• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.5
• /
• pp.830-837
• /
• 2015

A study which is to develop the low-cost urban railway system for low-density line such as Gwang-ju subway Line 2 is in progress, and its TCS(Train Control System) is required as an economic system which is able to train operation suitable in low-density line. We have developed the signaling equipment which is configured with automatic block system between stations, and the control center's equipment in order to meet the requirements of TCS mentioned above. In this paper, we propose the control procedure of ATS to be required for train operation management in the low-density line such as Gwang-ju subway Line 2. The control procedure of ATS considered all features such as the requirements analysis for train operation management, the functions of train control system to be applied and the block type. Also, it considered the station(interlocking, passenger, turn-back) type, station control(stop, route, departure, turn-back departure, turn-back) type, and train operation management for exiting and entering depot. The ATS control procedure proposed in this paper has an advantage in the cost and efficiency through unification and optimization of its function. And in cost of operating and maintenance, the ATS system has a feature that can be significantly reduced.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.162-169
• /
• 2016

Gyeong-bu railway line in Korea between Seoul and Cheon-an was built as two double tracks. A four-display signaling system, only for the metro line, was installed on the second double track so KTX and conventional trains can only operate on the first double track. This study suggests a method to allow KTX and conventional trains operated on the five-display signaling system to respond to accidents and track defects on the second double-track under the four-display signal system by means of problem analysis, calculation of breaking distances for KTX and conventional trains at each break mode, and improvement of the ATS system.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1461-1466
• /
• 2004

Recently Domestic EMU's on board signal systems are gradually changed form Cab signal(Fix Block) to Distance-to-go. Interfaces with on board signal system, TCMS Redundancy structure is mainly required. This paper suggest Manaul/Automatic Driving based on TCMS-ATC interface and design of backup system which is operated by Stan-by Computer when one of it's Local Interface Unit(LIU) is out of oder. For the purpose of Precision Train Stop, Distance-to-go signal system require accuracy speed. Free-axle structure is required for this system This paper suggest Free-axle braking system that lack of brake-force is compensated by the distributed brake-force using TCMS. And one of braking system has out of order, compensation of brake-force for Free-axle system. Then we prove our design to Complete Car Test

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1326-1328
• /
• 2003

이 논문은 ATS(Automatic Train Stop)의 신호를 측정하기 위해 개발된 측정시스템을 소개하고, 측정 결과를 고찰하여 향후 연구 방향을 제시하고자 한다. 기존선 고속화 요구에 따른 신호보안설비의 개선이 요구되지만 기존의 설비를 전면적으로 교체하기에는 기간 및 많은 비용이 요구된다. 그러기 위해서 기존의 ATS에 대해서 성능을 점검하고 고속화를 위한 개선점을 찾아 신호설비 개량전에 단계적 고속화가 필요하다. 그러므로 본 논문에서는 신호 고속화 시스템을 위해 기존신호 시스템의 특징을 조사하였다. 이 논문에서는 NI사의 상용 A/D 보드와 LabVIEW를 사용하여 측정시스템을 만들어 측정하였다. 측정결과는 기존의 ATS의 신호가 고속에서는 응동시간이 문제가 있으며, 고속화를 위해서는 일부 개량이 필요하다. 그러나 승객의 안전에 관련된 사안이므로 더 다양한 방향에서의 고찰이 필요할 것으로 보인다.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.392-394
• /
• 2000

열차의 신호 시스템은 열차의 안전운행에 있어 매우 중요한 기술로, 고도의 기술적 능력과 경험이 요구되는 분야이다. 그 동안 당사에서 개발한 ATS(Automatic Train Stop)를 제외한 대부분의 철도 제어 신호 시스템은 국내에서는 개발이 잘 안되었고, 설사 개발되었다 해도 실제 운행 실적이 없다 하여, 철도나 지하철 및 경량 전철에 적용하는 데에 어려움이 많았다. 이에 본 논문에서는 당사의 기술과 외국의 협력업체의 기술을 결합하여 철도 신호 보안 시스템의 최적 구축 방안에 대해 연구하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3911-3916
• /
• 2010

