• 한국항공운항학회지
• /
• 제29권1호
• /
• pp.1-8
• /
• 2021

Low level wind shear, which often occurs at Jeju International Airport, is a phenomenon that occurs when the topological location and topographical characteristics of Jeju Island are combined with weather characteristics. Low level wind shears, which are caused by rapid changes in wind direction and wind speed, pose a threat to aircraft safety and also cause abnormal situations, such as aircraft go-around, diversion, and cancellation. Many meteorological studies have been conducted on weather patterns, occurrence periods and frequency of low level wind shears. However, researches related to aircraft operations are limited where here we study the similarities and differences between strong southwest winds and bidirectional tailwind type low level wind shears based on aircraft go-around cases at Jeju International Airport. The results are expected to be used to enhance safety when operating to Jeju International Airport, which includes pilot training that reflects the characteristics generated by wind changes, pilot prior notification, providing pilots with latest trends, and increasing extra fuel.

• 한국항공운항학회지
• /
• 제30권4호
• /
• pp.184-190
• /
• 2022

In an attempt to apply hybrid rocket to the RATO (Rocket-Assisted Take Off) system, combustion characteristics of the non-circular grain were figured out in this study. Having larger combustion area, it was reconfirmed that the non-circular grain has advantages over regression rate, characteristic velocity and chamber pressure in which all gave higher values. Experiments were performed to understand the effect of the non-circular grain geometry over time where local regression rates depending on grain location were analyzed. It was found that the regression rate of five distinct locations were different. Partial conclusion driven was that these differences are due to the heat transfer caused by dissimilar distances from the flame layer. Besides, as combustion duration increased, the fuel port became circular, and the regression rate converged to a single value over the whole grain.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.781-787
• /
• 2014

F-76 선박용 디젤유와 JP-8 항공유의 연소과정에서 발생되는 입자상물질(PM)의 무차원 광소멸계수를 Transmission Cell를 이용하여 측정하였다. 무차원 광소멸계수의 측정방식은 각각 광원의 파장길이가 633 nm와 853 nm인 대역에서 중력식 필터법에 의해 채집된 PM의 농도와 광학적 방법에 의해 측정된 PM의 농도를 비교하는 방법을 통해 이루어졌다. 광원의 파장길이, 633 nm 대역에서 측정된 무차원 광소멸계수는 F-76의 연료에서 발생된 PM의 경우 8.8인 반면 JP-8 연로부터 생성된 PM의 경우 9.8이였다. 한편 광원 파장길이가 853 nm로 증가함에 따라 두 연료 모두에서 발생된 PM의 무차원 광소멸계수는 각각 8.2 (F-76)와 8.8 (JP-8)로 감소하는 경향을 나타내었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.548-551
• /
• 2010

추력 150 lbf 급의 초소형 터보제트 엔진이 개발되었다. 본 엔진은 소형 무인항공기(UAV), 기만기, 대공망 제압용 유도무기 등 다양한 무기체계에 적용이 될 수 있도록 고성능, 소형, 저가로 설계되었으며, 시제엔진을 제작하여 지상 성능 시험 및 고도 시험을 수행하였다. 본 논문에서는 소형, 저가, 고효율 터보제트 엔진을 구성하는 각 엔진 구성품의 특징, 구조, 구성품 및 엔진 시험 결과 등에 대하여 기술하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3019-3025
• /
• 2008

An experimental study was performed to assess the effect of diesel and JP-8 aviation fuel on the spray characteristics, performance and emissions in a single cylinder optical diesel engine. Both fuels were injected via an 8-hole solenoid-driven injector in a common-rail injection system. For better understanding of spray development, the macroscopic images were captured with high speed camera, offered evidences for the results of performance and emissions. From macroscopic spray images, the spray tip penetration of JP-8 shorter than that of diesel while spray angle of JP-8 was wider than that of diesel. It indicates that the vaporization of JP-8 is superior to that of diesel. The lower cetane number of JP-8 resulted in increased portion of premixed combustion. The IMEP with JP-8 is lower than that of diesel-fueled engine. Especially, using JP-8 has a potential for reducing soot.

