• Transactions of Materials Processing
• /
• v.31 no.3
• /
• pp.117-123
• /
• 2022

In this study, a commercial AZ61 magnesium alloy is extruded at 300 ℃ and 400 ℃ and the microstructures, mechanical properties, and high-cycle fatigue properties of the extruded materials are investigated. Both extruded materials have a fully recrystallized microstructure with no Mg₁₇Al₁₂ precipitates. The average grain size and maximum basal texture intensity of the extruded material increase with increasing extrusion temperature. The material extruded at 400 ℃ (AZ61-400) has higher tensile yield strength and lower compressive yield strength than the material extruded at 300 ℃ (AZ61-300) because of the stronger basal texture of the former. Because of coarser grain size, the tensile elongation of AZ61-400 is lower than that of AZ61-300. Despite the differences in microstructures and tensile/compressive properties, the two extruded materials have the same fatigue strength of 110 MPa. This is because the finer grain size of AZ61-300 causes an increase in fatigue strength, but its weaker texture causes a decrease in fatigue strength. In both extruded materials, fatigue cracks initiate at the surface of fatigue specimens at all stress amplitudes tested.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.269-277
• /
• 2003

Effects of soy protein concentrate (SPC) containing isoflavone and casein diets on plasma phospholipid (PLs)-fatty acid patterns were investigated in 7-& 40- wk old female rats. Diets containing 16% SPC (soy/young:SY, soy/old: SO) and casein (casein/young : CY, casein/ old: CO) supplemented with 0.5% cholesterol were fed for 4 wks. Fatty acid compositions of plasma PLs were determined by TLC and GLC. Compared to the dietary protein effects, age effects on serum lipids were more profound. The levels of total cholesterol (Chol.), triglyceride, HDL-Chol., (LDL+VLDL)-Chol. and atherogenic index (AI) were higher in older groups (OC & OS) than younger groups (YC &. YS). Soy groups had higher Ell)L-Chol. level and lower (LDL+ VLDL)-Chol. and AI, compared with casein groups. The compositions of C22:0, Cl8:1 $\omega$9 and sum of MUFA in plasma PLs were significantly higher in casein group (CY & CO) than soy group (SY & SO), but those of sum of SFA were higher in soy group. The compositions of C22:0, Cl8:1 $\omega$9, C22:1, Cl8:3$\omega$3 and C22:4$\omega$6 were higher and those of C22:6$\omega$3, sum of $\omega$3, Cl8: 2$\omega$6 C20:4$\omega$6, sum of $\omega$6 and sum of PUFA were lower in plasma PLs of younger rats. The average P/S and $\omega$3/$\omega$6 ratio in older group was higher. The $\Delta$-7 desaturation index (16:0⇒16:1$\omega$7) and $\Delta$-9 desaturation index (18:0⇒18:1$\omega$9) were lower in soy group than casein group, while $\Delta$-6 and $\Delta$-5 desaturation index were not affected by dietary protein. The $\Delta$-4 desaturation index (22:4$\omega$6⇒22:5$\omega$6) were higher and elongation index (20:4$\omega$6⇒22:4$\omega$6) were lower in older group. The ratio of the products of $\omega$3 fatty acid series (Cl8:3) was significantly higher in older group, which indicated that age affected the plasma PUFA metabolism. On the other hand, older rats had higher serum cholesterol level compared with younger rats. Taken together, these changes in fatty acid composition might cause minimal changes in tile membrane fluidity induced by the increase serum cholesterol level.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.207-207
• /
• 2017

The proso millet is vulnerable to lodging due to high plant height and shallow root. A lodging results in a hard mechanical harvesting and yield loss. One of solutions on this problem is inhibition of internode elongation. The objective of this study was to set up use time and dose of prohexadium-calcium, is growth inhibitor. The experimental variety was Ibaekchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plots were 25 and 35 day after sowing(DAS) as use time and sub-plots were 0%, 50%, 100%(diluted solution of 1000 times, $1000{\ell}\;ha^{-1}$), 150% as dose. The amount of nitrogen, phosphate and potassium fertilization were 90, 70, $80kg\;ha^{-1}$, respectively. The size of high ridge and plant spacing were $90{\times}30cm$ and $60{\times}15cm$, respectively. Proso millet was sown on June 9, 2016 by hands and was adjusted at 2 plant per hill. The growth survey of vegetative growth stage was conducted at 1 day before treatment and with one week interval after treatment. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle or leaf in cm, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode (6) degree of lodging: percentage of lodging area, etc. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. There was a significant difference in plant height and number of stem among the use time and dose of prohexadium-calcium during vegetative growth stage. At 25 DAS, the difference with no treatment increased until 25 day after treatment and decreased since then. The difference in number of stem increased until 18 day and decreased since 25 day. At 35 DAS, the difference with no treatment in plant height and number of stem increased until 22 day after treatment and decreased since then. We assumed that the effect of prohexadium-calcium was inhibition of internode elongation and promotion of tillering, continued untel 25day after treatment. At 25 DAS, the degree of lodging deceased to 100%, 30%, 10% and 0% as dose increased. At 35 DAS, the degree of lodging decreased to 100%, 20%, 0% and 0% as dose increased. At 25 DAS, the yield was 2910, 2710, 3190, $2310kg\;ha^{-1}$ among dose. At 35 DAS, the yield was 2750, 2630, 2220, $2050kg\;ha^{-1}$. We recommend that the optimum use time and dose of prohexadium-calcium for proso millet is 1000 times diluted solution of $1000{\ell}$ per ha at 25 day after sowing.

