• 한국컴퓨터정보학회논문지
• /
• 제23권3호
• /
• pp.9-16
• /
• 2018

In this paper, I purpose one of the development methods for portable Automatic field Test Equipment(ATE) with VME form factor. Almost portable ATE have not used to standards form factor and they are connected by mechanical non-rigid general connectors and wire harnesses among the components. Furthermore, it is hard to reuse developed board. So, it decreases to reusability of developed board and it is hard to maintenance of ATE. Even those things have weakness for vibration and drop test especially in portable ATE. The XK9A1 ATE using VME form factor has environmental reliability through vibration, drop, temperature test. It consists of 5 developed board called the control board, the wire & wireless communication board, the power supply board, the load board and the mother board. It is connected by two wire harnesses between mother board and extern circular connectors. The control board send the data and address to other board though each 16-bit data and 20-bit address line. You can develop the function board what you want to using those data & address line when it comes to needing other function board.

• 한국항행학회논문지
• /
• 제22권2호
• /
• pp.64-69
• /
• 2018

비행체의 탑재장비의 야전정비를 위한 자동점검장비는 특수목적을 위한 소수의 비행체를 운용할 경우에는 통합 설계하는 것이 효율적이다. 통합형 자동점검장비는 공통적으로 사용되는 인터페이스를 식별하여 각 점검대상장비 별 점검에 사용할 수 있도록 분기하거나 경로를 생성해주는 방식이 사용된다. 분기 및 경로 생성 시 RTD, TC 및 아날로그 전압과 같은 고정밀 신호는 신호분기 및 연결 시 도선저항에 의한 측정 오류가 발생할 수 있다. 이러한 도선저항에 의한 측정 오류는 점검대상장비 설계 시 많은 제약을 가져오게 된다. 본 논문에서는 아날로그 전압 및 고정밀 신호의 측정오류를 최소화 할 수 있는 통합형 자동점검장비의 고정밀 신호의 보정방법을 제시한다.

• 전자공학회논문지SC
• /
• 제49권1호
• /
• pp.80-87
• /
• 2012

본 논문에서는 열상장비의 광 검출기에서 검출된 미약한 전기적 신호를 영상신호처리를 하기 위한 신호로 증폭을 해 주는 전단 증폭부의 성능 검사용 ATE(Automatic Test Equipment)를 개발하였다. 기존 ATE 장비는 주로 반도체 소자 양품검사 분야에서 활발히 개발되고 있었으나 최근에는 장비의 성능검사 분야에서도 연구되고 있다. 그러나 열상장비 성능검사 분야의 ATE 에 대한 연구는 다른 분야에 비해 미진하여 우리군의 핵심적인 감시 장비인 열상장비는 정비가 제한되었다. 이에 따라 본 논문에서는 새로운 열상장비 분야의 ATE 연구가 필요하여 전단증폭부 및 열상장비의 다른 회로카드의 범용적인 개발이 가능하도록 Matrix Relay를 개발하였다. 개발된 ATE로 전단증폭부의 증폭도를 측정한 결과 증폭 전압은 평균 2.71 Vpp로써 이론적인 분석 범위 내에 있음이 확인되어 개발된 ATE가 우수한 성능임이 검증되었다.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.302-315
• /
• 2021

In this study, factors such as improvement of a fishing process and safety, reduction of the labor force and headcount and development of the automation technology for offshore (eel and crab) pot fishing vessels were analyzed. A questionnaire survey was conducted to analyze and select the key factors using independent/paired sample t-test and correlation analysis, and a living lab was operated with ship owners, skippers and experts to discuss practical needs of the site. From the result of questionnaire survey and field requirements, it was possible to understand the level of awareness of ship safety, general safety equipment, fishing work process and fishing safety equipment from the point of view of the field. In addition, there were differences in the measurement results of each items because the working environment and experience were different according to the position of the ship owner and the skipper. The results of the questionnaire survey and various perceptions of field stakeholders were reflected when analyzing the fishing system and fishing process to choose the development equipment applicable to the field. From the analysis results, the selected development equipment based on the fishing equipment and process currently in operation are pot washing device, catch separation and fish hold injection device, length limit regulations and bait ejection device after use, automatic main line winding device, bait crusher, automatic (crab) pot hauling separator and so on.

• 한국컴퓨터정보학회논문지
• /
• 제23권8호
• /
• pp.1-7
• /
• 2018

Previous test equipment was bulky, took a long time to check, and was somewhat less economical. Since most of the checks were about analog signals, we preferred to check them using reference equipments. In this paper, a digital circuit design based on AITS is used to implement signals that can not utilize commercial measurement resources, and also designed and manufactured equipment that can inspect SRU. These test equipments were tested and evaluated by development, operation, and field evaluation, and they were installed to the Korean Field Force. This contributed to the improvement of operability by shortening the inspection time from 83.2 minutes to 7.8 minutes on average In addition, it did not utilize the reference equipment, so it could play a big role in lowering the mass production cost.

