• 한국소음진동공학회논문집
• /
• 제16권2호
• /
• pp.207-213
• /
• 2006

In our previous research, we proposed a robust saturation controller which involves both control input saturation and structured real parameter uncertainties. This controller can analytically prescribed the upper and lower bounds of parameter uncertainties, and guarantee the closed-loop robust stability of the system in the presence of actuator's saturation. And the availability and the effectiveness of the proposed robust saturation controller were verified through numerical simulations. In this paper, we verify the robust stability of this controller through experimental tests. Expecially, we show unstable cases of other controllers in comparison with this controller. Experimental tests are carried out in the laboratory using a two-story test structure with a hydraulic-type active mass damper.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1997년도 추계학술대회 발표논문집:21세기를 향한 정보통신 기술의 전망
• /
• pp.417-433
• /
• 1997

A real-time operating system has focused primary on techniques to minimize processing time, with a secondary emphasis on system reliability issues. Conversely, fault-tolerant system has concentrated on using recourse and information redundancy to maximize the availability and reliability of the system, with a lesser emphasis on performance. We have developed a fault-tolerant and real-time operations system which support a powerful concurrent runtime environment under the above requirements. In this paper, we present an overview of real-time systems, design and implementation of a duplex architecture using advanced concepts and technologies such as fast " fault detection", "fault isolation" and "fault recovery" Because the duplex architecture has two dentical hardware elements and has several recovery steps and hierarchy to facilitate a fast recovery which must be proceeded by a prompt fault detection and isolation. Thus it makes possible to minimize the overhead of the systems including hardware and software and guarantee the service continuity of he systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.315-318
• /
• 2003

This paper proposes a switching control method applicable to any affine, 2nd order nonlinear system with single input. The key contribution is to develop a control design method which uses a piecewise continuous Lyapunov function non-increasing at every discontinuous point. The proposed design method requires no restrictions except full state availability. To obtain a non-increasing, piecewise continuous Lyapunov function, we change the sign of off-diagonal term s of the positive definite matrix composing the former Lyapunov function according to the sign of the Inter-connection term. And we use the solution of inequalities which guarantee each Lyapunov function is non-increasing at any discontinuous point.

• 대한인간공학회지
• /
• 제12권1호
• /
• pp.17-24
• /
• 1993

Today, rapid development and timeliness of introducing a new product be- comes a more influencing factor of determing its competitive power due to a shortened product cycle, while rapid improvement of manufacturing technology makes product design and manufacturing fuse together. This implies that prod- uct usability evaluation and improvement starts right from its design phase, resulting in less development time and cost. To make this possible, proper as- sessment of human reach is one of essential functions for ergonomic product us- ability evaluation, specifically in the platform of computer-aided ergonomic evaluation models or any CAD system with a built-in man model. In this study, an analytic reach prediction algorithm ensuring the posture that human naturally takes, is presented by employing the methods developed for robot kinematics. Among robot kinematic methods for solving the multi-link system, the resolved motion method was found to be effective to solve human reach as a redundant manipulator model. Also, the joint range availability was used as a performance fonction to guarantee human naturalness. The result is expected to be directly applicable to product usability evaluations.

• ETRI Journal
• /
• 제37권3호
• /
• pp.512-522
• /
• 2015

Recent developments in identity-based cryptography (IBC) have provided new solutions to problems related to the security of mobile ad hoc networks (MANETs). Although many proposals to solve problems related to the security of MANETs are suggested by the research community, there is no one solution that fits all. The interdependency cycle between secure routing and security services makes the use of IBC in MANETs very challenging. In this paper, two novel methods are proposed to eliminate the need for this cycle. One of these methods utilizes a key pool to secure routes for the distribution of cryptographic materials, while the other adopts a pairing-based key agreement method. Furthermore, our proposed methods utilize threshold cryptography for shared secret and private key generation to eliminate the "single point of failure" and distribute cryptographic services among network nodes. These characteristics guarantee high levels of availability and scalability for the proposed methods. To illustrate the effectiveness and capabilities of the proposed methods, they are simulated and compared against the performance of existing methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.519-524
• /
• 1998

