• Transactions on Control, Automation and Systems Engineering
• /
• v.1 no.1
• /
• pp.22-31
• /
• 1999

In this paper, a robust observer design method for nonlinear multi input multi-output(MINO) plants is presented. This method enables the extension of the time delay observer (TDO) for nonlinear SISO plants in the phase variable form to MIMO plants. The designed TDO reconstructs the states of the plant expressed in the generalized observability canonical form (GOBCF), yet requiring neither the transformation of a plant, nor the real time computation coordinates, the observer turned out to be computationally efficient and easy to design for nonlinear MIMO plants. In a simulation of a two-link manipulator with flexible joints, the control performances using TDO appeared to be similar to those using actual states and superior to those using numerical differentiation. Finally, in an experiment with a robot, it was confirmed that the TDO reconstructs the states reliability and TDO can be effectively used in a real closed-loop system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1729-1730
• /
• 2008

In the industry, the automation of brazing system is very important using the vision senor and the edge detection of the bronze pipe. And also, the accurate coordination is needed for the finding of the precise location. In this paper, we propose an algorithm for the measurement of 3D information of the brazing material and the detection algorithm of soldering area using the camera and IR sensor. We use Canny edge detector in noisy environments. The experimental study shows that camera and IR sensor is useful for the measurement of distance in the brazing work.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.153-158
• /
• 2000

This paper addresses an intelligent robot control system using an off-line programming to teach a precise assembly task of electronic components in a flexible way. The investigated task consists of three job: heat caulking test, soldering on a circuit board, and checking of soldering defects on the back cover of a camera. This study investigates the remodelling of the most complicated cell in terms of the accuracy and fault rate among the twelve cells in a camera back-cover assembly line. We have attempted to enhance back-cover assembly line. We have attempted to enhance soldering quality, to add task flexibility, to reduce failure rate, and to increase product reliability. This study modifies the cell structure, and improves the soldering condition. The developed all system implements the real-time control of assembly with vision data, and realized an easier task teaching on off-line programming.

• Medical Lasers
• /
• v.9 no.2
• /
• pp.103-109
• /
• 2020

Transoral microsurgery has come a long way as a go-to surgical intervention technique for head and neck cancers. This minimally invasive procedure had gained acceptance through comparative clinical studies against radical neck surgical procedures, radiotherapy, and chemotherapy. Laser technology has vastly improved the oncological outcomes of this procedure and brought about an appreciation of transoral laser surgery (TLM) as a mainstay for re-sectioning malignant tumors along the throat. As an established procedure, TLM has undergone several upgrades regarding the different energy devices used for cutting, ablation, and hemostasis. Continued advances in automation have eventually led to surgical robotics, resulting in the emergence of transoral robotic surgery (TORS) as a viable advanced alternative for TLM. Similarly, expansions and enhancements (image-based guidance, fluorescence spectroscopy, and advanced robotic system) have also been investigated as potential upgrades for TORS. This paper reviews a selection of publications on the significant technological advancements to TLM and TORS over the past five years.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2365-2377
• /
• 2017

This paper addresses two interrelated problems concerning the tracking control of pod propulsion unmanned surface vessel (USV), namely, the modeling of pod propulsion USV, and tracking controller design. First, based on MMG modeling theory, the model of pod propulsion USV is derived. Furthermore, a practical adaptive neural tracking controller is proposed by backstepping technique, neural network approximation and adaptive method. Meanwhile, unlike some existing tracking methods for surface vessel whose control algorithms suffer from "explosion of complexity", a novel neural shunting model is introduced to solve the problem. Using a Lyapunov functional, it is proven that all error signals in the system are uniformly ultimately bounded. The advantages of the paper are that first, the underactuated characteristic of pod propulsion USV is proved; second, the neural shunting model is used to solve the problem of "explosion of complexity", and this is a combination of knowledge in the field of biology and engineering; third, the developed controller is able to capture the uncertainties without the exact information of hydrodynamic damping structure and the sea disturbances. Numerical examples have been given to illustrate the performance and effectiveness of the proposed scheme.

