• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권1호
• /
• pp.1-5
• /
• 2006

The effect of A/B moi ratios and sintering temperatures on dielectric properties and microstructure of $(Ba_{0.93}Ca_{0.07})_m(Ti_{0.82}Zr_{0.18})O_3$ ceramics were investigated. The dielectric constant decreased with increasing the A/B mol ratio. However, the dielectric loss is improved. As the dielectric properties of A/B mol ratio with m = 1.009 at sintered temperature $1260^{\circ}C$, we obtained dielectric constant 12,800, dielectric loss $3.5\%$ and Y5V temperature characteristics. Highly reliable Ni-MLCCs, 1.6mm$(length){\time}0.8mm(width){\time}0.8mm$(height) with capacitance of 1.23 ${\mu}F$ and 야ssipation loss of $5.2\%$ were obtained employing dielectric material composed of $(Ba_{0.93}Ca_{0.07})_{1.009}(Ti_{0.82}Zr_{0.18})O_3$ - $MnO_2\;0.2wt\%-Y_2O_3\;0.18wt\%,\;-\;SO_2\;0.15wt\%-(Ba_{0.4}Ca_{0.6})SiO_3\;1wt\%$.

• 대한환경공학회지
• /
• 제27권10호
• /
• pp.1035-1042
• /
• 2005

입상활성탄 공정은 수처리에서 널리 사용되고 있으며, S와 B정수장은 기존의 급속여과지의 여재를 활성탄으로 교체하여 F/A 공정으로 운영하고 있다. 소독부산물의 제어를 위해 F/A가 도입된 금강수계 S정수장과 낙동강 수계 B정수장의 운영결과를 토대로 용존유기물질(DOC)과 소독부산물(DBPs) 등의 효율평가와 F/A공정 운영인자 등에 대하여 검토하였다. 두 정수장 원수의 용존유기물질 특성은 친수성과 소수성이 유사한 범위를 보이고 있으며, F/A공정에서 운영 초기 흡착능에 의한 빠른 파과특성을 나타내었다. F/A에서 소독부산물의 제거특성은 운영초기에 THM과 HAA 모두 제거효율이 우수하였으나, 운영기간이 경과되면서 THM제거율은 급격히 감소하였으며, HAA의 제거율은 동절기 저수온 시기를 제외하고는 생물학적 제거기작에 의해 높은 제거효율을 나타냈다. F/A공정은 활성탄흡착지(Post GAC) 공정과 비교하여 높은 유기물 부하, 잔류염소, 응집제 또는 응집보조제, 망간, 빈번한 역세척 등의 여러 가지 이유로 인해 여재 물성치 및 흡착능의 감소가 빠르게 나타났다. F/A공정이 실공정으로 도입되어 1년 이상 운영되어진 결과를 보면 활성탄 여재의 물성치 및 흡착능의 빠른 감소 경향이 있지만, 소독부산물 중 $HAA_5$항목이 문제시되는 정수장의 경우 기타여과지로 인증을 받은 F/A공정은 향후 점점 더 강화되는 수질기준의 만족을 위한 대안공정의 하나로서 적용이 가능하리라 판단된다.

• 한국전자파학회논문지
• /
• 제19권7호
• /
• pp.771-777
• /
• 2008

본 논문에서는 변형된 시간 지연 기법을 이용한 마이크로파 2차 주파수 체배기가 제안되었다. 제안된 주파수 체배기에서는 입력 신호와 지연된 신호 사이에 발생하는 군지연 시간 부정합을 전압 제어 지연 선로(VCDL)를 이용하여 보상하였다. 가변 슈미트 트리거를 이용한 군지연 시간 정합과 신호 파형의 성형(waveform shaping)으로 인해 원하지 않는 기본 주파수($f_0$)와 3, 4차 고조파 성분들이 충분히 제거할 수 있었다. 결과적으로 출력 단자에서는 오직 2 체배된 주파수 성분($2f_0$)만이 우세하게 나타난다 제안된 주파수 체배기는 1.15 GHz의 기본 주파수에서 설계되었고 TSMC 0.18 $\mu m$ 공정을 이용하여 제작되었다. 입력 신호 전력을 0 dBm 인가하였을 때, 2차 체배된 출력 주파수 성분의 측정된 전력은 2.57 dBm이었다. 2차 체배된 주파수 성분에 대해 $f_0,\;3f_0$, 그리고 $4f_0$ 성분의 제거율은 각각 43.65, 38.65, 그리고 35.59 dB이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권6호
• /
• pp.587-594
• /
• 1995

