• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.248-251
• /
• 2014

As more vehicles become equipped with advanced electronic control systems, more consideration is needed with regards to automotive safety issues related to the effects of electromagnetic waves. Unwanted electromagnetic waves from the antenna, electricity and other electronic devices cause the performance and safety problem of automotive components. In general, Power Integrity and Signal Integrity analysis have been widely used, but these analyses have stayed PCB level. PCB base analysis is different from radiated emission TEST condition so its results are used just for reference. This paper proposes EMC optimization technology using module level 3-dimensional radiation simulation process closed to fundamental test conditions. If module level EMC analysis, which is proposed in this study, is applied to all automotive electronics systems, unexpected EMC noise will be prevented.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.143-147
• /
• 2014

The ECU which is operating inductive actuator like motor or solenoid should be designed with considering the heat removal performance and the EMC performance. In most cases, these two performances are trade-off. Especially, the metal cover with plastic housing for improving heat removal performance can affect EMC performance by coupling the noise source to harness cable and connector. Therefore, after analyzing the EMC effectiveness of the metal cover, countermeasures for EMC noise reduction should be established. In this paper, by simulating and testing of AHB Gen3 ECU, the influence of the metal cover to EMC performance is analyzed. And based on this result, we propose solutions for EMC noise reduction.

• 한국ITS학회 논문지
• /
• 제19권3호
• /
• pp.137-147
• /
• 2020

본 논문에서는 5G 이동통신 주파수 대역에서 자동차 전장품 전자기파 내성 평가를 위한 3 ~ 5 GHz 광대역 특성의 인쇄형 bow-tie 안테나를 제안하였다. 제안된 안테나는 2.75 ~ 6 GHz 주파수 대역에서 -10 dB 대역폭을 만족하였고, 공진 주파수 대역에서 S₁₁ 특성이 -16.2 dB 이하의 특성을 보이면서 방사 패턴은 broadside한 형태를 얻었다. 또한, 실제 5G 이동통신 주파수 대역에서의 전자기파 내성 평가를 수행함에 있어서도, 국제 표준에서 규제하는 VSWR 특성이 2.1 이하의 특성을 유지하면서도 기준 레벨인 1 W의 레벨을 문제없이 형성하였다. 이러한 결과를 통하여, 제안된 안테나는 5G 이동통신 주파수 대역에서 전자기파 내성 검증을 위한 평가용 안테나로 적용할 수 있음을 확인하였다.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.506-509
• /
• 2018

최근 전장 시스템에서 부품의 개수와 주파수가 급증함에 따라 전자파에 의해 오동작이 발생하는 전자파 간섭(EMI: electromagnetic interference)이 자주 발생하고 있다. 본 논문에서는 EMI 필터, EMI 차폐 물질, 분산 스펙트럼 클록 등 다양한 전자파 적합성(EMC: electromagnetic compatibility) 대응 기술을 살펴보고 각 기술의 장단점에 대해 설명한다.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.235-240
• /
• 2009

In automobile, the introduction of electronically commutated motors has been accompanied by a proliferation of electronic devices. With this proliferation of electronic devices, an emphasis has been placed on EMC issues. This paper is proposed to use SRM as a radiator cooling fan in automotive applications. To drive SRM, Energy efficient C-dump converter is applied. Energy efficient C-dump converter, derived from the conventional C-dump converter, is proposed as a switched reluctance motor (SRM) drive for automotive engine cooling application. It is verified more efficient than other converters through simulation and experiments. And also SRM is valid for automotive applications that have strict EMC standards. Simulation and experimental results obtained on a laboratory prototype are finally presented to evaluate the performance.

• 전기전자학회논문지
• /
• 제25권4호
• /
• pp.591-597
• /
• 2021

본 논문에서는 전자파 방출을 줄이기 위해 필터나 디커플링 캐패시터를 사용하는 대신에 PCB 내의 칩 배치, 배선 모양 등을 변경하여 위험신호의 배선 길이와 귀환경로를 짧게 하는 EMC 고려 PCB 설계 기법을 제안하였다. 제안하는 기법에서는 PCB 상의 여러 가지 신호에 대해 신호속도를 계산하고, 신호속도가 가장 높은 위험신호에 대해 선로를 가능한 짧게 하도록 가장 먼저 칩의 위치를 선정하고 배선도 가장 먼저 수행해야 한다. 또 위험신호의 귀환경로에 불연속이 발생하지 않도록 설계하며 귀환경로의 기준이 되는 전원판과 접지판이 분할되어 있지 않도록 한다. CISPR-32, CISPR-25 등의 전자파 적합성 시험을 통과하지 못했던 차량용 블루투스 지향성 스피커에 이 기법을 적용하여 PCB를 재설계한 후 EMC 측정을 수행하였더니 해당 전자파 적합성 시험을 수월하게 통과할 수 있었다. 제안하는 기법은 EMC 특성이 중요한 전자기기에 유용하게 쓰일 수 있다.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.84-91
• /
• 2010

Owing to revolutionary developments in automobile technologies, a variety of advanced vehicles - hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc. - emerges recently. The safety is getting more important for developing automobiles. The electro-magnetic compatibility has to be assured, since those advanced vehicles are equipped with various new electronic systems. Electro-magnetic compatibility tests, in general, consist of an EMI(electro-magnetic interference) test and an EMS (electro-magnetic susceptibility) test. We investigated the susceptibility test method suggested in KMVSS (Korean Motor Vehicle Safety Standard) as the EMS test method. A series of experiments results that the above test method should be partially revised to comply with a Korean governmental standard method. In this paper, the some directions of modifications are presented to enhance the quality of the above EMS test method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.949-953
• /
• 2004

In automobile, the introduction of electronically commutated motors has been accompanied by a proliferation of electronic devices. With this proliferation of electronic devices, an emphasis has been placed on EMC issues. This paper is proposed to use SRM as a radiator cooling fan in automotive applications. To drive SRM, Energy efficient C-dump converter is applied. It is verified more efficient than other converters through simulation and experiments. And also SRM is valid automotive applications that have strict EMC standards. It is compared SRM with BLDC and DC motor by experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.866-871
• /
• 2003

In automobile, the introduction of electronically commutated motors has been accompanied by a proliferation of electronic devices. With this proliferation of electronic devices, an emphasis has been placed on EMC issues. This paper is proposed to use SRM as a radiator cooling fan in automotive applications. To drive SRM, Energy efficient C-dump converter is applied. It is verified more efficient than other converters through simulation and experiments. And also SRM is valid automotive applications that have strict EMC standards. It is compared SRM with BLDC and DC motor by experiments.

• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.868-874
• /
• 2011

본 논문은 분해능이 향상된 인덕티브 방식 토크 센서의 새로운 구조를 제안한다. 토크 센서의 결합 구조와 수신 코일의 감김 수를 변화시켜 분해능을 증가시켰다. 이 토크 센서는 비접촉식으로 마모가 없기 때문에 내구성이 높으며, 진동이나 기구의 비틀림 등에 의한 편차가 적고, EMC(Electromagnetic Compatibility) 및 온도 특성이 우수하다.