• Journal of Adhesion and Interface
• /
• v.12 no.1
• /
• pp.16-25
• /
• 2011

Multi core-shell composite particles were prepared by the water-born emulsion polymerization of various core monomer such as methyl methacrylate (MMA), n-butyl methacrylate (BMA), and shell monomer such as MMA, BMA, stylene (St), 2-hydroxyl ethyl methacrylate (2-HEMA) and acrylic acid (AA) in the presence of different concentration of sodium dodecyl benzene sulfonate (SDBS). The following conclusions are drawn from the measured conversion, particle size and distribution, average molecular weight, molecular structure, glass transition temperature with DSC, morphology, tensile strength and elongation. In the case of the concentration of 0.02 wt% SDBS, the conversion of MMA core-(BMA/St/AA) shell composite particle was excellent as 98%. In the case of the concentration of 0.03 wt% SDBS, the particle size of BMA core-(MMA/St/AA) shell composite particle was high as $0.47{\mu}m$. We confirmed that 3 points of glass transition temperatures appear for multi core-shell composite particles compared to 2 points of glass transition temperatures appear for general core-shell composite particles. We showed that it is possible to adjust glass transition temperatures according to the kind and composition of the inner shell monomer that it is can be used as a adhesive binder material with improved adhesive power.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.18 no.1
• /
• pp.1-10
• /
• 1982

Diffusion processes in tidal swinging coastal waters are studied by releasing one hundred liters of Rhodamine B four times. Dye patches were formed from instantaneous point sources. The patches were sampled with a pump on a tracking boat, and samples were analyzed with fluorospectro-photometer. The patterns of patches were reconstructed and their characteristics were analyzed in terms of variance of concentration, area estimation, and decrease rate of peak concentration. In all of the four experiments, the dye patches were mos시 elongated to the direction of current axis. the elongation rate was 0.34 on the average. Apparent diffusivities were 620 to 3,000 cm super(2) /sec during initial period of 90 minutes. The variance increased by exp(0.047t) on the average, and peak concentration deceased by exp(-0.044t) on the average.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.132-137
• /
• 2006

Polyurethane acrylate hybrid emulsions were prepared by seeded polymerization techniques. In the synthesis, seeded polyurethane dispersion containing a carboxylic group was used to endow hydrophilicity to the hybrid emulsion and various acrylates such as methyl methacrylate (MMA), 2-hydroxy ethylmethacrylate (2-HEMA), n-butyl acrylate (n-BA) and acrylic acid (AAc) were used to endow hydrophobicity. The particle size and distribution of various emulsion particles such as polyurethane acrylate hybrid emulsion, polyurethane dispersion homopolymer, acrylate emulsion, and physical blending emulsion were measured by a particle size analyzer. The average particle size of hybrid emulsion was greater than physical blending emulsion. And tensile strength, 100% modulus, elongation, and swelling properties of the polyurethane acrylate hybrid emulsion were studied and compared with those of polyurethane homopolymer, acrylate emulsion, and physically blended compositor, respectively. To improve chemical and physical resistance, this paper review a melamine hardener and compares it for effects on the physical properties of cured coating.

• Plant Biotechnology Reports
• /
• v.5 no.2
• /
• pp.147-156
• /
• 2011

Efficient Agrobacterium-mediated genetic transformation of Scoparia dulcis L. was developed using Agrobacterium tumefaciens strain LBA4404 harboring the binary vector pCAMBIA1301 with ${\beta}$-glucuronidase (GUS) (uidA) and hygromycin phosphotransferase (hpt) genes. Two-day precultured leaf segments of in vitro shoot culture were found to be suitable for cocultivation with the Agrobacterium strain, and acetosyringone was able to promote the transformation process. After selection on shoot organogenesis medium with appropriate concentrations of hygromycin and carbenicillin, adventitious shoots were developed on elongation medium by twice subculturing under the same selection scheme. The elongated hygromycin-resistant shoots were subsequently rooted on the MS medium supplemented with $1mg\;l^{-1}$ indole-3-butyric acid and $15mg\;l^{-1}$ hygromycin. Successful transformation was confirmed by PCR analysis using uidA- and hpt-specific primers and monitored by histochemical assay for ${\beta}$-GUS activity during shoot organogenesis. Integration of hpt gene into the genome of transgenic plants was also verified by Southern blot analysis. High transformation efficiency at a rate of 54.6% with an average of $3.9{\pm}0.39$ transgenic plantlets per explant was achieved in the present transformation system. It took only 2-3 months from seed germination to positive transformants transplanted to soil. Therefore, an efficient and fast genetic transformation system was developed for S. dulcis using an Agrobacterium-mediated approach and plant regeneration via shoot organogenesis, which provides a useful platform for future genetic engineering studies in this medicinally important plant.

