• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.282-290
• /
• 2014

This paper presents the design of embedded electrical power control unit for Personal Electrical Vehicle(PEV). The embedded unit is designed using PIC18F8720 processor, 16Mb flash ROM, 32Mb SDRAM and signal condition circuits. The proposed PEV consists of 4KW in-wheel Brushless DC Motor(BLDCM), 3 phase voltage source inverter with the $180^{\circ}$ conduction space vector PWM method, PID speed controller and the embedded control unit. The PEV has mechanical manufacture of inverse 3 wheel system, which is applied by the in-wheel BLDCM and steering mechanism with tilting function. Also, the performances of the proposed embedded electrical power control unit are verified through the lab experiment and road driving test of PEV.

• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.147-150
• /
• 2011

Since their discovery in the early 1980's, the market for bonded rare earth magnets has shown steady growth. Today these magnets are widely used for our daily life such as computer peripherals, automotive, consumer electronics, and office automation. However, the price increases of rare-earths started from the $2^{nd}$ half of 2010 became even worse in 2011. During $2^{nd}$ quarter of 2011, almost all of rare-earths showed unprecedented vertical price increases, and it brought significant impact to the related industry in terms of the price and supply. This will ask the fundamental change in the policy of the bonded rare earth industry to expand its market share, which has been highly dependent on the replacement of ferrite magnets via relatively higher performance compared to the price at certain applications. In order to achieve the sustainable growth of bonded rare-earth magnets in the future, it needs to change the current paradigm and setup the new business model. This article includes a brief summary of the rare earth price trend and the applications of the rare-earth bonded magnets. The efforts to improve the performance and diversify the applications for future growth have been also presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.269-274
• /
• 2016

This paper proposes the development of a low frequency electronic hammer drive system that is used to prevent scaling or clogging in the hopper process. The electro-mechanical hammering driving method involves the generation of vibration and impact energy. The operation principles of the electromagnetic hammer were considered by parallel/series spring coefficient analysis and the amount of kinetic energy generated was calculated from the product of the equivalent spring constant, which is coupled with the E core and the gap of between the E core and I core. In addition, the Pulsation Driving algorithm was applied to the proposed electromagnetic hammer to obtain the maximizing kinetic energy. This algorithm was then implemented by a logical AND operation process and micro-controller (atmega128) built in functions with a timer interrupt and PWM generation function. The driving circuit of the electromagnetic hammer was designed using the H-bridge type IGBT circuit. The experimental test was performed by usefulness of the developed electromagnetic hammer systems with the acceleration measurement method. The experimental result showed that the proposed system has good kinetic energy generation performance and can be applied to the hopper process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6289-6295
• /
• 2014

Rework systems are the equipment used to install or remove semiconductor chips with BGA or SMD forms in printed circuit boards. The rework systems have hot air outlets. At the outlets, precise temperature control is needed to avoid heat shock. The aim of this paper was to suggest a new controller for temperature control at the hot air outlets. The suggested controller was a fuzzy PID controller. The fuzzy PID controllers were composed of TSK fuzzy rules and had outstanding ability for nonlinear systems control. This paper reports the design algorithm of fuzzy PID controllers, and the design process of the fuzzy PID controller for the temperature control of the outlets. Temperature control experiments were performed to verify the ability of the suggested controller. As a result, the RMS of the proposed method is 9.44 and the general method is 15.88. The experiments showed that the temperatures at the outlet using the suggested fuzzy PID controller followed the desired ones better than the commonly used PID controller.

• Information Systems Review
• /
• v.17 no.3
• /
• pp.113-133
• /
• 2015

In this paper, DEA analysis is employed to compare and evaluate the relative efficiency of a business intelligence (BI) system among five industrial groups such as IT and financial services, electricity and electronics, energy and chemistry, automotive and heavy machinery, and food and apparel. Especially, this study has analyzed the improving tendency of relative efficiency of the industrial groups since they adopted the BI System using Time-Window Analysis. The research findings show that the energy and chemical industry group tends to be remarkably more efficient than the other groups and the electrical and electronic industry turns out to gradually improve their efficiency since the adoption of the BI system.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.81-86
• /
• 2011

