• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1220-1227
• /
• 2018

Avionics electronic equipment refers to the electronic equipment installed on an aircraft. Failure of avionics equipment can have a significant impact on aircraft operations as well as threaten the safety of pilots and passengers. Therefore, avionics electronic equipment is required to have higher reliability and safety than electronic equipment used for other purposes. Avionics equipment must consider various component selection and system design to meet reliability and safety-related requirements from the initial design stage. In this paper, we describe safety, reliability performance analysis method of avionics equipment, and introduce various design improvement methods that can be performed to meet safety requirement performance. Finally, the safety performance of the improved avionics equipment was reanalyzed and compared with the value before the improvement, the validity of the proposed design change was verified.

• Journal of Aerospace System Engineering
• /
• v.15 no.4
• /
• pp.47-56
• /
• 2021

In the management of aged aircraft, used avionics equipment is replaced with new ones to improve the performance and extend the life cycle of the aircraft. In this case, considering airworthiness, it is necessary to check whether the aircraft has sufficient electricity in the electric generator or the electrical distribution system, in accordance with the maximum electricity consumption of the new avionics equipment. Accordingly, this paper reviews a few airworthiness standards and guidelines associated with the electrical load analysis when an avionics equipment is upgraded in an aged aircraft, and proposes an optimization method for the electrical load analysis. In addition, it verifies the validity of the proposed method via the QFD theory, and is currently available for upgrading the performance of aged aircraft.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.377-383
• /
• 2021

In this paper, we describe the case of automatic test equipment development for hardware verification of stores management computer mounted on aircraft. Recently, the required functions of aircraft have been diversified and the related technologies of avionics equipment have developed, and the types and quantity of interfaces required for avionics equipment have increased. In addition to the existing old stores, the stores management computer also needs to control the interface in large quantities as the requirements for the new stores are added. For this reason, the time and manpower required for the inspection of avionic equipment are also increasing, and if the test process of avionic equipment can be automated and unmanned, more efficient inspection system operation will be possible. Therefore, this paper introduces the case of designing test software and test scenario to automate the structural design contents and verification process of test equipment required for the verification of hardware function of stores management computer.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.55-59
• /
• 2013

Before avionics equipment are installed in aircraft, several environmental tests such as temperature, vibration, lightning, fire etc. must be conducted. One of the environmental tests is to substantiate protection designs of lightning indirect effect. It can be showed through RTCA DO-160G, section22 "Lightning Induced Transient Susceptibility" test. An additional test of aircraft level is required as well after installation of avionics equipment.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.444-451
• /
• 2019

In this paper, we introduce the design consideration of the EMI and lightning induced transient protection circuit for RS-170a video signal on the avionics equipment. Avionics equipment is subject to the risk of malfunction or physical damage due to indirect lightning effect from lightning strike or electromagnetic interference from external environment. So in order to protect the avionics equipment from these effects, we should analyze the effect of electromagnetic interference and lightning strike on aircraft and apply protection design for each avionics device, but protection circuit may cause signal distortion if signal level is low and frequency is high. In this paper, we introduce common protection design for EMI and indirect lightning effect, and consideration for minimize signal distortion caused by protection circuit for RS-170a. In addition, we show some example of improvements to the actual equipment design using consideration discussed in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.383-386
• /
• 2017

Avionics, a type of embedded system, requires high safety and reliability. Failure of avionics equipment can have a significant impact on aircraft operations and, in the worst case, could result in loss of life for pilots and passengers. In this paper, we propose a Built-In-Test (hereafter referred to as BIT) design technique that can detect possible faults in avionics equipments in order to increase the reliability of avionics system and a design that can improve the Mean Time Between Failure (hereafter: MTBF) and applied it to real aviation electronic equipment to improve reliability.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.459-465
• /
• 2017

In this paper, we introduce the design consideration of the lightning induced transient protection circuit for the indirect lightning strike on the avionics equipment. The lightning induced surge voltage, which is so-called as indirect effects of lightning, may cause a functional failure or physical damage to the electrical and electronic equipment of aircraft. In order to protect the electrical and electronic equipment of aircraft from the indirect effects of lightning, we should analyze the effect of lightning strike on aircraft and consider applying protection design for each avionics device. However, lightning induced transient protection circuits can have unintended consequences because parasitic inductance elements are exist in PCB and TVS diodes. In this paper, we introduce the design method of the protection circuit considering the parasitic inductance of the protection circuit. In addition, we show the result of verification test performed to validate the protection circuits for indirect effects of lightning.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.64-69
• /
• 2018

Automatic test equipment for field maintenance of aircraft mounted equipment is effective for integrated design when operating a small number of aircraft for special purposes. The integrated automatic test equipment identifies commonly used interfaces and is used for branching or generating routes for each unit under test specific inspection. High-precision signals such as RTD, TC, and analog voltage can cause measurement errors due to conduction resistance during signal branching and connection when generating branches and paths. The measurement error caused by the resistance of the wire leads to a lot of restrictions in designing the equipment to be inspected. In this paper, we propose a method of calibrating highly accurate signals of an integrated automatic inspection equipment that minimizes measurement errors of analog voltage and high - precision signals.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.1
• /
• pp.61-67
• /
• 2007

The importance and cost of avionics system in the integration of an aircraft is continuously increasing. And we can expect enlarged software portion in the system integration for the more intelligent, reliable, and automated avionics system. Both military and commercial avionics community have moved toward commercial-off-the-shelf(COTS) equipment and open systems architecture not only to increase affordability but also to reduce acquisition cost, shorten development time and risk. The same concept is applied in developing avionics test system used for the avionics system integration test. In this paper, we present important topics in the development of avionics system including real-time operating system, interconnect data bus, software development methodology, software development process, and system integration test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.4
• /
• pp.48-54
• /
• 2020

Low cost launch vehicle for next-generation is underway in advanced space countries such as the United States, Europe, Japan and China. This paper surveys the latest technological trends in avionics system, including ground management system. In the case of on-board equipment, to make short the development period and reduce the cost, the equipment is standardized and modularized for each functions to flexibly respond to changes in system requirements. In addition, a network is applied to all inter-equipment interfaces and a powerful self-diagnostic function is included in the equipment to realize automation/simplification of the interface with the ground system, and it is confirmed that an efficient launcher system is realized.