• Journal of Plant Biotechnology
• /
• v.34 no.3
• /
• pp.189-195
• /
• 2007

Helicteres isora is medicinally important plant effective against asthma, diabetes, hypolipidemia, HIV, besides a good source of diosgenin. Seed dormancy and low rate of natural fruit production make this plant a perfect candidate for developing an in vitro method useful for its clonal propagation and further biotechnological developments. This is the first report on in vitro production of this plant. Nodal explants obtained from aseptically germinated seedlings were cultured on MS medium (Murashige and Skoog 1962) fortified with indole-3-acetic acid (IAA) ($0.57-22.83\;{\mu}M$), indole-3-butyric acid (IBA) ($0.41-16.58\;{\mu}M$), 6-benzylaminopurine (BA) ($0.44-17.75\;{\mu}M$) and kinetin (Kin) ($0.46-13.94\;{\mu}M$) either singly or in combinations of IAA + BA, IAA + Kin and BA + Kin. Combinations of cytokinins (BA and Kin) were most suitable for multiple shoot induction and $13.94\;{\mu}M\;Kin\;+\;13.31\;{\mu}M\;BA$ was optimum (79% frequency) associated with high number of microshoots (7.1 shoots per explant) after 20 days of culture. Maximum shoot elongation and proliferation (10 shoots per explant with 4.8 cm average height) was achieved on MS media containing $2.32\;{\mu}M\;Kin\;+\;2.22\;{\mu}M\;BA\;+\;2.85\;{\mu}M\;IAA$. High rooting frequency (70%) was achieved on MS medium (1/2 basal strength) fortified with $4.14\;{\mu}M$ IBA, while activated charcoal showed inhibitory effects on rooting. Hardening was done with 76% survival rate and these plants were growing without any visual defects and morphologically mimicking the naturally growing plants.

• Tunnel and Underground Space
• /
• v.26 no.5
• /
• pp.441-453
• /
• 2016

This study aimed to develop a two-component TSL suitable for reducing dust and guaranteeing homogeneous qualities during its spraying. Its performance was evaluated by a series of laboratory and field tests. High ductility of two-component TSL prototypes resulted in increasing their elongation at break even though their tensile strengths were slightly lower than those of one-component powder TSLs. One prototype of the two-component TSLs developed in this study was verified to satisfy every criterion specified by EFNARC (2008). Especially, it increased the average compressive strength of mortar specimens by 50% even when it coated them only with the thickness of 3 mm. From a preliminary spraying test, a spraying machine suitable for the developed TSL prototype was derived and modified. After its field application, dust and rebound generated during its spraying works were found to be very minimal. Its spraying rate was recorded to be approximately $60m^2/hr$. In addition, it showed a very rapid hardening characteristic compared with general sprayable waterproofing membranes.

• Reproductive and Developmental Biology
• /
• v.38 no.3
• /
• pp.107-114
• /
• 2014

Oral exposure of humans by excess amounts of arsenic may cause disturbances of the reproductive system. In the present study, such exposure was modelled in rats, with the support of sperm principal parameters and histopathological observations. Male Sprague-Dawley rats were randomly divided into three groups where the group I was served as a normal control, group II was received sodium meta-arsenite as arsenic (10 mg/kg b.w/day) and a combination of sodium meta-arsenite and sodium selenite (3 mg/kg b.w/day) in group III. After 6 weeks, there was no significant change in testis weight and in total motility of all the three experimental groups, whereas, rapid moving spermatozoa, moderately moving spermatozoa and slow moving spermatozoa were significantly decreased in arsenic treated rats as compared to control rats. The other sperm principal parameters like progressiveness, average path velocity, straightness linear velocity (VSL), curvilinear velocity (VCL), straightness, linearity sperm head elongation ratio, area, linearity amplitude of lateral head department (ALH) and beat cross frequency (BCF) were found to be reduced in arsenic intoxicated rats. These results are not correlated with the histological studies. On oral administration of selenium ameliorated the adverse effects of arsenic as compared to arsenic alone treated rats. Our findings clearly demonstrate that administration of selenium could prevent some of the deleterious effects of arsenic in the testis.