• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.3 s.234
• /
• pp.409-416
• /
• 2005

We need to develop a on-line thermal performance analysis system for nuclear power plant to determine performance status and heat rate of turbine cycle. We have developed PERUPS(PERformance Upgrade System) to aid the effective performance analysis of turbine cycle. Procedures of performance calculation are improved using several adaptations from standard calculation algorithms based on PTC(Performance Test Code). Robustness in the on-line performance analysis is increased by verification & validation scheme for measured input data. The system also provides useful web interfaces for performance analysis such as graphic heat balance of turbine cycle and components, turbine expansion lines, automatic generation of analysis report. The system was successfully applied for YongGwang nuclear plant unit #3,4.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1387-1389
• /
• 2000

Railway signalling system is required to be high safety against collision, derailment and collision at level crossing and to be high availability. The signalling system is usually divided into automatic train control, interlocking and centralized traffic control systems and each system must be high fail safe and availability. This study focused on reliability calculation of vital systems in train control system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.01a
• /
• pp.125-126
• /
• 2018

최근 대형마트 측에서는 계산대의 지연 시간 문제를 해결하기 위해 셀프 계산대라는 방식을 도입했지만 사용하는데 번거로운 점과 사용과정의 어려움을 느끼는 소비자들이 많아서 이 또한 근본적인 문제를 해결해주지 못하고 있는 실정이다. 본 논문은 이러한 문제점들을 해결하기 위해 자동화 계산이 가능한 스마트 카트를 제작하고자 한다. 스마트 카트를 도입함으로써 마트에서의 번거로운 과정과 대기시간의 지연으로 인해 생기는 소비자들의 불만을 해결해 주고자 한다. 또한 소비자의 빠른 순환으로 인해 마트의 이윤을 얻어 줄 수 있는 자동화 계산이 가능한 스마트 카트를 제작하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.830-833
• /
• 2014

This paper proposes dynamic constraint parameter to filter out degenerate configurations (i.e. set of collinear or adjacent features) in RANSAC algorithm. We define five different groups of image based on the feature distribution pattern. We apply the same linear and distance constraints for every image, but we use different constraint parameter for every group, which will affect the filtering result. An evaluation is done by comparing the proposed dynamic CS-RANSAC algorithm with the classic RANSAC and regular CS-RANSAC algorithms in the calculation of a homography matrix. The experimental results show that dynamic CS-RANSAC algorithm provides the lowest error rate compared to the other two algorithms.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1436-1443
• /
• 2019

A fast gamma-ray dose rate assessment method for complex geometries based on stylized model reconstruction and point-kernel method is proposed in this paper. The complex three-dimensional (3D) geometries are imported as a 3DS format file from 3dsMax software with material and radiometric attributes. Based on 3D stylized model reconstruction of solid mesh, the 3D-geometrical solids are automatically converted into stylized models. In point-kernel calculation, the stylized source models are divided into point kernels and the mean free paths (mfp) are calculated by the intersections between shield stylized models and tracing ray. Compared with MCNP, the proposed method can implement complex 3D geometries visually, and the dose rate calculation is accurate and fast.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.375-381
• /
• 2003

The studies on automatic ship collision avoidance system, which have been carried out last 10 years, are facing on new situation due to newly developed high technology such as computer and other information system. It was almost impossible to make it used in real navigation 3-4 years ago because of the absence of the tool to get other ship's information, however recently developed technology suggests new possibility. This study is carried out to develop the algorithm of automatic ship collision support system. The NOMOTO ship's mathematic model is adopted in simulation for its simplicity. The fuzzy reason rules are used for course-keeping system and for the calculation of Collision Risk using TCPA/DCPA. Moreover ‘encounter type’ between two ships is analyzed based on Regulations for Preventing Collisions at Sea and collision avoidance action is suggested. Some situations are simulated to verity the developed algorithm and appropriate avoidance action is shown in the simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.1910-1915
• /
• 2008

The load analysis for the distribution system and facilities has relied on measurement equipment. Moreover, load monitoring incurs huge costs in terms of installation and maintenance. This paper presents a new model to analyze wherein facilities load under a feeder every 15 minutes using meter reading data that can be obtained from a power consumer every 15 minute or a month even without setting up any measuring equipment. After the data warehouse is constructed by interfacing the legacy system required for the load calculation, the relationship between the distribution system and the power consumer is established. Once the load pattern is forecasted by applying clustering and classification algorithm of temporal data mining techniques for the power customer who is not involved in Automatic Meter Reading(AMR), a single-line diagram per feeder is created, and power flow calculation is executed. The calculation result is analyzed using various temporal and spatial analysis methods such as Internet Geographic Information System(GIS), single-line diagram, and Online Analytical Processing (OLAP).

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.2
• /
• pp.173-182
• /
• 2014

The structured singular value (${\mu}$) analysis based method has many advantages for the robust stability analysis of missiles with uncertain parameters. Nevertheless, the present linear fractional transformation (LFT) modeling process, which is the basis of ${\mu}$ analysis, is complex, and not suitable for automatic implementation; on the other hand, ${\mu}$ analysis requires a large amount of computation, which is a burden for large-scale application. A constructive procedure, which is computationally more efficient, and which may lead to a lower order realization than existing algorithms, is proposed for LFT modeling. To reduce the calculation burden, an analysis method is developed, based on skew ${\mu}$. On this basis, calculation of the supremum of ${\mu}$ over a fixed frequency range converts into a single skew ${\mu}$ value calculation. Two algorithms are given, to calculate the upper and lower bounds of skew ${\mu}$, respectively. The validity of the proposed method is verified through robust stability analysis of a missile with real uncertain parameters.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.2015-2021
• /
• 2000

In order to evaluate the integrity of nuclear power plant components, the analysis based on fracture mechanics is crucial. For this purpose, finite element method is popularly used to obtain J-integral. However, it is time consuming to design the finite element model of a cracked structure. Also, the J-integral should be verified by alternative methods since it may differ depending on the calculation method. The objective of this paper is to develop a three-dimensional elastic-plastic J-integral analysis system which is named as EPAS program. The EPAS program consists of an automatic mesh generator for a through-wall crack and a surface crack, a solver based on ABAQUS program, and a J-integral calculation program which provides DI (Domain Integral) and EDI (Equivalent Domain Integral) based J-integral calculation. Using the EPAS program, an optimized finite element model for a cracked structure can be generated and corresponding J-integral can be obtained subsequently.

• Tunnel and Underground Space
• /
• v.11 no.2
• /
• pp.146-155
• /
• 2001

An inverse calculation method to obtain sectional forces, axial force and flexural moment of a tunnel concrete lining was developed by utilizing convergence measurements acquired at the maintenance stage. To monitor the behavior of the lining, DOCS system was applied to a subway tunnel section. The method was proved to be effective, yielding the same results as measured forces of buried instruments. Many effects such as vibration of sensors, vibration due to test train operation, the variation of temperature and high voltage were checked and a new management scheme for tunnel maintenance was proposed.