• Journal of the Korean housing association
• /
• v.13 no.5
• /
• pp.89-99
• /
• 2002

The multifamily housing has various advantages in construction cost, land-use intensity. KRIHS(1997) recommended the proper scale of th multifamily housing as 800 households in constructability, 1,000 households in facility compactability, 500 households in social aspect. At the early planning stage of project, the size of the multiftmily housing has, until now, been maximizingly considered under the regulation on which has been emphasized at the building volume ratio, land area, etc., except for the expenditure during the maintenance stage. This paper aimed at providing the proper size of multifamily housing in aspect of area and household number with maintenance cost at the early stage of project. For these, it took 곧 average cost function which is made from the 3-rd quardratic form and analyzes the unit increasing rate of the average cost. It surveyed in nationwide focused on the central heating system using diesel and kerosene. The number of samples is 88 and items of management cost is 11. The results are as follows ; first, 3rd-order quadratic function is proper at explaining the cost variation, considering the multicollinearity and statistics. Second, the proper size of multifamily housing is recommended with 83,000 $m^2$ on management area, 820 or over the 2,630 household number in aspect of total management cost.

• Journal of Korean Society for Quality Management
• /
• v.28 no.3
• /
• pp.44-52
• /
• 2000

In this paper we apply VSS X chart to the case when two assignable causes effect the process mean shift. We compare the case when two compound assignable causes effect the process mean with another one which effects individually. For the practical use of VSS $\bar{X}$ chart we propose the sample size which minimizes the average number of samples until the signal is given in out-of-control state.

• Parasites, Hosts and Diseases
• /
• v.49 no.1
• /
• pp.9-15
• /
• 2011

To understand the distribution of Giardia cysts in drinking water supplies in Seoul, Korea, we collected water samples quarterly at 6 intakes in the Han River, its largest stream and 6 conventional water treatment plants (WTPs) serving drinking water, from 2000 to 2009. Giardia cysts in each of 10 L water were confirmed in 35.0% of intake water samples and the arithmetic mean was 1.65 cysts/10 L (range 0-35 cysts/10 L). The lowest cyst density was observed at Paldang and Kangbuk intakes, and the pollution level was higher at 4 intakes downstream. It seemed that these 4 intakes were under influence of Wangsuk stream at the end of which cysts were found in all samples with the mean of 140 cysts/10 L. The annual mean number of cysts was 0.21-4.21 cysts/10 L, and the cyst level at the second half of the 10 years was about 1/5 of that at first half on average. The cysts were more frequently found in winter, and their mean density was 3.74 cysts/10 L in winter and 0.80-1.08 cysts/10 L in other seasons. All finished water samples collected at 6 WTPs were negative for Giardia in each of 100 L sample for 10 years and cyst removal by physical process was average 2.9-log. It was concluded that conventional water treatment at 6 WTPs of Seoul appears to remove the cysts effectively under the present level of their source water. Domestic wastewater from the urban region could be an important source of Giardia pollution in the river.

• Korean Journal of Animal Reproduction
• /
• v.10 no.2
• /
• pp.188-191
• /
• 1986

This experiment was carried out to examine the correlation among the semen characteristics of Holstein bulls. Seventy-two samples of semen were collected from 6 Holstein bulls, 2 to 10 years old. The characteristics of the semen were estimated by ordinary methods. The results obtained in this experiment were summarized as follows: 1. Semen characteristics on an average were 6.0 ml of volume, 16${\times}$108/ml of concentration, 92.4${\times}$108 of total sperm number(TSN), 72.1% of motility and 4.6% of abnormality. 2. Semen volume was positively high correlated (P<0.01) with total sperm number, but negative correlation was observed with the sperm motility (P<0.05) and semen concentration. 3. In relation to their age, older bulls semen volume and total sperm number were increased (P<0.01), but semen concentration and motility were decreased (P<0.01).