• 한국산학기술학회논문지
• /
• 제21권9호
• /
• pp.144-150
• /
• 2020

본 논문에서는 국외에서 정의하는 자동화시험시스템과 자동화시험장비(ATE)의 비교를 통해 국내 ATE 재정립을 비롯해 국내 유도무기 분야의 ATE 현황을 살펴보면서 국방 분야 ATE의 유효성 확인 방안을 모색해 보았다. 국내 무기체계 개발단계 ATE 장비 유효성 확인 방안 모색을 위한 활동으로 국내 유도무기 분야의 ATE 장비 현황을 분석하고 ATE 유효성 확인 방안을 살펴보았다. 신규 제작되는 ATE에 대해 반복성, 재현성 확인 방안 및 현재 사용되는 ATE의 유효성 확인을 위하여 특정 유도제어부 영상성능에 대해 오류 주입시험을 수행해 보았다. 개발단계부터 유효성 확인을 위한 방안으로 ATE의 설계 및 구현시 사전점검단계 기능을 요구사항으로 반영되야 할 필요성을 논하였으며, 국내 ATE 개발 시 표준화된 국제표준시험시스템 테스트 스크립트 언어를 활용하여 효율적인 유효성 확인과 SW 신뢰성 확보 가능성을 검토해 보았다. 이를 통하면 장기적으로 주장비와 시험장비 간 상호 연동성을 확보할 수 있으며 시험자는 표준화된 시험방식을 지원하는 시험시스템 플랫폼을 확보할 수 있어 무기체계별 특정 ATE 유효성 확인에 효과적일 것으로 판단된다.

• 전기학회논문지P
• /
• 제53권2호
• /
• pp.70-76
• /
• 2004

The purpose of interlocking system in railway is to prevent the route for a train being set up and its protecting signal cleared if there were already another, conflicting route set up and the protecting signal for that route cleared. Recently, conventional relays circuitry in industrial field is replaced to computer-based control systems according to the advance of computer and communication technology. Therefore, interlocking systems in railway field are rapidly changing from existing relay-based interlocking system to computer-based electronic ones that executes the vital interlocking logic to assure the safety train routes at trackside signaling equipment room using electronic circuits. So it is very important to verify the performance of developed electronic interlocking system by plentiful laboratory testing before actually application in the railway system. However the laboratory testing in the present state of railway signaling is preformed individually by manual, so very much test time and cost are required. To solve these problems, we are developed the simulator for automatic interlocking inspection in this research. This simulator is able to operate on general personal computer and has following beneficial functions : automatic test sheet generation for inspection, automatic inspection execution and et al. The experiments are executed to test the feasibility of the developed simulator the experimental results have good agreements with the anticipated ones.

• 한국환경과학회지
• /
• 제11권10호
• /
• pp.1055-1060
• /
• 2002

A new method of automatic recording raingauge is developed to measure rainfall 1200mm full scale with high accuracy and resolution. The principle of new instrument is to detect a weight change of a buoyant weight according to a change in water level of raingauge measured by the use of a strain gauge load cell. This method has the advantage of increasing measurement accuracy, since no moving equipment is used. Laboratory test of the instrument was recorded 0.4% error of 190mm rainfall amount. The validity of new instrument was examined by comparing its measured values with values recorded by automatic weather station on June 24 to 25 2001 at Daegu Meteorological Station, when there is 148.3mm rainfall amount. In spite of much rainfall there is only 0.77mm difference of total rainfall amount. This instrument was accomplished high accuracy and resolution at field test in much rainy day.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제24권1호
• /
• pp.33-39
• /
• 2018

현재 국방시뮬레이션 분야에서 통합시험을 위해 각각의 실 장비 및 모의기(Simulator)들 자체 로깅정보는 자동화가 되어있다. 통합시험시스템의 특이사항은 시험일지로 작성하고 있지만, 자동화가 되어 있지 않아 여전히 운용자의 수기작성 또는 파일작성에 의존하고 있어, 기록 내용 부실 및 동일 내용 반복작성 등 비효율적인 면이 존재한다. 본 논문에서는 이러한 문제점들을 해결하기 위해 자동 시험일지 기록 프로그램을 제안하고자 한다. 자동 시험일지 기록프로그램은 프레임워크 기반 기술을 활용해 시험일지에 기록해야 할 정보를 운용통제컴퓨터와 운용자로부터 수신 받아 일지를 기록해준다. 자동 시험일지 기록프로그램이 운용자의 반복적인 시험내용을 안정적으로 기록할 수 있게 한다. 또한, 시험 운용인원이 제한적이어도 운용자가 통합시험에만 집중할 수 있도록 효율성을 높여주었다.

• 한국철도학회논문집
• /
• 제5권2호
• /
• pp.104-111
• /
• 2002

The purpose of interlocking system was to prevent the route for a train being set up and its protecting signal cleared if there was already another, conflicting route set up and the protecting signal for that route cleared. This paper proposed Interlocking Inspection System(IIS) consisting of interlocking simulator and field simulator to operate interlocking test of computer based Electronic Interlocking System(EIS) in this paper. Interlocking simulator consists of Design Edit System(DES), Logical Database Management Tool(LDMT) and real-time confirming system, field simulator is a equipment to simulate a control object of EIS and constitutes configuration operated in 19 inch standard rack. As a result of test to prove capacity of this IIS, the efficiency was shown as excellent. Therefore by using inspection system, we obtain every advantages. It has the functions for test data generation and automatic test execution based on personal computer. Time and cost for test work can be reduced more efficiently by using this developed inspection system