• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1309-1311
• /
• 2003

Communication based train control system is applied regularly worldwide. And this system may be used in domestic soon. Communication based train control system does not depend on conventional track circuit. Therefore, position and distance control of train to prevent collision with loading train may become important safety factor. This paper developed collision avoidance algorithm to control trains of several units efficiently for this. In developing a collision avoidance algorithm, it is desirable to avoid the need for additional system. Additional system restricts the development of the algorithm by limiting the effectiveness of the algorithm to only those areas where the additional system can be afforded and has been installed.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.900-905
• /
• 2006

5678SMRT (Seoul Metropolitan Rapid Transit Co) by a ATC/ATO system the other side which is operated with an automatic movement with a manual operation, the Seoul subway 1.2 lines ATS and 3.4 lines adopt a ATC method and they are operated. But it is improving progressively in SMRT railway ATO method. The ATO the operation method leads exchange of information of wayside and train system for and it is possible, the TWC system configuration is becoming wayside and train system and the radio antenna. It discussed the equipment for a TWC system and a automatic operation from the dissertation which it sees. It investigated a data exchange, a message format and an interface control method and it joined in and a system maintenance conservative method it discussed.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.796-801
• /
• 2006

Smart열차진로제어시스템은 실시간 열차속도와 열차위치정보를 토대로 진로제어구간을 진입 또는 진출하는 해당 열차의 진로를 제어한다. 현재 운용중인 열차진로제어알고리즘은 궤도회로를 이용해서 검지한 열차점유정보를 사용하고 있으므로, 새로운 개념의 알고리즘개발이 필요하다. 이를 위해서 다양한 형식의 열차가 감속성능을 구현할 수 있는 전동기와 구동장치를 사용하는 모의장치의 개발을 완료하였다. 모의장치는 무선통신기반의 간선철도용 열차진로제어시스템개발을 목적으로 하고 있으나, 알고리즘개발의 효율성과 편리성을 갖추기 위해서 ATS(Automatic Train Supervision), ATC(Automatic Train Control) 및 ATO(Automatic Train Operation) 등의 기능을 구현할 수 있도록 모의장치를 개발하였다. 본 논문에서는 모의장치 구성, 모의장치의 하부장치별 기능 및 각 하부장치에 설치되어 있는 프로그램구성을 다루고 있다.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.601-605
• /
• 2006

Reliability of the Railway signaling system which is safety critical is determined by reliability of hardware and software. Reliability of hardware is easily predicted and demonstrated through lots of different studies and environmental tests, while that of software is estimated by the iterative test outcomes so estimates of reliability will depend on the inputs. Combinations of inputs to and outputs from the software may be mostly combinatoric and therefore all the combinations could not be tested. As a result, it has been more important to calculate reliability by means of a simpler method. This paper identifies the reliability prediction equation applicable to reliability prediction for railway signaling system software, and performs the simulation of onboard equipment of automatic train control for high speed train to review reliability prediction and validity.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.852-858
• /
• 2009

This paper is a study on the reliability management of onboard signaling equipment for the Koran Tilting Train (TTX) to run the existing railway to express railway. For safe running of tilting train which operates at Automatic Train Protection (ATP) and Automatic Train Stop (ATS), a reliability management plan for TTX onboard is proposed for preventing train safety from driver oversight and malfunction by establishing braking curves based on movement authority and speed limit, according to preceding train location and rail conditions. Also, reliability of TTX onboard equipment on the basis of proposed plan was estimated, and actual case studies based on the international requirements IEC 62278 (EN 50126) were provided to verify its reliability.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1247-1252
• /
• 2004

ATC(Automatic Train Control) system employed in Bundang urban transit is operated in accordance with automatic blocking equipment. Using AF(Audio Frequency) track circuits installed at a block section, the block signal is automatically controlled and the safety of train operation is supported. In this paper, we investigate the operation mode of bundang urban transit and analyze the operation algorithm of ATC on-board system.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.941-946
• /
• 2006

It followed in system development and SMRT(Seoul Metropolitan Rapid Transit Co)System reached to an automatic train operation(ATO) and driverless operation(DLM) from the manual operation due to the train driver. The train like the general bus or the car vehicle was not serial riding in a car and the Parallel concept which the numerous passenger rides in a car simultaneously occur frequently the charge of the train driver unmanned bitterly from existing manual handling was a possibility of doing, train open door control(ODM) which bites also ATO, it handles it minimized. Like this ATO/DLM, the control system which bites being a Wayside to Train communication for immediacy, it is a system of the Vital concept the immediacy of the citizen Data evil the radio information transmission and the train of the interface which is accurate from unmanned operation and, will decipher, will accomplish it will guarantee. It respects the passenger accident prevention and an air question environment improvement from subway platform and phul leys the screen door of Platform(PSD) with the fire tube frost it refers and part it treats and to sleep it does, ODM which bites is accuracy and immediacy of altitude and when seeing from the viewpoint which demands the trust of altitude, ODM system the trust of car incest interface in the equipment construction which is safe and the comparative analysis back of the system analysis against the control which bites and case study and other subway system it leads from the research which it sees and signal - train in base grudge to sleep it contributes it does.

• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.29-36
• /
• 2012

This paper includes ATP(Automatic Train Protection) simulator development and ATP algorithm verification to allocate wayside and train-borne and verify ATP functions of communications based train control system. The train control system has some characteristics such as simple structure and high safety when wireless communication technology is applied to the train control system. Especially, vital functions can be performed with in wayside and train-borne ATP. However, different system can be realized because I/F contents vary in accordance with vital functional allocation of ATP. Drawing characteristics in accordance with wayside and train-borne functional allocation and drawing I/F details affected by such characteristics are needed accordingly. This paper includes ATP simulator development creating train location information by direct activation of an electric motor, verifies train safety distance control algorithm of ATP by functional allocation such as train movement authority and train speed limit to ATP, and draws any supplementation needed. Appropriate simulated environment for verify ATP algorithm and main factors that affect to the ATP function were confirmed.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1300-1303
• /
• 2004

Using AF(Audio Frequency) track circuits to control block signal automatically. ATC(Automatic Train Control) system employed in urban transit 3/4 line, Gwacheon-line, Bundang-line and Ilsan-line pursues the safety of train operation. ATC is employed as important means for the safety. in which the distance between trains is controlled to satisfy the safety requirement. In this paper, we analyze the control algorithm of ATC and investigate the improvement plan of urban transit driving control mode to guarantee the automatic driving function.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2125-2130
• /
• 2010

The neutral section on electric railway system is significant sector in order to prevent short circuit of two electric powers. However, while electric trains pass the neutral section, those speed is decreased and the accident of AC electric traction system and the electric train would be occurred. So the countermeasures are urgently needed. The automatic power switching technology system that is current being research and development is system to improve these problems. Because main object of this system is power change using static switch in the neutral section, it's expected to cause a variety of transients. Especially, onboard transformer inrush current for electric railway train can be occurred more than rated current according to switching time. Therefore, the analysis and improvement are needed to ensure the stability of this system. In this paper, we analyze the operating characteristics of the automatic power switching technology system. Especially, it reviews inrush current according to the closing phase angle. And we propose control plan of inrush current considering the case that voltage is maintained due to counter electromotive force and regenerative braking operation of electric railway train. Finally, the proposed control scheme was reviewed using the transient analysis program.