In this paper we describe contents and results on running test for ATP on-board equipment, which has propelled as one of the research projects, so called, "Reliability assessment and operation technology development for Korean-type tilting trains" in order to ensure the safety and operation efficiency of tilting trains. We developed tilting trains for the speed-up of conventional lines and for the passenger service improvement where the KTX is not available. And we made progress the operation trial test in the 120,000 km distance with the use of ATS equipment, used in existing lines, for the purpose of the reliability assessment of the developed tilting trains. We decided to accelerate the speed for more than 200km/h with respect to the 6 existing lines including Jungang-line and Chungbuk-line where KTX has not operated. According to this decision, Train control system is to be changed from ATS to ATP. We should have installed an ATP on-board unit in tilting trains and verified the operational suitability, therefore we installed the same ATP on-board unit on tilting trains as that used in the ATP construction project on Gyeongbu-line and Honam-line, and verified that the function and performance of the installed ATP on-board unit conformed to the tilting trains operation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.119-128
• /
• 2004

With the growing traffic density and increasing comfort requirements, the automation of the drive train will gain importance in vehicles. The automatic clutch actuation relieves the drivers especially in urban driving and stop-and-go traffic conditions. This paper describes the dynamic modeling of a clutch actuator and clutch spring. The dynamic model of the clutch system is developed using MATLAB/Simulink, and evaluated by experimental data using a test rig. This performance simulator is useful to develop the clutch-by-wire (CBW) system for an automated manual transmission (AMT). The electro-mechanical type CBW system is also implemented as an automatic clutch for AMT. The prototype of CBW system is designed and implemented systematically, which is composed of an electric motor, worm gear and slider-crank mechanism. The test rig is developed to perform the basic function test of the automatic clutch, and the developed prototype is validated by the experimental data on the test rig.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.456-461
• /
• 2003

기존선 속도 향상 및 병목현상 해소와 안전운행을 위해 국내 철도 현황의 주요 분야를 검토한 후, 국내 17년동안 사용으로 안전성이 검증된 신호기술을 바탕으로 국내 실정에 적합하며, 기존의 ATS 장치를 개선한 정보형 ATS(ATPS)를 개발하여 이를 제시하였다. 본 시스템은 운행 중인 열차의 제동특성을 고려하여 구간별 제한속도를 상향 조정하여 운행 효율을 증가 시킬 수 있다. 또, 안전성과 신뢰성 보장을 위해 Fail-Safe 및 이중계(redundancy)로 제작 하였고, 기존의 차상자와 발진기를 통합함으로써 Q factor를 개선하여 무응동 방지 및 기준 응동시간 비교방식을 통해 오동작을 개선하였다. 그리고, 정보기록 장치를 추가함으로써 이미 기록되어있는 차량정보데이터와 지상정보데이터를 연산하여 운전정보를 제공하고 기록한다. 또한, 이 운전정보는 정보 분석용 PC 및 프로그램에 의해 쉽게 분석, 관리가 가능하다. 무엇보다도 기존 ATS 구간과의 겸용사용으로 영업 운전시 안전한 연속 운행 보장 및 지상설비 개량 없이 안전을 확보할 수 있다. 다양한 종류의 동력차에 설치, 인터페이스 및 지상설비 개량이 용이하다. 향후 틸팅 시스템과 연계하여 틸팅 제어/감시 신호를 제공하는 기능을 갖는다.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.248-255
• /
• 2014

Though the Platform Screen Door System (PSD) has received a positive evaluation and is installed in all the Urban Railroad platforms, PSD is not installed in the Intercity Railroad platforms. The limitation of PSD in the Intercity Railroad platforms is due to the fact that first, various types of trains such as KTX, Saemaeul, Mugunghwa, and Nuriro stop at the platforms and their locations of the doors are different and secondly, they are not operated under ATO (automatic train operation). RPSD system currently under research and development, on the other hand, is based on the improved door that slides up and down and can be installed in any Intercity Railroad platform regardless of the length of the train, the location of doors, and the number of doors. This study considers the mechanism of RPSD, develops a manual open/close algorithm, and evaluates the function of RPSD. The results show that the manual open/close algorithm achieves a significant improvement in efficiency when provided with power supply.