Without a special mineral resources in Korea, such as petrochemical industries, electronics and automotive industries to supply the basic material, but remains a key industry locations. Gongjeongsang dealing with hazardous materials, such as a fire or explosion hazard, and from this site sangjonhae safety regulations to protect human and material disaster prevention activities are focused. However, depending on the actual implementation of standardized safety regulations as necessary if not originally intended, proper objectivity and reliability of safety regulations, as well as impaired resulting in a waste of public and private administrative power and petrochemical industries and the competitiveness of the entire drop factor will. Accordingly, this study petrochemical plant is applied to a representative safety regulations, items for their safety are needed and these regulations as being implemented that was identified, according to a study, some of the need for regulation and implementation both in terms of reliability was low.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.144-155
• /
• 2019

One of the issues of the automotive industry today is autonomous driving vehicles. In order to achieve level 3 or higher as defined by SAE International, harmonization of autonomous driving technology and connected technology is essential. Current vehicles have new features such as autonomous driving, which not only increases the number of electrical components, but also the amount and complexity of software. As a result, the attack surface, which is the access point of attack, is widening, and software security vulnerabilities are also increasing. However, the reality is that the essential security requirements for vehicles are not defined. In this paper, based on real attacks and vulnerability cases and trends, we identify the assets in the in-vehicle network and derive the threats. We also defined the security requirements and derived essential security requirements that should be applied at least to the safety of the vehicle occupant through risk analysis.

• Journal of Korea Multimedia Society
• /
• v.22 no.5
• /
• pp.613-625
• /
• 2019

The rise of the Internet of Things (IoT) devices have greatly influenced many industries and one of them is healthcare where wearable devices started to track all your daily activities for better health monitoring accuracy and even down to tracking daily food intake in some cases. With the amounts of data that are being tracked and shared between from these devices, questions were raised on how to uphold user's data privacy when data is shared between these IoT devices and third party. With the blockchain platforms started to mature since its inception, the technology can be implemented according to a variety of use case scenarios. In this paper, we present a system architecture based on the healthcare system and IoT network by leveraging on multiple blockchain networks as the medium in between that should enable users to have direct authority on data accessibility of their shared data. We provide proof of concept implementation and highlight the results from our testing to show how the efficiency and scalability of the healthcare system improved without having a significant impact on the performance of the Electronic Medical Record (EMR) that mostly affected by the previous solution since these solutions directly connected to a public blockchain network and which resulted in significant delays and high cost of operation when a large amount of data or complicated functions are involved.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.82-87
• /
• 2019

Recently, plastic materials have become more diversified, and the development of materials with excellent mechanical properties and plasticity has enabled wider application, miniaturization, and refinement of injection molded products. As a result, the utilization of these products in household goods, electronics, automotive parts, and aircraft parts is increasing in almost all industries. Injection molded parts are often used externally on finished commercial products. This means that the injection mold industry is very important to the value of these products. For this reason, the industry is performing research on the precision and efficiency of the injection molding process. In this study, we investigated the applicability of the core in core cooling method to the problem of product deformation due to temperature variation in existing injection mold designs. We also characterized the cooling performance of an injection mold when using this cooling method.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.30-34
• /
• 2021

Electrical failures and reliability problems of electronic components by ionic migration between adjacent device terminals have become an issue in automotive electronics. Especially unlike galvanic corrosion, ionic migration is occurred at high temperature and high humidity under applied electric field condition. Until now, although extensive studies of the ionic migrations dealing with PCBs, electrodes, and solders were reported, there is no study on the effect of insulation polymers and metallic fillers for ionic migration. In this research, therefore, ionic migration induced by the types and contents of polymers and metallic fillers, and variety conditions of temperature, humidity, and applied voltage was studied in detail. Ester and amide types of liquid crystal polymer (LCP) and poly (phthalamide) (PPA) were used as base polymers, respectively and compounded with the metallic fillers of Copper iodide (CuI), Zinc stearate (Zn-st), or Calcium stearate (Ca-st) in various compositions. The compounding polymers were fabricated in IPC-B-24 of SIR test coupon according to ISO 9455-17 with Cu electrodes for ionic migration test. While there is no change in LCP-based samples, ionic migration in PPA compounding sample with a high water absorption property was accelerated in the presence of 0.25 wt% or above of CuI at the environmental conditions of 85℃, 85% RH and 48V. The dendritic short-circuit growth of Cu caused by ionic migration between the electrodes on the surface of compounded polymers was systematically observed and analyzed by using optical microscopy and SEM (EDX).