• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.363-368
• /
• 2002

An automobile hub is composed of a hollow cylindrical part with inner and outer diameters. These hub diameters must be precise, as any irregularities in them (diameters) can influence/degrade the motion of an automobile with this problem. Highly accurate and reliable hub inner and outer diameters measurement systems are therefore required for inspection of the diameters. In this research, an automobile hub inner and outer diameters measurement system has been developed and tested. The system consists of measuring heads with LVDT sensors, and associated software for automatic measurement and calibration of the diameters and the sensors respectively. The system has been evaluated in comparison with an existing measurement system, and the following outcomes have been achieved; .Improved and guaranteed quality and reliability .Increased productivity and cost reduction. These results prove the system developed in this research to be suitable for automobile hub inspection.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.1-8
• /
• 2013

Remanufacturing of automobile parts is important for increasing the recycling resources. ECU(Electronic Control Unit) systems are becoming an increasingly important part of an automobile. But production company are reported in the ECU remanufacturing industry of domestic automobile parts due to a lack of remanufacturing technology and marketability. This paper introduces the ECU of remanufacturing, also grasps the structure and the analyzes failure cause that is external factors and fault in the characteristic design and steps in the Independent ECU remanufacturing process. The ECU manufacturing industry of the US was examined. The results in this paper could be used as the system information for further remanufacturing industry of domestic automobile parts.

• Journal of Computational Design and Engineering
• /
• 제2권1호
• /
• pp.55-66
• /
• 2015

To satisfy safety regulations of Economic Commission for Europe (ECE), the surface regions of automobile parts must have a sufficient degree of roundness if there is any chance that they could contact a sphere of 50.0 mm radius (exterior parts) or 82.5 mm radius (interior parts). In this paper, a new offset-based method is developed to automatically detect the possible sphere-contacting shape of such parts. A polyhedral model that precisely approximates the part shape is given as input, and the offset shape of the model is obtained as the Boolean union of the expanded shapes of all surface triangles. We adopt a triple-dexel representation of the 3D model to enable stable and precise Boolean union computations. To accelerate the dexel operations in these Boolean computations, a new parallel processing method with a pseudo-list structure and axis-aligned bounding box is developed. The possible sphere-contacting shape of the part surface is then extracted from the offset shape as a set of points or a set of polygons.

• 대한안전경영과학회지
• /
• 제13권2호
• /
• pp.83-90
• /
• 2011

It has been very important to have an exact evaluation for risk factors in order to prevent WMSDs(Work-related Musculoskeletal Disorders). However, most WMSDs evaluation methods have always been some problems of possibilities associated with subjective evaluation. Therefore, this study tried to conduct a sort of usability analysis on three major evaluation methods(OWAS, RULA, REBA). Specifically, major subjects in the study consisted of three parts as follows; comparison of the results between experienced and inexperienced observers, analysis for the consistency of the results in terms of different evaluation times, and analysis for the consistency of the results in terms of different job characteristics(based on the part of the automobile). The results of the study were summarized as follows; 1) There was statistically significant difference of the results by RULA and by REBA between experienced and inexperienced observers. This might be due to the fact that experienced observers have had better ability to detect the important working posture during evaluation. However, the results by OWAS did not give any significantly different results between experienced and inexperienced observers, 2) All three checklists applied by experienced subjects did not show any single result significantly different in terms of different evaluation times. This might have to do with high intra-observer reliability from some of previous studies, 3) The five parts of an automobile were selected as five major jobs with different job characteristics in the automobile industry. Specifically, they were door part, front part(hood, etc.), inside part(dash board, seats, etc.), rear part(trunk etc.), and bottom part. All three methods did not show any significant differences for the results from each observers. Further study on this subject would eventually provide a sophisticated evaluating guidelines for WMSDs regarding determination of observer-specific evaluation, identification of repetitive number of evaluations for stable results for each checklist, determination of job-specific evaluation methods, and so on.

• 한국중재학회지:중재연구
• /
• 제30권4호
• /
• pp.71-94
• /
• 2020

When a dispute or conflict occurs, standard methods for resolving them include resolution by trial or resolutions outside of courts. An alternative dispute resolution method called ADR that aims at remedying disputes instead of filing lawsuits is used commonly throughout the world, including the US and China. ADR, which is a remedy method outside of courts, includes negotiation, arbitration, or mediation between the concerned parties, and the arbitration system has several advantages. The Lemon Law is a consumer protection law of the United States that was enacted in 1975. This law prescribes that when specified quality standards are not met repeatedly due to defects in vehicles or electronic products, the manufacturer must provide exchanges or refunds to consumers. Korea also enacted a newly revised automobile management act, the Korea "Lemon Law," on January 1, 2019, which allows consumers to receive exchanges or refunds from the manufacturer if the same malfunction repeatedly occurs after purchasing a new automobile. There have recently been many cases of large fires occurring while driving import vehicles, causing huge public rage; therefore, interest is being focused on the revised automobile management act. Part 5-2 of the automobile management act was newly added to implement automobile exchange or refund arbitration systems. It is desirable to utilize the arbitration system to smoothly resolve automobile-related disputes that have recently increased significantly, and it is thus being used frequently for practical purposes.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.50-56
• /
• 2011