In order to estimate the nutritive value of roasted full-fat soybean (FFS) in carp diet, growth performance and excretion of protein and phosphorus were examined using carps having mean body weight of 111 g. Growth trial was conducted for 4 weeks using the fishes fed 5 diets (Control, $F_{24}S_{13}$, $F_{16}S_{27}$, $F_8S_{40}$ and $F_0S_{56}$) containing 32%, 24%, 16%, 8% and 0% of fish meal (F) and 0%, 13%, 27%, 40% and 56% of full-fat soybean, respectively. A total of 800 fishes were allotted randomly by groups of 40 to 5 treatments with 4 replicates per treatment. Fishes were fed to station eight times daily. Feeding trial was conducted for 4 weeks. As dietary FFS increased from 0% to 56%, weight gain of fish decreased from 91 g to 39 g and feed conversion ratio increased from 1.06 to 1.95. Protein efficiency ratio (PER) was highest (2.35) in control group which had the highest protein intake, while PER significantly decreased with decrease in protein intake as dietary FFS level increased. Although dietary protein and energy levels were maintained constant, protein excretion per kg weight gain varied from 273 g to 579 g for the groups control and $F_0S_{56}$, respectively. However, the value for control group was not significantly different to those for the groups $F_{24}S_{13}$ and $F_{16}S_{27}$. On the other hand, the highest protein retention efficiency was found in group fed the diet $F_{24}S_{13}$. Fish fed the diet $F_8S_{40}$ excreted the lowest phosphorus (P) based on kg weight gain showing the highest P retention efficiency of 62%. P excretion per kg feed intake was in the range of 5 g to 10 g for the groups $F_8S_{40}$ and $F_{24}S_{13}$, respectively. The present results indicated that as dietary FFS level increased, growth performance and feed utilization decreased while excretion of protein and phosphorus increased. Therefore, it was concluded that more than 25% substitution by FFS for fish meal could exert negative effects on growth and feed utilization of carp.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.385-388
• /
• 1999

This study is to investigate experimentally the shear capacity of high-strength reinforced concrete beams subjected to monotonic loading. Nine reinforced concrete beams using high strength concrete $(f'c=380kg/\textrm{cm}^2)$ are tested to determine their diagonal cracking and ultimate shear capacity. The main variables are shear span-depth ratio a/d=1.5, 2.5, 3.5, and shear reinforcement ratio. All specimens are 170mm wide and have a total depth of 300mm. The test results indicate that ACI 318-95(b) Code for shear capacity gave closest agrement with the exsprimental results. The beams with a shear spear-depth ratio 1.5 and 2.5. ACI 318-95 Code underestimates shear strength carried by vertical shear reinforcements.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.36-39
• /
• 2003

In this study, we made the high strength light weight concrete which was composed of the garnet minute powder to be the industry by-product in the YoungJoo region and the artificial light weight aggregate which the high temperature(1100℃) plastic process. The characteristic of the autogenous shrinkage had been considered about strength characteristic and the age passage In the following addition: The concrete's each unit quantity was determined 145,160,175㎏f/㎥.w/b and s/a was determined 30%, 43%, 45%. the each garnet's substitution ratio was determined 0, 10%. In this results, the compressive strength appeared greatly as the unit joining discretion grew bigger. The autogenous shrinkage ratio was increased rapidly until 7th day but it was reduced after 7th day regardless of the mixed factor. The autogenous shrinkage ratio which follows the change of the unit quantity and s/a increased together as the unit quantity and the s/a increases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.233-236
• /
• 2002

