• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.486-491
• /
• 2014

In this paper, the adsorption behavior and kinetic characteristics of cibacron brilliant red 3B-A from aqueous solution using granular activated carbon were investigated. The effect of various parameters such as adsorbent dose, pH, initial concentration, contact time and temperature on the adsorption system were studied. Base on the estimated Langmuir constant ($R_L$) and Freundlich constant (1/n), This process could be employed as effective treatment method. From the Temkin constant (B) and Dubinin-Radushkevich constant (E), This adsorption process is physical adsorption. From kinetic experiments, the adsorption process followed the pseudo second order model with good correlation. Base on the Gibbs free energy and enthalpy, the adsorption of cibacron brilliant red 3B-A onto granular activated carbon was physisorption and endothermic in nature.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.20-21
• /
• 2006

In this study, structural and microwave dielectric properties of the ${Ba_5}{B_4}{O_{15}}$ (B=Ta, Nb} cation-deficient perovskite ceramics with sintering temperature were investigated. All sample of the ${Ba_5}{B_4}{O_{15}}$ (B=Ta, Nb) ceramics prepared by conventional mixed oxide method and sintered at $1325^{\circ}C{\sim}1575^{\circ}C$. The bulk density and dielectric constant of the ${Ba_5}{Ta_4}{O_{15}}$ ceramics were increased continuously with increasing of sintering temperature. And the bulk density and dielectric constant of the ${Ba_5}{Nb_4}{O_{15}}$ ceramics was increased in $1375^{\circ}C{\sim}1400^{\circ}C$ but decerased in $1425^{\circ}C$. In the case of ${Ba_5}{Ta_4}{O_{15}}$ ceramics sintered at $1475^{\circ}C$ and ${Ba_5}{Nb_4}{O_{15}}$ ceramics sintered at $1400^{\circ}C$, The dielectric constant and quality factor, and temperature coefficient of the resonant frequency (TCRF) were 25.15, 53,105 GHz, $-3.06\;ppm/^{\circ}C$ and, 39.55, 28,052 GHz, $5.7\;ppm/^{\circ}C$ respectively.

• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.123-134
• /
• 1999

The electrical properties such as dielectric constant, dielectric loss factor and AC conductivity of grain were presented to measure the moisture content of grain using RF impedance. At frequency ranging from 1 to 10MHz and room temperature, $20^{\circ}C$, vector network analyzer(HP4195) and coaxial type sample holder were used to analyze the electrical properties of paddy(11∼24%w.b.), brown rice(11∼18%w.b.), barley(11∼21%w.b.) and wheat(11∼23%w.b.) depending on the moisture content, frequency and bulk density. The dielectric constant and AC conductivity of grain samples increased with moisture content and bulk density. The dielectric constants decreased with frequency and could be expressed as function of the moisture density(decimal moisture $content{\times}bulk$ density).

• Journal of electromagnetic engineering and science
• /
• v.1 no.2
• /
• pp.166-172
• /
• 2001

A novel RF tunable bandpass filter structure using dielectric resonators and varactor diodes is considered for the optimization to achieve constant bandwidth with minimum passband insertion loss. The coupling between resonators is realized by coupling windows and series lumped L, C elements are used to realize the input/output stage couplings. A 5 poles, 0.01 dB ripple Chebyshev type filter tuned from 800 MHz~900 MHz is designed and presented in this paper. The passband bandwidth for the design is 10 MHz (fractional bandwidth = 1.2 %). Experimental results show that the 3 dB passband bandwidth variation is 12.04 MHz~12.16 MHz (less than 1 %) and passband insertion loss is 15 dB~7 dB depending on the tuning voltages.

• 전기의세계
• /
• v.18 no.2
• /
• pp.15-20
• /
• 1969

The main focus of this paper is on the study of the .gamma. ray irradiation effect upon the electrical properties of a B-kind insulator which is one of the inorganic insulators. The mica is so typical of the B kind insulators as to be selected for a sample. DC, AC, and Impulse voltage is applied to the variable .gamma. ray irradiated dose samples with the constant time duration and the time variable samples with the .gamma. ray irradiated dose. The dielectric breakdown voltage and dielectric constant are measured from the samples and we get the experimental data that the dielectric breakown voltage variations are relatively large, but the dielectric constants are almost constant. The above conclusion is useful for the selection and application of the inorganic insulators under the irradiation effects, and we expect that the conclusion can apply to not only B-kind insulators but also the inorganic insulators.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.6
• /
• pp.875-882
• /
• 2002

The modeling for turbulent flow through a porous media has not been confirmed because of a undetermined constant which appears in the governing equations. In present study, the turbulent porous modeling based on the local thermal equilibrium has been extended to the turbulent clear flow. A undetermined constant is also suggested by microscopic analysis. The microscopic analysis is performed in the flat tube with micro-channels, and it confirms that the undetermined constant is 0.99. It is shown that the results of the macroscopic analysis using confirmed constant agree well with those of the microscopic analysis with a maximum error of 3.5%.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.457-458
• /
• 2008

This paper presents an output common mode current compensation method to achieve both constant Gm and constant gain. A conventional rail-to-rail CMOS op-amp with constant Gm was designed by using complementary differential input stage and current compensation skills. But it doesn't operate constant gain, because of output resistance variation. With $0.18{\mu}m$ CMOS process, the simulation results show that the differential gain variation can achieve less than 1.3dB. And a 60dB gain, a 13.5MHz unity gain-frequency, and 1mW power consumption, when operating at 1.8V and 10pF load.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.6
• /
• pp.1569-1575
• /
• 2019

In this paper we calculate three geometric constants, namely the von Neumann-Jordan constant, the James constant, and the Dunkl-Williams constant, for Morrey spaces and discrete Morrey spaces. These constants measure uniformly nonsquareness of the associated spaces. We obtain that the three constants are the same as those for $L^1$ and $L^{\infty}$ spaces.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.399-402
• /
• 2000

For improvement of B constant in $CaMnO_3$-$CaTiO_3$ perovskite type thermistors, effect of $Cr_2$$O_3$ addition ranged from 0.0wt% to 5.0wt% on electrical properties were investigated with contents and sintering temperatures in the view of crystal and microstructures. The solubility limit of Cr$_2$O$_3$was up to 0.5wt% judging from the result of lattice parameter. The grain size was decreased and the resistance at room temperature and B constant were increased with the addition of $Cr_2$$O_3$.On particular, B constant of$CaMnO_{3-x}$$Cr_2$$O_3$ system was increased greatly from 1574k to 2598k at 0.5wt% $Cr_2$$O_3$addition. Further addition of $Cr_2$$O_3$, however, resulted in the decrease of the resistance and B constant due to the $Cr_2$$O_3$ precipitation on the grain boundary. As the$CaTiO_3$contents increased in the $CaMnO_3$-$CaTiO_3$ system, the resistance at room temperature and B constant were highly changed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.1
• /
• pp.36-43
• /
• 2002

We analyze bulk service $M/G^{b}/1$ queues using the arrival time approach of Chae et al. (2001). As a result, the decomposition property of the M/G/1 queue with generalized vacations is extended to the $M/G^{b}/1$ queue in which the batch size is exactly a constant b. We also demonstrate that the arrival time approach is useful for relating the time-average queue length PGF to that of the departure time, both for the $M/G^{b}/1$queue in which the batch size is as big as possible but up to the maximum of constant b. The case that the batch size is a random variable is also briefly mentioned.