This paper presents a robust control scheme of free-joint manipulators to overcome actuator failures and uncertain-ties in Cartesian space where tasks are planned. The control scheme has the adaptation law for the upper bound on the norm of uncertainties through the Lyapunov function approach. To solve the dynamic singularity problem in the controller, the singular and nonsingular regions are investigated based on a computer simulation. Then a singularity-free Cartesian trajectory planning is achieved in order to guarantee the availability of the control scheme. To illustrate the validity of the proposed control scheme, simulation results for a three-link planar robot arm with a free joint are shown.

• 산업경영시스템학회지
• /
• 제18권36호
• /
• pp.371-377
• /
• 1995

Modern combat (or commertial) aircraft systems consist of a large number of sophisticated and complex avionics/electronics subsystems. The US Air Force of Productivity, Reliability, Availability and Maintainability (PRAM) reports that 25 to 45 percent of aircraft system failures in the electronics or electromechanical area 〔Kachmar, 1985〕. It is an important issue to achive the required reliability and maintainability for avionics/electronics subsystems in order to guarantee the mission success during the life cycle in a timely and cost effective manner. The issuance of USAF Mil-A-87244, "Avionics/Electronic Integrity Program requirements," 1987 demands a new approach called "Avionics/Electronics Integrity Program" (AVIP). The objective of this paper is to give a tutorial presentation on the basic aspects of Avionics/Electronics Integrity efforts in relation to total quality management of avionics/electronics whose performance measures are expressed in terms of reliability, durability, and matainability.

• Journal of Communications and Networks
• /
• 제6권2호
• /
• pp.163-172
• /
• 2004

Ultra Wide Bandwidth (UWB) spread-spectrum techniques will playa key role in short range wireless connectivity supporting high bit rates availability and low power consumption. UWB can be used in the design of wireless local and personal area networks providing advanced integrated multimedia services to nomadic users within hot-spot areas. Thus the assessment of the possible interference caused by UWB devices on already existing narrowband and wideband systems is fundamental to ensure nonconflicting coexistence and, therefore, to guarantee acceptance of UWB technology worldwide. In this paper, we study the coexistence issues between an indoor UWB-based system (hot-spot) and outdoor point to point (PP) links and Fixed Wireless Access (FWA) systems operating in the 3.5 - 5.0 GHz frequency range. We consider a realistic UWB master/slave system architecture and we show through computer simulation, that in all practical cases UWB system can coexist with PP and FWA without causing any dangerous interference.

• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.733-743
• /
• 2017

This paper develops a coordinated control strategy of the doubly fed induction generator (DFIG) system based on repetitive control (RC) under generalized harmonic grid voltage conditions. The proposed RC strategy in the rotor side converter (RSC) is capable of ensuring smooth DFIG electromagnetic torque that will enable the possible safe functioning of the mechanical components, such as gear box and bearing. Moreover, the proposed RC strategy in the grid side converter (GSC) aims to achieve sinusoidal overall currents of the DFIG system injected into the network to guarantee satisfactory power quality. The dc-link voltage fluctuation under the proposed control target is theoretically analyzed. Influence of limited converter capacity on the controllable area has also been studied. A laboratory test platform has been constructed, and the experimental results validate the availability of the proposed RC strategy for the DFIG system under generalized harmonic grid voltage conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.223-226
• /
• 2005

In previous research, we proposed robust saturation controller which involves both actuator's saturation and structured real parameter uncertainties. This controller can analytically prescribed the upper and lower bounds of parameter uncertainties, and guarantee the closed-loop robust stability of the system in the presence of actuator's saturation. And the availability and the effectiveness of the proposed robust saturation controller were verified through numerical simulations. In this paper, we verify the robust stability of this controller through experimental tests. Especially, we show unstable cases of other controllers in comparison with this controller. Experimental tests are carried out in the laboratory using a two-story test structure with a hydraulic-type active mass damper.