• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1845-1849
• /
• 2009

하천 유량자료의 중요성이 커짐에 따라 기존 유량측정 기법의 정확도를 향상시키는 기술개발이 필요하다. 자동유량측정은 기존 유량측정방법의 한계를 극복하기 위해 많은 개발이 이루어 졌다. 최근 초음파 유량계와 더불어 자동 유량 측정 방법으로 널리 사용되고 있는 기법이 유속지수법(index velocity method)이다. 유속지수법은 기존의 수위-유량관계식이 수위만을 변수로 이용하여 발생되는 한계를 극복하기 위해 유속을 추가적인 지수로 이용하여 유량을 산정하는 방법이다. 본 연구에서는 유속지수법의 적용을 위해 연속적인 유속, 수위 측정이 가능한 측방형 (side-looking) Acoustic Doppler Velocity Meter(ADVM)을 괴산댐 하류에 설치·운영하고 그 결과를 이용하여 유량을 산정하는 방법을 개발하였다. 2005년부터 2008년까지 유속지수법에 의해 산정된 유량 자료의 상대오차는 댐방류량에 비해 각각 평균 5.2%, 6.7%, 6.5%, 6.5%로 나타났다. 기존의 수위-유량 관계식에 의해 산정된 유량 자료가 댐 방류량에 비해 각각 평균 9.9%, 28.6%,34.0%, 54.2%로 나타난 것과 비교한다면 상당히 높은 정확도를 보였으며, 시간에 따른 오차 발생이 적어 운영에 효율적인 것으로 판단된다. 이와 같은 유속지수법을 하천 유량 측정에 적용한다면 보다 정확한 유량을 연속적으로 자동화하여 측정할 수 있을 것으로 기대된다.

• Journal of Environmental Science International
• /
• v.4 no.2
• /
• pp.181-194
• /
• 1995

Flocculation kinetics using ferric nitrate as a coagulant to coagulate kaolin clay in water was examined as a tool to investigate the effect of low temperature under tightly controlled treatment conditions. Both the particle size distribution data obtained from Automatic Image Analysis (AIA) system and the on-line measurement of the degree of turbidity fluctuation in a flowing suspension by Photometric Dispersion Analyzer (PDA) were used to measure flocculation kinetics. Results show that cold water temperature had a pronounced detrimental effect on flocculation kinetics. For improving flocculation kinetics at low water temperature, maintaining constant pOH to adjust water chemistry for temperature changes was found to be partially effective only in the more acidic pH range studied.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2003.05a
• /
• pp.36-40
• /
• 2003

근래에 들어 질병으로 인하여 의사표현이 곤란한 환자에게 뇌파에 기초한 BCI(Brain Computer Interface)와 같은 새로운 인터페이스를 제공하고자 하는 연구가 활발히 진행되고 있다. BCI를 위한 기초 연구로서 특정 자극에 대해 유발되는 뇌파의 측정과 분석은 BCI를 위한 뇌파의 패턴과 인터페이스의 설계에 중요한 역할을 한다. 이 연구의 목적은 시청각 자극 인가후 피험자의 반응 시간을 측정하는 시스템을 EEG와 같은 생체 신호 계측 시스템과 연동이 가능한 형태로 개발하는 것이다. 제안된 시스템은 기능적으로 자극 신호 발생부, 반응시간 측정부, 유발뇌파 측정부, 동기신호발생부로 나뉘어진다. 자극신호 발생부는 실험에 이용되는 자극신호를 제작하는 부분으로서 Flash를 사용하여 구현하였다. 반응시간 측정부는 문제에 대한 답 선택 요청시각으로부터 피험자의 반응까지의 시간을 측정하는 부분으로서 마이크로 컴퓨터(80C31)를 이용하여 구현하였다. 우발뇌파 측정부는 시판용 하드웨어와 소프트웨어를 그대로 사용하였다. 동기신호 발생부는 전체 시스템의 동기를 맞추기 위한 신호를 발생하는 부분으로서 문제제시, 답요구와 동기한 화면상의 명암 신호와 이를 검출하는 광센서로 구성하였다. 본 논문에서 제시한 방법에서는 기존의 유발진위 측정 및 자극시스템에 특정 모듈(반응시간 측정 장치, 동기신호 발생장치)만을 추가하여 실험자의 의도에 맞는 시스템을 설계할 수 있어 유발 뇌파 및 반응시간 측정을 필요로 하는 연구를 가속화 할 것이 기대된다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.222-229
• /
• 1999

In order to regulate cutting torque in milling, monitoring system should be set to a certain threshold. Radial immersion ratio is an important factor to determine the threshold and should be estimated in process for automatic regulation. In this paper, on-line estimation of the radial immersion ration using spindle motor current in face milling is presented. When a tooth finishes sweeping, a sudden drop of cutting torque occurs. This torque drop is equal to cutting torque acting on a single tooth at the swept angle of cut and can be acquired form cutting torque signals. Average cutting torque per revolution can also be calculate form cutting torque signals. The ratio of cutting torque acting on a single tooth at the swept angle of cut to the average cutting torque per revolution is a function of the swept angle of cut and the number of teeth. Using the magnitude of this ratio, the radial immersion ratio is estimated. Identical algorithm is adopted to estimate the immersion ratio based on the spindle motor current measurement. The experiments performed under different cutting conditions show that the radial immersion ratio can be estimated within 10% error range by the proposed method using spindle motor current.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.4
• /
• pp.379-386
• /
• 2016

