• 한국환경보건학회지
• /
• 제27권4호
• /
• pp.15-24
• /
• 2001

The objective of this study it to evaluate the microbial safety in rapid sand filters adapted in most drinking water treatment plants. The potential pathogens to cause water quality problems Are presumed to be Giardia and Gryptosporidium. They look like particles in view of their size. It has been reported that if the number of particles (larger than 2 ${\mu}{\textrm}{m}$ in water) is less than 100 per mL and its turbidity is below 0.1 NTU, it is considered as a safe water in terms of pathogens. In order to achieve such a good water quality. filter-aids (chemicals) were added to the inlet-channel of filter and their effectiveness was evaluated on the basis of water quality factors such as turbidity and particle counting. This study was conducted in she three steps of experiment: jar test. pilot plant test and real water treatment plant test (P plant in seoul). The experiment reult of the P water treatment showed that cationic polyamine was the most effective in the removal of particles and turbidity at the does of 0.25 mg/L. The turbidity without filer-aids showed in the range of 0.12 ~0.17 NTU during filtration and 0.14 NTU on the average. However. with addition of polyamine, the turbidity represented below(or less than) 0.1 NTU after 20 min in the start of filtration and kept 0.08 NTU on the average. On the other hand, as for number of particles, while no filter-aids led to the range of 111 ~270 per mL and 190 on the average, addition of polydmine led to 113 per mL on talc average, and kept below100 per mL after 20 min in the start of filtration.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.717-730
• /
• 2016

The harmonic components of grid voltage result in oscillations of the calculated phase obtained via phase synchronization. This affects the security and stability of grid-connected converters. Moving average filter, delayed signal cancellation and their related harmonic elimination algorithms are major methods for such issues. However, all of the existing methods have their limitations in dealing with multiple harmonics issues. Furthermore, few studies have focused on a comparison and evaluation of these algorithms to achieve optimal algorithm selections in specific applications. In this paper, these algorithms are quantitatively analyzed based on the derived mathematical models. Moreover, an enhanced moving average filter and enhanced delayed signal cancellation algorithms, which are applicable for eliminating a group of selective harmonics with only one calculation block, are proposed. On this basis, both a comprehensive comparison and a quantitative evaluation of all of the aforementioned algorithms are made from several aspects, including response speed, required data storage size, sensitivity to sampling frequency, and elimination of random noise and harmonics. With the conclusions derived in this paper, better overall performance in terms of harmonic elimination can be achieved. In addition, experimental results under different conditions demonstrate the validity of this study.

• 한국멀티미디어학회논문지
• /
• 제12권9호
• /
• pp.1210-1216
• /
• 2009

본 논문에서는 순환최소순위(RLR) L-필터의 수렴성을 해석하였다. RLR L-필터는 순서통계필터로서 입력의 크기순서에 따른 가중치를 필터계수로 한다. 또한 RLR L-필터는 비선형 적응 필터로서 필터계수의 갱신을 위하여 RLR 알고리즘을 이용한다. RLR 알고리즘은 로버스트 통계학의 순위추정에 기초한 비선형 적응 알고리즘이다. 본 논문에서는 가변적인 스텝 크기를 적용하여 평균 및 평균제곱의 견지에서 수렴성을 해석하였다. RLRL-필터는 잡음의 분포함수가 두꺼운 꼬리 분포인 임펄스 잡음에 가까울수록 메디안 필터의 형태로 적응하며 가우시안 잡음의 경우 평균 필터의 형태로 적응한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제32권3호
• /
• pp.261-270
• /
• 2009

2007년 7월 1일부터 2008년 4월 30일까지 10개월간 대학병원에 내원한 1,969명의 CC촬영건수 3,900건에 대한 유방 압박($13{\sim}15\;daN$)시 두께와 평균 유선 선량(AGD)의 관계를 분석 해본 결과 다음과 같은 결론을 얻었다. 1. 전체 3,900건에 대해 연령 40대와 50대가 전체의 68.69%로 2.679건이었다. 2. 초점/필터 물질별 분포를 보면 41.0%가 Mo/Mo이었고, 34.8%는 Mo/Rh, 24.2%는 Rh/Rh이었다. 3. 초점/필터 물질 별 유방 압박 두께는 Mo/Mo 시 평균 두께 26.9 mm이며, Mo/Rh 시 38.84 mm, Rh/Rh시 48.80 mm로 전체 건수에 대한 평균 두께는 36.27 mm로 나타났다. 4. 초점/필터 물질에 따른 평균 유선 선량(AGD)은 Mo/Mo 시 평균 1.27 mGy, Mo/Rh 시 1.55 mGy, Rh/Rh 시 1.42 mGy로 전체 건수에 대한 평균 유선 선량의 평균은 1.43 mGy로 나타났다. 5. Mo/Mo 시 유방 압박 두께에 따른 평균 유선 선량의 관계는 y = 0.0318x + 0.470이며, Mo/Rh에서는 y = 0.0206x + 0.709, Rh/Rh에서는 y = 0.0248x + 0.335로 유방 압박 두께에 따라서 영향을 많이 받지만, 특히 Mo/Mo 시 유방 두께에 따라서 변화가 컸다.

