부분에서 기 모드의 유효 유전율이 크게 감소하여 전기적 길이가 달라지므로, 우 모드와 기 모드의 위상속도가 동일하게 인식된다. 따라서 결합기의 방향성은 향상이 되며, 이때 제거된 backed conductor의 적절한 길이는 결합기의 기 모드와 우 모드의 관계로부터 구하여질 수 있다. 이 보상 구조가 효과적임을 보이기 위해 1 GHz의 중심주파수를 가지는 보통의 결합도를 갖는 CPW 방향성 결합기를 설계하였으며, 기존의 구조에 비해 모의실험과 측정에서 각각 36 dB, 20 dB이상 개선된 우수한 방향성특성과 함께 우수한 정합특성을 가짐을 확인하였다.