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.2
• /
• pp.85-93
• /
• 2012

In this paper, we proposed Wireless LAN (WLAN) localization method that enhances database construction based on weighting factor and analyse the characteristic of the WLAN received signals. The weighting factor plays a key role as it determines the importance of Received Signal Strength Indication (RSSI) value from number of received signals (frequency). The fingerprint method is the most widely used method in WLAN-based positioning methods because it has high location accuracy compare to other indoor positioning methods. The fingerprint method has different location accuracies which depend on training phase and positioning phase. In training phase, intensity of RSSI is measured under the various. Conventional systems adapt average of RSSI samples in a database construction, which is not quite accurate due to variety of RSSI samples. In this paper, we analyse WLAN RSSI characteristic from anechoic chamber test, and analyze the causes of various distributions of RSSI and its influence on location accuracy in indoor environments. In addition, we proposed enhanced weighting factor algorithm for accurate database construction and compare location accuracy of proposed algorithm with conventional algorithm by computer simulations and tests.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1053-1061
• /
• 2004

Of the 20 arbitrarily chosen primers, six oligonucleotides decamer primers were used on the basis of the number of the polymorphisms generated in catfish (Silurus asotus) from Yesan and bullhead (Pseudobagrus fulvidraco) from Dangjin in Korea. Six primers were used generating a total of 602 scorable bands in catfish and 195 in bullhead population, respectively, ranging in size of DNA fragments from less than approximately 100 to larger than 2,000 base pairs (bp). Six primers yielded 199 polymorphic fragments (33.1%) in catfish and 47 (24%) in bullhead, respectively. In the present study, a total of 328 common fragments (an average of 54.7 per primer) were observed in catfish population, whereas 84 (an average of 14.0 per primer) in bullhead. The total number of specific fragments in catfish and bullhead population were 76 and 64, respectively. In catfish population, random decamer, OPA-17 (GACCGCTTGT) generated the highest number of fragments (a total of 141) in comparison with other primers used, with an average of 11.8. The common bands in the molecular weight of 300 bp generated by random primer OPA-06 (GGTCCCTGAC) were present in every individuals in bullhead population. The major polymorphic bands in the molecular weight of 100 bp generated by OPA-17 were identified in lane 14, 15, 17, 18, 19 20 and 21, which were identifying species in bullhead population. The average bandsharing values (BS values) of all of the samples within catfish population ranged from 0.575 to 0.945, whereas 0.063-1.000 within bullhead population. The bandsharing value (index of similarity between individuals) between individual No. 5 and No. 9 showed the highest level within catfish population, whereas the bandsharing value between individual No. 1 and No. 2 showed the lowest level. The single linkage cluster analysis resulted from four primers, indicating four genetic groupings composed of group 1 (C1-C10, all of the catfish samples), group 2 (B11, B12, B13, B14, B16, B17, B18, B19), group 3 (B15) and group 4 (B20 and B21). The dendrogram reveals close relationships between individual identities within two species populations and individuals derived from the same ancestor, respectively. However, genetic distances between two species populations ranged from 0.124 to 0.333. The shortest genetic distance (0.042) displaying significant molecular differences was between individual No. 6 and No. 9 catfish population. The shortest genetic distance (0.033) displaying significant molecular differences also was between individual No. 18 and No. 19 in bullhead population. Reversely, the genetic distance of individual No. 20/21 among individuals in bullhead population was highest (0.333). This result showed that bullhead No. 20 and 21 were distinct from other individuals within bullhead population.

• Archives of Plastic Surgery
• /
• v.36 no.6
• /
• pp.685-690
• /
• 2009

Purpose: Autologous fat graft is a widely accepted technique used for soft tissue augmentation. Nonetheless, the use of fat graft is limited by unpredictable survival rates and repeated grafting. To avoid repeated grafting, cryopreserved fat graft technique has recently been widely used. On the other hand, the number of patients with chronic infection(who received cryopreserved fat injection) has currently been increasing. Therefore, this study was focused on the safety of cryopreserved fat injection from the infection. Methods: We collected 150 samples from local aesthetic clinics to examine the safety of cryopreserved autologous fat. To test for microbacterial contaminations of the cryopreserved fat specimens, microbacterial cultures & antibiotics sensitivity tests were performed. Then, we examined possible correlation between the preservation period and donor sites, focused on the results of microbacterial culture. Results: Cultures were positive for Staphylococcus epidermidis in 5 samples(methicillin - resistant Staphylococcus epidermidis in 4 samples), Micrococcus species in 3 samples. An average duration of preservation was 191 days and there was no significant correlation between the duration of preservation and microbacterial growth. Conclusion: Staphylococcus epidermidis was the leading cause of cryopreserved fat contamination, and the resistance to methicillin is common. Based on the above results, aseptic handling of fat during harvesting and preservation appeared to be most important.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.848-859
• /
• 2016