Injection molding process is one of the popular manufacturing methods to produce plastic parts with high efficiency and low cost. Ball seat for automobile suspension is made by an injection molding process as a part to support pivot function of ball joint consisted of ball stud and housing. It is necessary for a ball seat to have a dimensional stability in the three dimensional inner area to be contacted with ball stud. In this paper, the dimensional stability of inner surface is indirectly analyzed by checking the difference of inner diameter around the circumferential direction and the thickness variation at the top part of ball seat. Measurement was performed by using the coordinate measuring machine and the fixture to hold ball seat. Optimization of injection molding processes such as injection time, cooling time and temperatures of cylinder barrel was derived to reduce the difference of inner diameter and the thickness variation at the top part of ball seat based on the Taguchi method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.103-108
• /
• 2002

The gas injection molding technique(GIT) is a special injection molding process and has been an established and acknowledged process technique for many years. GIT has proved successful in cases where warpage has to be minimized, sink marks avoided and material input reduced. The classic field of application for GIT, however, is the production of thick-walled, rod shaped parts or hollow articles. Through this application, the handle part for automobile is molded and this part is consequently used as a insert for the additional injection molding process encapsulated with PVC.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.132-144
• /
• 1999

In this study, the complexity of the product was evaluated quantitatively considering the product structure, assembly process and disassembly process. To evaluate the complexity of the product, subassemblies of automobile were analyzed and then characteristics of part and subassembly were determined according to product structure, assembly process and disassembly process. Evaluation criteria of complexity were determined considering each characteristics of part and subassembly. Experiential evaluation was accomplished by classified evaluation criteria and time-motion evaluation was accomplished by the relational motion factor with characteristics of part and subassembly in MTM(Methods Time Measurement) and WF(Work Factor). The total complexity of product was determined by experiential evaluation and time-motion evaluation.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1998년도 춘계학술대회논문집
• /
• pp.31-35
• /
• 1998

Many reaearchers have reproted that poor body postures are associated with pains or symptoms of musculoskeletal dissoders. Therefore, the ergonomic evaluation of postural stresses as well as biomechanical stresses is important when a job such as automobile assembly tasks involves highly repetitive and/or prolonged poor body postures. A macropostural classification shema was developed to characterise various body postures occurring in automobile assembly tasks in the study. To specify a postural code and stress level to each body posture, perceived joint discomforts were subjectively evaluated in the lab experiments for the full range of motion in five human body joints. Based on the reaults, a postural classification scheme was developed where the full range of motion in each body joint was classified into several codes repressenting different stress levels. The automobile tasks were clustered into 12 types based on the result walk-in-surveillance and the possible posture codes for each task type are defined. I was exposed that the poor postural problems in automobile assembly tasks were concerned in most part with arms, trunk and neck. Application of te developed schema to seven operations in automobile assembly tasks showed that the schema can be used as a tool to identify the operations and tasks involving highly stressful body postures. The schema can also be utilised as a basis to prioritise the candidate assembly operations for redesign of work methods.

• 한국정밀공학회지
• /
• 제13권3호
• /
• pp.26-30
• /
• 1996

The successful development of the automobile industry in Korea is the firstfruit of the epochmaking automobile policy in 1973: Top-Down mass production of Korean model cars. In Top-Down system, indigenous model, which is the most important and difficult part of the automobile industry, is devised first, followed by the mass production of the major parts, such as bodies, engines, etc. This system is in contrast to the prevailing Bottom-up system in the third-world, which assembles automobiles by gradually adding up simple domestic parts. The Government, faced with a vicious circle of depen- dence on assembly of foreign cars, high prices, small demand and low production, decided it was time to move to the mass production of the indigenous models. It was hoped that the efficiencies of low cost Korean models would be epochally improved by overcoming the sway of foreign models and by strengthening the production capabilities of the main parts. In contrast to these develop- ment planning, assembled vehicles numbered only 26,300 units in 1973. In the year of 1995, the total number of automobile production have already passed 2,534,000. As steady growth in worldwide demand is forecast, Korea will able to play a major role as an important automobile maker of the next century.