• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.7-13
• /
• 2014

In this paper, a novel waveguide low pass filter for satellite communication is proposed. The proposed low pass filter is designed to obtain wideband characteristics without the interference of higher order modes, sufficient attenuation in the stop-band and small sized lightweight characteristics by evanescent-mode ridge structure. To improve return loss and rejection loss, rectangular ring is inserting around the ridges in the waveguide. Input and output ports of the low pass filter is designed by using the impedance step structure for the impedance matching of the filter. The proposed waveguide low pass filter is fabricated and then measured as return loss over 19.5 dB, insertion loss less than 1.41 dB at the pass-band of 7.25 ~ 8.4 GHz and rejection loss over 67.2 dB at the stop-band of 12.25 ~ 14.5 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.87-94
• /
• 2008

This paper proposes a high-gain monopulse antenna using the folded reflectarray for a monopulse target-tracking radar systems designed at the center frequency of 94 GHz. In target-tracking radar systems, the angle of arrival of the incoming wave Is determined by comparing the signal received on two or more non-coincident antenna patterns. This is the physical basis of most target-tracking techniques and the comparison is made simultaneously in a monopulse radar systems. In this paper, the antenna consists of polarizing grid, reflectarray, multimode feed horn, and comparator implemented by wavguide. The antenna is able to have three radiation patterns by using the monopulse feed systems assembled by multimode feed horn and comparator. The antenna demonstrates maximum gains 36dB, 33.5dB and 27.2dB at sum mode, azimuth mode, and evevation mode respectively.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.525-528
• /
• 2002

The proposed EMC filter composed with feed-through capacitors and ferrite beads of high permeability was prepared which satisfy the EMC standard for a wide-band noise signal in the frequence of 10 MHz to 1.5 GHz in power supply line. The optimum structure of ferrite bead was found by calculating the load effect of ferrite beads. As a result, the filter showed excellent differential- and common-mode noises filtering characteristics above 30dB in the frequency band from 10 MHz to 1.5 GHz. The immunity characteristics are improved more than 10 to 30 dB over the frequency band from DC to 1.8GHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.21-26
• /
• 2024

Design and fabrication method of W-band 12-way radial power combiner is proposed in this paper. The proposed structure is used with TE₁₀ to TEM mode converter, which is realized using 2-step impedance transformer. The pin structure for mode converter is well bonded to the housing so that environment conditions such as vibration or shock are not affected. Proposed W-band power combiner has less than 0.7 dB insertion loss and more than 13 dB return loss from 88 GHz to 98 GHz. The measured output isolations between each other are greater than 7.5 dB from 82 to 100 GHz and phase differences are less than 10 degree from 88 to 96 GHz. Proposed power combiner is expected compact radar and various applications requiring for high power and stable environment conditions.

• 전기의세계
• /
• v.44 no.12
• /
• pp.13-20
• /
• 1995

본 고에서는 ATM(Asynchronous Transfer Mode)기반으로 개발되고 있는 광대역 종합정보통신망(B-ISDN: Broadband Integrated Services Digital Network)의 구조 및 이를 기반으로 제공할 수 있는 광대역 서비스의 형태에 대해 기술한다. 또한 B-ISDN의 기술적 목표가 되는 ATM 기술과 관련된 최근의 표준 동향, ATM 통신 장비의 개발 및 서비스 개발 현황에 대하여 살펴본다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.411-414
• /
• 2007

In this paper, we studied on characteristic improvement of Balun-BPF using dual-mode ring resonators. The simulated Balun-BPF shows bandwidth of 150MHz at center frequency of 2.45GHz, 4-pole characteristic, return loss of 15dB and symmetrical out-put characteristic.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.4
• /
• pp.244-247
• /
• 2000

In this paper, a discrete-time sliding mode controller for linear time-varying systems with disturbances is proposed. The proposed method guarantees the systems state is globally uniformly ultimately bounded(G.U.U.B) under the existence of time-varying disturbances.

• ETRI Journal
• /
• v.38 no.4
• /
• pp.695-702
• /
• 2016

A hierarchical approach for fast bi-dimensional empirical mode decomposition (B-EMD) is proposed. The presented approach utilizes an efficient window size determination scheme that enables the multi-level computation of the order statistics filter (OSF). Our detailed experiments show that the proposed OSF computation approach allows a significantly faster computation of an EMD without degrading the decomposition accuracy.

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.2
• /
• pp.57-62
• /
• 1998

The resonance frequencies, shunt impedances and Q-values for the higher-order modes in our designed cavity are calculated by the computer codes URMEL and MAFIA. A new computer code is developed to calculate the complex tune shifts for the randomness of the higher-order mode frequencies due to the construction errors of a cavity. The results with the construction errors are compared to those fo without error cases for the dipole mode and quadrupole mode.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.899-905
• /
• 2001

This paper presents a triple-mode dielectric resonator far low loss and simple structure filter design. The BPF(Band Pass Filter) was designed using HFSS simulation results an4 fabricated using proposed resonators. The filter (3-stage BPF) has an insertion loss of about 0.9 dB at the center frequency of 1.93 GHz and a 3 dB bandwidth of about 25 MHz. If more complex characteristic is required, slot coupling between resonators can be used. Especially, the proposed BPF can be applied to the next generation mobile communication IMT-2000 system.