System failures in thermal power plants (TPPs) can lead to serious losses because the equipment is operated under very high pressure and temperature. Therefore, it is indispensable for alarm systems to inform field workers in advance of any abnormal operating conditions in the equipment. In this paper, we propose a clustering-based fault detection method for steam boiler tubes in TPPs. For data clustering, k-means algorithm is employed and the number of clusters are systematically determined by slope statistic. In the clustering-based method, it is assumed that normal data samples are close to the centers of clusters and those of abnormal are far from the centers. After partitioning training samples collected from normal target systems, fault scores (FSs) are assigned to unseen samples according to the distances between the samples and their closest cluster centroids. Alarm signals are generated if the FSs exceed predefined threshold values. The validity of exponentially weighted moving average to reduce false alarms is also investigated. To verify the performance, the proposed method is applied to failure cases due to boiler tube leakage. The experiment results show that the proposed method can detect the abnormal conditions of the target system successfully.

• Animal cells and systems
• /
• v.5 no.4
• /
• pp.333-339
• /
• 2001

Common carp (Cyprinus carpio) and its aquaculture breed Israeli carp samples were obtained from two separate aquaculture facilities under the similar raising conditions during two years in the Kunsan National University, Korea. Genomic DNA was isolated from the common carp and Israeli carp for identification of genetic characteristics and genomic polymorphisms by polymerase chain reaction amplification of DNA using arbitrary primers. The arbitrary primer No.21 (ACTTCGCCAC) yielded the highest number of fragments with the average of 15.0 among the primers used in Israeli carp. A tota1 of 294 polymorphic products in common carp and 336 in Israeli carp were observed by random primers. The average number of polymorphic products generated by random RAPD primer No. 2 (GTAGAC-CCGT) showed 8.0 in Israeli carp. On average, each random RAPD primer produced 5.4 amplified polymorphic products in common carp and 6.2 in Israeli carp. An average genetic similarity (BS value) was 0.44$\pm$0.05 within the common carp and 0.32$\pm$0.04 within the Israeli carp. The degree of similarity frequency (BS) between two carps was 0.67 as generated by the primer No. 19 (GACGGATCAG). The average level of bandsharing was 0.57$\pm$0.03 between the two carps. Accordingly, the two carp populations were genetically a little distant. The electrophoretic analysis of PCR-RAPD products showed middle levels of variation between the two carp populations. This result implies that the genetic diversity among intra-population may be higher when compared with that between the two carps. The RAPD polymorphism generated by these random primers might be used as a genetic marker for populations or lines identification in important aquacultural carp.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.196-208
• /
• 1998

To improve the quality of environmental measurements and evaluation of the workplace air in the pigment manufacturing industries, we analyzed metal(chromium, cadmium, lead, iron, cobalt, manganese, antimony, titanium, arsenic, and selenium) concentrations by ICP-AES in sixty seven samples of inorganic bulk pigments which are produced and/or used in Korea. We also collected MSDS which has to be supplied by manufacturer and/or supplier and posted in the workplace according to the Hazard Communication Standards, and compared the number of metals listed in each MSDS with the number of metals determined by ICP-AES. Results were as followed; 1. Among seventeen yellowish-colored samples, chromium(2~19%) and lead(0.1~61%) were the two major metals. In thirteen reddish-colored samples, iron was the major component with 37~81%. Cobalt and manganese were detected in blue-colored samples with less than 1%, while antimony and titanium were the major two metals in white-colored pigments with 178~300 ppm and with 36~65%, respectively. 2. In area samples collected in workplace air(one pigments producing factory and five retailer stores), iron and manganese were detected but the concentrations not exceeded the TLVs(1 and $5mg/m^3$, respectively). In three of fifteen samples, the concentrations of lead exceeded the TLV ($0.05mg/m^3$). 3. Two out of seven companies provided MSDS, and the average provision rate was 22.4%. And the coincidence rate of the number of metals referenced in MSDS and determined by ICP-AES mostly accorded, but in one sample, different metal was detected from MSDS. In summary, metals have to be concerned in evaluation of the workplace air dealing with compounds of inorganic pigments dust are cobalt, chromium, iron, manganese, lead and antimony, and these are simultaneously determined by ICP-AES. Taking this opportunity, it is needed to reinforce that the personnel is to be concerned about prevention of workers' ill health regarding to provision of MSDS.