• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.675-681
• /
• 2015

When many holes on a plane are machined simultaneously, the positional precision and machining efficiency are very important. Multi-spindle heads are typical order making products of which the number of shafts and hole positions vary depending on the size or form of the product. For the automatic design of multi-spindle heads, the design modules for power transmission systems for drive, idle, and spindle shafts were developed, and a design technique the determining the optimum position and number of idle shafts according to gear positions was developed. In addition, for the precise determination of the multi-spindle head, the design methods for the guide planes of columns, and feed mechanisms were devised. In addition, the design modules for accurate clamping and automatic transportation mechanisms were developed. Finally, in order to simplify and standardize the design process, the design analysis and simulation verification modules are integrated.

• IE interfaces
• /
• v.14 no.2
• /
• pp.134-139
• /
• 2001

This paper describes an automatic design system for the parts that compose the power transmission. Power transmission is composed of shaft, gear, clutch, brake and housing. To design power transmission, there are many recurrent calculations and drawings needed with conventional design process. In this paper, we propose three dimensional automatic design system that reduce recurrent calculations and drawings. Developed system consists of two modules; 1) Design expert system module to assist determining design parameters of clutch, brake and gear. 2) Parametric modeling module to make three dimensional solid model automatically. The proposed system has been tested in the fields and found to be a useful system.

• Journal of KIBIM
• /
• v.12 no.1
• /
• pp.42-54
• /
• 2022

BIM facilitates data transparency and consistency through three-dimensional parametric modeling and promotes the accurate managing and sharing of project information. In Korea, however, BIM-based detailed design of architectural interior finishes required during the Construction Documents phase increases the burden on architectural firms due to frequent design changes and manual workload. Therefore, the purpose of this study was to establish rule-based modules using parametric modeling that automates repetitive tasks that occur during the detailed design of interior finishing. Interviews with practitioners were conducted to analyze the major finishing elements. Of these floors, walls, and ceilings, which were the most rudimentary and common items, were selected as the subjects of the study. The modules developed in this study have two functions. One is to create new finish types, and the other is the automatic modeling of new types into rooms. For these functions, parameters that belonged to each finish and room element in a BIM model were analyzed and valid parameters directly used for parametric modeling were derived. Then, based on these parameters, rule-based modules for three elements, I.e., floors, walls, and ceilings were constructed with Revit Dynamo, and the effectiveness of the modules was verified with a pilot test. In conclusion, this study suggested a series of processes for automatic finishing to improve the efficiency of BIM-based architectural detailed design of finishes and to contribute in solving the chronic problems occuring during current design processes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.7-15
• /
• 1995

An application-oriented approach to automatic pass schedule design in shape rolling was presented in this paper. The design approach and its related program are composed of several modules for input data, graphic display, data processing, calculation of design information, drawing of detailed pass shapes, database management and finite element analysis for design verification. The developed program was applied to automatic pass schedule design for a square-to-round bar shape rolling.

• Journal of the Korean Professional Engineers Association
• /
• v.33 no.4
• /
• pp.27-32
• /
• 2000

The automatic utility program in electrical facilities has specially developed to fulfill the needs of electric CAD designers . Designers had separately managed the designing factors such as design, estimates and calculation sheets . However, this automatic utility program produces calculation sheets and volume reports simultaneously while designed. The program also accumulates all data automatically in database in order to be utilized as the statistics and the design data for later project management. Moreover, it is easy for new and inexperienced users to access by using the standard electric symbol libraries and utility modules.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.1
• /
• pp.14-19
• /
• 2002

This paper describes an automatic parts design system for gears, brake, and clutch. These parts are important components of the power transmission assembly. In conventional design process, the design of power transmission requires a number of recurrent calculations and drawings. In this paper, we propose a three-dimensional automatic design system that reduces the number of recurrent calculations and drawings. The system consists of three modules for designing gear, brake, and clutch. The proposed system has been applied to develop a transmission of forklift truck and shown to be a useful system.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.3
• /
• pp.50-54
• /
• 2001

Manufacturing is characterized by increasing product variety and technical complexity, decreasing levels of demand, expanding global competition and declining profitability of organizations. To survive in such a complex environment, development of the automatic design system into design and manufacturing can be introduced to increase the flexibility and adaptability to markets. This paper presents the development of an automatic water-gate design system that composed of a main program and three modules, and was programmed by AutoLISP language under AutoCAD system. The devel-oped system is capable of generating water-gate design automatically according to input data as customer requirement.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.52-59
• /
• 2004

In this paper, the automatic system generation algorithm based on the element combination algorithm discussed in the first part of this paper for designing an arbitrary type of the automatic transmissions is proposed. The powertrain design software using these algorithms is developed. This automotive powertrain design software with user-friendly graphic user interface has two main modules. The first module, the automatic power flow generation module, is already discussed in the previous paper. The second module dealing with the automatic system generation algorithm is discussed in this paper. The power-flow simulation software fur the arbitrary type of powertrain is then developed. The simulation and experimental results of the vehicle equipped with two planetary gear type automatic transmission are compared to validate the proposed algorithms and developed software. The simulation results demonstrate the good agreement with the experimental results.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.3-9
• /
• 2008

Recently, the plant industries are being activated and plant control systems use various technologies. Because the optimized design for the plants is very important for the reducing of operation and maintenance costs, automatic control systems become more important. Plant control systems consist of the master controller, the plant networks, the programming environment for engineering, monitoring software and the field devices. The control systems should have reliability, availability and safety. Modular architecture of hardware and software makes flexible configuration of the control systems. Each component should have diagnostic functions. It follows industrial standards and makes open systems. Open systems increase accessibility against the data which is distributed in the plants. The controllers including processor and communication modules use the up-to-date technology. They have real time and fault tolerant function by duplicating processors or networks. It also enables to make the distributed control systems. The distributed architecture makes more scalable main control system. Automatic control systems can be operated with better performance. In this paper, we analyzed the requirements of the seawater desalination plants and made some consideration facts for developing the optimized controller. Also we described the design concept of the main controller, which consists of several modules. We should validate and complement the design for the reliability and better performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.127-132
• /
• 2001

An automatic design system for a hydraulic gate has been developed to cut down the time for the design calculation and to optimize its design. It is oriented to the radial gate which is the simplest, most reliable, least expensive and most widely used hydraulic gate. This system is composed of data input, strength computation and result display modules with databases of the properties of components and materials. In this development, the existing intricate design procedure has been changed to the straightforward procedure without assumption of weight. With this code, the design time of the radial gate could be reduced below one thirtieth in comparison with manual work and the optimum design could be accomplished easily.