• ETRI Journal
• /
• 제34권1호
• /
• pp.106-109
• /
• 2012

In this letter, we propose a new prediction block filter that can reduce errors between the original and prediction blocks. The proposed filter adaptively adjusts filter coefficients by using the previously reconstructed adjacent blocks and their prediction blocks. Then, the filter is selectively applied to the current prediction block according to the rate-distortion optimization. Moreover, since the same filter coefficients can be derived in the decoder, they are not encoded into the bit-stream. The proposed method achieves a 4.65% bitrate saving on average compared with H.264/AVC.

• 대한전자공학회논문지
• /
• 제25권3호
• /
• pp.322-326
• /
• 1988

The sigma filter is a nonlinear filter of modifying average filter to develop edge-preserving characteristics. However, this filter is yet weak to the impulsive noise such as BSC noise. Therefore it has not been used so highly in the image restoration area. In this paper, We propose an adaptive image restoration algorithm using the local statistic and the characteristic of human eyes in order to compensate its drawback and to improve its performance. The performance of the proposed algorithm and the vonventional ones are compared for images degraded by BSC noise. The proposed algorithm shows better performance than the median filter and yields 5 dB performance improvement over the convertional K-sigma filter on SNR gain.

• 재활복지공학회논문지
• /
• 제10권1호
• /
• pp.29-35
• /
• 2016

본 논문에서는 장애인보조기구에 적용하기 위한 근거리 레이더의 반사판의 각도에 따른 데이터의 노이즈에 대한 분석과 이를 제거하기 위한 휴리스틱 알고리즘과 이동평균필터를 융합한 상보필터를 제시하고 이를 적용하여 노이즈를 제거한 실험에 대한 내용을 담고 있다. 또한 칼만 필터와의 비교와 두 개를 같이 사용했을 경우 등의 실험 결과 값 비교를 통해 제안한 필터의 효용성에 대해서 증명하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.522-522
• /
• 2000

In this paper, two pre-filtering techniques are presented for accurately estimating the impact location of a loose part. The reason why a pre-filterng technique Is necessary in a Loose Part Monitoring System is that the effects of background noise on the signal to noise ratio (SNR) can be reduced considerably resulting in improved estimation accuracy. The first method is to take d moving average operation in the time domain. The second one is to adopt band-pass filters designed in the frequency domain such as a Butterworth filter, Chebyshev filter I & II and an Elliptic Filter. To show the effectiveness, the impact test data (signals) from the YGN3 power plant are first preprocessed and then used to estimate the loose pan impact position. Resultantly. we observed that SNR is much improved and the average estimation error is below 7.5%.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2125-2129
• /
• 2008

This study was the development of air-cleaner for railroad passenger car. the characteristic of air-cleaner is to improvement of in door air quality and easy of maintenance. the air-cleaner is applicated to roll filter system. advantage of roll filter is to reduce time and cost of maintenance. The developed air-cleaner was installed to the railroad passenger car, and then has fieldtested for roll filter system's performance. the result of field-test performance was average Eff. 32% that is average of several days' measurement data.

• Journal of information and communication convergence engineering
• /
• 제20권2호
• /
• pp.125-130
• /
• 2022

In modern society, as many data are used for research or commercial purposes, the value of data is gradually increasing. In related fields, research is being actively conducted to collect valuable data, but it is difficult to collect proper data because the value of collection is determined according to the performance of existing sensors. To solve this problem, a method to effectively reduce noise has been proposed, but there is a point in which performance is degraded due to damage caused by noise. In this paper, a device capable of collecting time series data was designed to correct such data noise, and a correction technique was performed by giving an error value based on the representatively collected ultrafine dust data, and then comparing before and after Compare performance. For the correction method, Kalman, LPF, Savitzky-Golay, and Moving Average filter were used. Savitzky-Golay filter and Moving Average Filter showed excellent correction rate as an experiment. Through this, the performance of the sensor can be supplemented and it is expected that data can be effectively collected.