• 항공우주기술
• /
• 제7권1호
• /
• pp.24-29
• /
• 2008

최근의 유가인상과 관련하여 상업용 및 군용 항공기 운용시의 연료 효율을 높이고자 하는 노력이 가속화되고 있다. 관련 연구에 의하면 수송기와 비즈니스 젯 항공기에 있어서 윙렛은 공력/구조적 효율성을 향상시키고, 적은 중량 증가로 저속 수송기의 상승 성능을 향상시킨다고 보고된 바 있다. 윙렛은 일반적으로 날개 끝에 장착되는 작은 공력면이며, 날개에 수직에 가깝게 장착되어 날개 끝단 와류의 순환 유동장내에서 작용한다. 윙렛의 설계는 위치, 높이, 테이퍼비, 후퇴각, 익형, toe-out 및 켄트각 등 많은 요소를 고려해야 하는 매우 복잡한 과정이다. 최근에는 미국 보잉사의 B737-800과 B787 등의 최신 기종에서 Blended 윙렛을 성공적으로 적용하여 날개끝의 길이를 늘리는 것(Wing Tip Extension) 보다 적은 추가 중량으로 같은 순항 성능을 도출하는데 성공하였다. 윙렛의 점성저항으로 인하여 최소항력은 증가하지만 높은 양력계수에서는 유도항력의 감소로 전체 항력이 감소하게 됨을 알 수 있다. 따라서, 윙렛은 강한 날개끝 와류를 발생시키는 높은 양력계수에서 순항하는 항공기에 더욱 적합하다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.167.2-167
• /
• 2001

This paper presents guidance and control laws which guarantee a minimum fuel consumption and have obustness against various disturbances during a terminal-landing phase on the lunar surface. The nonlinear robust tracking control system is designed to track the reference profiles, which are expressed by exponential functions. An adjustment law in the tracking controller is given in the form of the differential equations with respect to the controller´s variable gains. Computer simulations are performed to examine the tracking accuracy, the robustness in a thrust failure mode, and the vertical soft landing at a pre-assigned point on the lunar surface. The results of numerical simulation show the effectiveness of the present control law.

• Journal of Mechanical Science and Technology
• /
• 제20권7호
• /
• pp.1068-1076
• /
• 2006

A plate-fin type recuperator for a gas turbine/fuel cell hybrid power generation system was designed, manufactured, and tested. Performance analysis shows that the performance of the system is directly affected by the performance of the recuperator. Therefore, the recuperator should be designed and manufactured carefully, and its performance should be tested and verified before it is integrated into the system. In this paper, the developing procedure including designing, manufacturing, and testing of a cross flow plate-fin type recuperator was presented. Performance test results showed that the design requirements of the recuperator were almost satisfied. Based on the test results, improved design to reduce the size of the recuperator was suggested.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2006년도 에너지.가스.기후변화학회 연합춘계학술대회 및 특별심포지움
• /
• pp.300-306
• /
• 2006

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.726-739
• /
• 2003

A multi-dimensioanl model is being increasingly used to predict the thermo-flow field in the gas turbine combustor. This article addresses an integrated survey of modeling of the liquid spray formation and fuel distribution in gas turbine with high-shear nozzle/swirler assembly. The processes of concern include breakup of a liquid jet injected through a hole type orifice into air stream, spray-wall interaction and spray-film interaction, breakup of liquid sheet into ligaments and droplet,5, and secondary droplet breakup. Atomization of liquid through hole nozzle is described using a liquid blobs model and hybrid model of Kelvin-Helmholtz wave and Rayleigh-Taylor wave. The high-speed viscous liquid sheet atomization on the pre-filmer is modeled by a linear stability analysis. Spray-wall interaction model and liquid film model over the wall surface are also considered.