• Journal of Welding and Joining
• /
• v.29 no.1
• /
• pp.52-58
• /
• 2011

In this paper, the direct bonding process between FPCB and HPCB was studied. By using an ultrasonic horn which is mounted on the ultrasonic bonding machine, it is alternatively possible to bond the gold pads attached on the FPCB and HPCB at room temperature without an adhesive like ACA or NCA. The process condition for obtaining more bonding strength than 0.6 Kgf, which is commercially required, was carried out as 40 kHz of frequency, 0.6 MPa of bonding pressure and 2 second of bonding time. The peel off test was performed for evaluating bonding strength which results in more than 0.8 Kgf.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.5
• /
• pp.677-688
• /
• 2008

In this paper, the general problem of impedance control for a robotic manipulator with a moving flexible base is addressed. Impedance control imposes a relation between force and displacement at the contact point with the environment. The concept of impedance control of flexible base mobile manipulator is rather new and is being considered for first time using singular perturbation and new sliding mode control methods by authors. Initially slow and fast dynamics of robot are decoupled using singular perturbation method. Slow dynamics represents the dynamics of the manipulator with rigid base. Fast dynamics is the equivalent effect of the flexibility in the base. Then, using sliding mode control method, an impedance control law is derived for the slow dynamics. The asymptotic stability of the overall system is guaranteed using a combined control law comprising the impedance control law and a feedback control law for the fast dynamics. As first time, base flexibility was analyzed accurately in this paper for flexible base moving manipulator (FBMM). General dynamic decoupling, whole system stability guarantee and new composed robust control method were proposed. This proposed Sliding Mode Impedance Control Method (SMIC) was simulated for two FBMM models. First model is a simple FBMM composed of a 2 DOFs planar manipulator and a single DOF moving base with flexibility in between. Second FBMM model is a complete advanced 10 DOF FBMM composed of a 4 DOF manipulator and a 6 DOF moving base with flexibility. This controller provides desired position/force control accurately with satisfactory damped vibrations especially at the point of contact. This is the first time that SMIC was addressed for FBMM.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.2
• /
• pp.180-186
• /
• 2011

This paper describes a micro electrical discharge machining (MEDM) technique that uses an insulated tool in combination with ultrasonic vibration to drill micro holes. As the machining depth becomes deeper, the dispersion of debris and circulation of the dielectric fluid are difficult to occur. Consequently, machining becomes unstable in the machining region and unnecessary electrochemical dissolution and secondary discharge sparking occur at the tool side face. To reduce the amount of unnecessary side machining, an insulated tool was used. Ultrasonic vibration was applied to the MEDM work fluid to better remove debris. Through these methods, a $1000\;{\mu}m$ thick stainless steel plate was machined by using a $73\;{\mu}m$ diameter electrode. The diameters of the hole entrance and exit were $96\;{\mu}m$ and $88\;{\mu}m$, respectively. It took only 351s to completely drill one hole.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.14-19
• /
• 1998

In this paper, a target approachable force-guided control with adaptive accommodation for the complex assembly is presented. The complex assembly (CA) is defined as a task which deals with complex shaped parts including concavity or whose environment is so complex that unexpected contacts occur frequently during insertion. CA tasks are encountered frequently in the field of the manufacturing automation and various robot applications. To make CA successful, both the bounded wrench condition and the target approachability condition should be satisfied simultaneously during insertion. By applying the convex optimization technique, an optimum target approaching twist can be determined at each instantaneous contact state as a global minimum solution. Incorporated with an admissible perturbation method, a new CA algorithm using only the sensed resultant wrench and the target twist is developed without motion planning nor contact analysis which requires the geometry of the part and the environment. Finally, a VME-bus based real-time control system is built to experiment various CA task. T-insertion task as a planar CA and double-peg assembly task as a spacial assembly were successfully executed by implementing the new force-guided control with adaptive accommodation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.2
• /
• pp.165-173
• /
• 2012

Nationally, flatfish vaccination has been performed manually, and is a laborious and time-consuming procedure with low accuracy. The handling requirement also makes it prone to contamination. With a view to eliminating these drawbacks, we designed an automatic vaccine system in which the injection is delivered by a Cartesian coordinate robot guided by a vision system. The automatic vaccine injection system is driven by an injection site location algorithm that uses a template-matching technique. The proposed algorithm was designed to derive the time and possible angles of injection by comparing a search area with a template. The algorithm is able to vaccinate various sizes of flatfish, even when they are loaded at different angles. We validated the performance of the proposed algorithm by analyzing the injection error under randomly generated loading angles. The proposed algorithm allowed an injection rate of 2000 per hour on average. Vaccination of flatfish with a body length of up to 500mm was possible, even when the orientation of the fish was random. The injection errors in various sizes of flatfish were very small, ranging from 0 to 0.6mm.