As well as to operate a high-speed rail, our country with capability to produce high-speed train has developed a number of techniques, such as for a riding comfort improvement, automatic diagnosis for major electrical or mechanical parts, on board measurement for catenary systems and noise reduction of running rolling-stocks are still under development. In this paper, we describe the current status of operation technologies not only traditional railway wireless communication systems but also Long Term Evolution systems which would be deployed as soon as possible, like as in Europe, China and the United States. In addition, we produced the domestic wireless communication networks for railway which KORAIL Corp. has been operating and the schemes and the plans of HSR field test for the fourth generation mobile communication which should be enforced by national research and development.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.1910-1915
• /
• 2008

The load analysis for the distribution system and facilities has relied on measurement equipment. Moreover, load monitoring incurs huge costs in terms of installation and maintenance. This paper presents a new model to analyze wherein facilities load under a feeder every 15 minutes using meter reading data that can be obtained from a power consumer every 15 minute or a month even without setting up any measuring equipment. After the data warehouse is constructed by interfacing the legacy system required for the load calculation, the relationship between the distribution system and the power consumer is established. Once the load pattern is forecasted by applying clustering and classification algorithm of temporal data mining techniques for the power customer who is not involved in Automatic Meter Reading(AMR), a single-line diagram per feeder is created, and power flow calculation is executed. The calculation result is analyzed using various temporal and spatial analysis methods such as Internet Geographic Information System(GIS), single-line diagram, and Online Analytical Processing (OLAP).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.166-174
• /
• 2008

Recently, the automotive industry has been developing rapidly. With the progress parts of the automobile components need high quality and the reliability. Among them, braking unit is essential device, and acquire the reliability through the performance test of brake. This study was aimed to design the performance-test-bench to measure the drag torque which has effect on caliper in braking unit. In this progressive technology, it is vital importance to use hydraulic and pneumatic, and to combine test bench with instrumentation engineering technology. This system to construct the design of hydraulic and pneumatic circuit, interface technique between sensors and personal computer, data acquisition and display design, and integrated control are very important technology. Moreover, reliable data are obtained through vacuum system and hydraulic and pneumatic system by using of booster and brake master cylinder which are actually applied to automobile. Then, data signal detector sensors for speed, pressure and torque is attached on this system. Therefore, in this study, we designed a performance-test-bench by and we also made an total control system using personal computer which is more progressive and flexible method than existing PLC control.

• Journal of Sensor Science and Technology
• /
• v.7 no.5
• /
• pp.342-349
• /
• 1998

A multipurpose TLD readout system for radiation dosimetry and thermoluminescence study is constructed and its characteristics are investigated. The thermoluminescent lights are measured by a PM tube and the current-to-frequency converter. TLDs are heated by platinum heater and the heating rate is linearly varied. Measurement of the glow curve and control of the whole system have been done by a personal computer equipped with an interface board. The automatic gain control can be done by the control software. The lower detection limit of the system is about $10\;{\mu}Gy$ and dose response is linear.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.172-174
• /
• 2007

An electronic watt-hour meter with high-precision measurement technology can provide many valuable metering data of a real-time system measurements, such as per-phase voltage, ampere, active power, reactive power, apparent power, power factor, and system frequency. Also many of accumulated metering data such as active energy, reactive energy, apparent energy, and load profile can be gettable from an electronic watt-hour meter[1]. This paper presents an approach of the small-sized AMR (Automatic Meter Reading) that provides customers with a very valuable electrical service. This AMR service transmits lots of a valuable metering data by using ZigBee communication module, so that users resided in their premises can use the information to audit a power quality and improve their electrical conditions by using the PQ monitoring device equipped with ZigBee receiver. This PQ monitoring device shows metering data on LCD and transmits to the PC through an internal network. Also, the device can keep the valuable meter data into a built-in non-volatile memory. The final goal of this paper is to better understand the power quality of electrical systems and offer the power qualify information for the convenience of all power consumers.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.2
• /
• pp.77-83
• /
• 2014

This paper describes a new technology to develop the character recognition technology based on pattern recognition for non-contacting inspection optical lens slant or precision parts, and including external form state of lens or electronic parts for the performance verification, this development can achieve badness finding. And, establish to existing reflex data because inputting surface badness degree of scratch's standard specification condition directly, and error designed to distinguish from product more than schedule error to badness product by normalcy product within schedule extent after calculate the error comparing actuality measurement reflex data and standard reflex data mutually. Developed system to smallest 1 pixel unit though measuring is possible 1 pixel as $37{\mu}m{\times}37{\mu}m$ ($0.1369{\times}10-4mm^2$) the accuracy to $1.5{\times}10-4mm$ minutely measuring is possible performance verification and trust ability through an experiment prove.