The high-pressurized spray nozzle is used f3r special washing and cutting with strong impact force. The performance of this nozzle, which focused on spray penetration and radial dispersion, was mainly investigated to maximize the momentum and minimize the flow loss. Hence, our experimental research was conducted by changing the aspect ratio ranging from 0 to 3 with nozzle outlet of 1.1. The spray trajectory far high-pressurized water was experimentally investigated using PDPA diagnostics, which was available at spray downstream region. As the spray at upstream near the nozzle exit did not show the improved disintegration. The results showed empirical correlation with regard to non-dimensional axial velocity distribution, spray penetration, and radial spreading rate with photographic visualization.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제4권2호
• /
• pp.117-120
• /
• 2002

Scelionid eggParasitoids Play an important role in biological control of some economically important pentatomids. Stink bug (Canthecona furcellatta Wolff,) is an important predator of Tasar silkworm larvae (Antheraea mylitta D.) and causes 30-40 percent loss in tasar silk industry. Psix striaticeps (Scelionid: Hymenoptera) has been found to be an important egg parasitoid. The parasitization potential of f striaticeps is mere than 60 percent and the sex ratio is female oriented. Studies indicate that the maintenance of existing scelionid population by avoiding harmful practices and the augmentation of scelionids either directly releasing them in the field or by indirectly making the field environment more favorable for them is an important aspect to control the pentatomid population in sericulture. Female bias sex ratio is advantageous to increase the parasitoid population in the field. 24-hour-old egg of stink bug and one-day old parasitoid is suitable for producing maximum progeny. 1 : 30 of parasitoid: host ratio is needed to regulate the estimated population in silkworm rearing field.

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1994년도 교수 연수회(역학)
• /
• pp.158-163
• /
• 1994

Slightly elevated urinary albumin excretion rate (microalhuminuria) is a marker of early diabectic nephropathy, but it is unclear if the established definition of microalbuminuria ($20-200{\mu}g/min$) is correct for children and adolescents. We investigated th.: albumin excretion rate, albumin/creatinine ratio and urinary albumin concentration in 150 healthy schoolchildren and adolescents to (a) obtain a reterence value for albumin excretion rate, (b) relate albumin excretion to pubertal stages and (c) evaluate albumin/creatinine ratio and morning albumin concentration as screening methods for elevated albumin excretion rate. Albumin concentration was measured by immunoturbidimetry in timed overnight urine samples. The albumin excretion showed a skewed distribution (geometric mean $3.2{\mu}g/min$, 95 percentile ($15.1{\mu}g/min$). In girls. a peak in the albumin excretion rate was found at the pubertal stage 4 (Tanner) and in boys at stage 5. Albumin/creatinine ratio of 2.5 mg/mmol as a screening level for elevated albumin excretion ($15{\mu}g/min$) showed a high positive (0.88) and negative (0.99) predictive value.

• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1299-1319
• /
• 2015

This paper presents a detailed parametric study, conducted using finite element tools to cover a range of several geometric and material parameters, on the behaviour of thin-walled partially encased composite (PEC) columns. The PEC columns studied herein are composed of thin-walled built-up H-shaped steel sections with concrete infill cast between the flanges. Transverse links are provided between the opposing flanges to improve resistance to local buckling. The parametric study is confined to eccentrically-loaded columns subjected to major axis bending only. The parameters that were varied include the overall column slenderness ratio (L/d), load eccentricity ratio (e/d), link spacing-to-depth ratio (s/d), flange plate slenderness ratio (b/t) and concrete compressive strength ($f_{cu}$). The overall column slenderness ratio was chosen to be the primary variable with values of 5, 10 and 15. Other parameters were varied within each case of L/d ratio. The effects of the selected parameters on the behaviour of PEC columns were studied with respect to the failure mode, peak axial load, axial load versus average axial strain response, axial load versus lateral displacement response, moment versus lateral displacement behaviour and the axial load-moment interaction diagram. The results of the parametric study are presented in the paper and the influences of each of the parameters investigated are discussed.