• Composites Research
• /
• v.13 no.2
• /
• pp.72-80
• /
• 2000

Effect of graphite powder addition on the mechanical properties of carbon fiber reinforced carbon composites (C/C composites) was investigated. Greenbody (G/B) with 0~30wt.% graphite powder addition to phenol resin was prepared and carbonized at $1000^{\circ}C$ to make C/C composites. Flexural strengths of 20wt.% graphite powder additions showed maximum values in the both case of G/B and C/C composites. But, at the graphite addition over 20wt.%, there was negative effect due to the matrix inhomogeneity. Flexural strength of cured resin without graphite Powder was higher than that with graphite. However, flexural strength of carbonized resin with graphite increased three times as much as that of carbonized resin without graphite. Because the addition of graphite powder effects the restraint of shrinkage after carbonization and the deflection of crack path. In Mode II ENF test, energy release rates($G_{II}$) of G/B and C/C composites with the 20w1.% addition of graphite were both increased. But, the addition of graphite was more effective to the increase of $G_{II}$ in C/C composites than that in G/B.

• Journal of the Korea Society for Simulation
• /
• v.16 no.1
• /
• pp.21-29
• /
• 2007

In this paper, we present a method of detecting the boundary of the intima-media complex for automated measurement based on dynamic programming from carotid artery B-mode ultrasound images and then show the experimental results. We apply the dynamic programming for determining the optimal locations that a cost function is minimized. The cost function includes cost terms which are representing image features such as intensity, intensity gradient and geometrical continuity of the vessel interfaces. Moreover, we improve the boundary continuity by applying the B-spline to smooth the rough boundary due to noise such as speckle, dropout and weak edges. The proposed method has obtained more accurate reproducible results than conventional edge-detection by considering multiple image features and ensures efficient automated measurement by solving the problems of the inter- and intra-observer variability and its inefficiency due to manual measurement.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.59-64
• /
• 2023

In this paper, It is proposed through the empirical design of a Conducted EMI filter for noise reduction of power used in electronic devices. For the proposed structure, A-type, B-type, C-type, and D-type structures were designed, and conductive noise reduction was confirmed by using an LC network with various X-capacitors, Y-capacitors, and Air-inductors. 10 [μH] was used for L1 and L2, and 4.7 [nF] was used for C1 and C2. L3 for common mode used 13[μH], and C5, C6, C7 were designed using 10[nF]. The measured insertion loss values of the designed EMI filter were -74.4[dB] at 3.2MHz, -75.4[dB] at 4MHz, and -75.3[dB] at 13.56MHz. Therefore, the proposed EMI filter will be able to reduce power supply noise used in various electronic devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7B
• /
• pp.1006-1012
• /
• 2001

본 논문에서는 다른 클럭원들을 갖는 서로 다른 오실레이터에 의해 발생된 비동기 클럭을 입력으로 받아 동기신호로 변환시키는 기능과 그 중 어느 한 클럭이 동작하지 않더라도 동작하는 클럭을 계속 유지하여 클럭 중단의 위험을 제거한 안전모드를 추가한 기능의 구현을 기술한다. 특히, 통신 분야에서 ASIC으로 Chip을 개발할 때 다중 클럭의 사용은 필연적이며 비동기 신호를 동기신호로 변환하는 기능의 구현은 기본적이면서도 중요한 부분이다. 이 회로는 VHDL로 구현이 되었으며 다중 클럭 관련 ASIC 구현에 기본적으로 응용이 가능하다.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.337-340
• /
• 2003

This paper presented practical details about control-loop design and dynamic analysis for a peak current-mode controlled asymmetrical half-bridge(ASHB) do-to-dc converter, Graphical loop gain method is used to design the feedback compensation and analyze the closed-loop performance of ASHB converter. The results of the control design and closed-loop analysis are validated by experiments on a prototype converter.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.139.1-139.1
• /
• 2005

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.4
• /
• pp.891-907
• /
• 2020

In this paper, we consider the Cauchy problem to the tropical climate model. We establish the global regularity for the 2D tropical climate model with generalized nonlocal dissipation of the barotropic mode and obtain a multi-logarithmical vorticity blow-up criterion for the 2D tropical climate model without any dissipation of the barotropic mode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.792-795
• /
• 2006

In-plane-switching (IPS)-mode LCD is one of the most useful technologies for a broad range of viewing angles. To apply for IPS-LCDs, we synthesized novel homogeneous alignment materials, changing dianhydrides (BTDA and BPDA) and bridged diamines (ODA and PACM). We measured their pre-tilt angles using the crystal rotation method with positive LC and their surface properties.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3E
• /
• pp.7-13
• /
• 1997

This paper addresses traffic prediction issues on MPEG. A new adaptive traffic prediction scheme is proposed using MPEG picture characteristic that picture traffic depends on the coding mode of that picture, that is, I, P, and B mode. Our prediction scheme, which is based n picture decomposition (PD) and the cross-correlation of the different types of pictures, has better performance in predicting bursty MPEG traffic than that of the first-order autoregressive (AR) prediction scheme. Our simulation results show that the performance is further improved about 15% by utilizing the cross-correlations between pictures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.552-559
• /
• 1998

Conducted noise in power line contains both the common mode(CM) and differential mode(DM) noise. These two modes of noise are caused by different noise sources and paths. Therefore, CM/DM noise must be deal with individually in EMI filter. In this paper the technique to separate power line noise is presented, which can be used to measure both the CM and the DM noise from total generated noise. Also, noise-separator is designed and experimental results showed 30 dB above of separation performance in 10 kHz~10 MHz.