• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.592-595
• /
• 2008

본 논문은 모바일 TFT-LCD 구동 집 회로와 임베디드 소프트웨어를 이용한 자동 화질 레지스터 최적화시스템을 제안한다. 이러한 시스템은 LCD모듈의 중요한 화질 평가 요소인 평균 감마 오차, 감마 조정 시간, 플리커 잡음 및 명암비 등을 최적화하기 위해 모바일 LCD구동 집적회로 내의 감마조정 레지스터들과 전압 설정 레지스터 들을 자동적으로 제어한다. 개발된 알고리즘과 임베디드 소프트웨어는 거의 모든 유형의 LCD모듈에 적용 가능하다. 개발된 화질 최적화 시스템은 측정 대상이 되는 모듈 (MUT, LCD 모듈), 제어 프로그램, 휘도 측정용 멀티미디어 디스플레이 측정기 및 인터페이스용 제어 보드로 구성되어 있다. 제어 보드는 DSP와 FPGA로 구성 되 어 있고, RGB 및 CPU 인터페이스를 지원한다.

• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2002년도 추계국제학술대회
• /
• pp.156-156
• /
• 2002

The goal of this study is to develop a biomarker used in monitoring abnormal behaviors of Japanese medaka (Oryzias latipes) as a model organism caused by hazardous chemicals that are toxic and persistent in the ecosystem. A widely used insecticide, diazinon (O, O-diethyl O- (2-isopropyl-4-methyl-6-pyrimidinyl) phosphorothioate), is highly neurotoxic to fish, and it is also well known that it causes vertebral malformation and behavioral changes of fish at relatively low concentrations. The fish behaviors were observed on a real time basis using an image processing and automatic data acquisition system. The genes potentially involved in the abnormal behaviors were cloned using suppression subtractive hybridization (SSH) technique. The untreated individuals showed common behavioral characteristics. When the test fish was affected by diazinon at a concentration of 0.1 and 1 ppm, some specific patterns were observed in its behavioral activity and locomotive tracks. The typical patterns were enhanced surfacing activity, opercular movement, erratic movement, tremors and convulsions as reported previously. The number of genes up-regulated tty diazinon treatment were 97 which includes 27 of unknown genes. The number of down-regulated genes were 99 including 60 of unknown genes. These gene expression patterns will be analyzed by the artificial neural networks such as self organization map (SOM) and multilayer perceptron (MLP), revealing the role of genes responsible for the behaviors. These results may provide molecular biological and neurobehavioral bases of a biomonitoring system for diazinon using a model organism such as fish.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.219-226
• /
• 2000

본 논문에서는 WLL 광대역 코드분할 다원 접속(Wideband CDMA) 시스템 기지국용 If(Intermediate Frequency) 송수신기의 설계 및 구현에 대하여 고찰하였다. 제작된 IF 송수신기는 송신단, 수신단, 국부발진기로 구성되었다. 처리되는 신호의 대역폭을 10MHz로 고려하여 IF 반송파는 40MHz로 설계하였으며, 측정 결과 IF 송신단의 출력 전력은 기저 대역 입력이 -10dBm $\pm3dB$ 일 때 40MHz에서 -5dBm $\pm3dB$, 수신단의 출력 전력은 IF 대역 입력이 -5dBm $\pm3dB$ 일 때 기저대역에서 -10dBm $\pm3dB$의 특성을 얻었다. 또한, 자동이득 조절 루프는 -7dBm에서 +2dBm까지의 9dB 입력 범위에서 동작하여 약 2dBm의 일정한 레벨을 출력시켰고, 1MHz부터 5MHz까지의 신호를 스윕시켜 IF시스템 내에서의 위상 변화를 관찰한 결과 위상 왜곡이 매우 적어 데이터 통신시스템에 적용이 가능함을 보였다.

• 대한원격탐사학회지
• /
• 제24권5호
• /
• pp.483-496
• /
• 2008

Qualified ground control points (GCPs) are required to construct a digital elevation model (DEM) from a pushbroom stereo pair. An inverse geolocation algorithm for extracting GCPs from ERS SAR data and the SRTM DEM was recently developed. However, not all GCPs established by this method are accurate enough for direct application to the geometric correction of pushbroom images such as SPOT, IRS, etc, and thus a method for selecting and removing inaccurate points from the sets of GCPs is needed. In this study, we propose a method for evaluating GCP accuracy and winnowing sets of GCPs through orientation modeling of pushbroom image and validate performance of this method using SPOT stereo pair of Daejon City. It has been found that the statistical distribution of GCP positional errors is approximately Gaussian without bias, and that the residual errors estimated by orientation modeling have a linear relationship with the positional errors. Inaccurate GCPs have large positional errors and can be iteratively eliminated by thresholding the residual errors. Forty-one GCPs were initially extracted for the test, with mean the positional error values of 25.6m, 2.5m and -6.1m in the X-, Y- and Z-directions, respectively, and standard deviations of 62.4m, 37.6m and 15.0m. Twenty-one GCPs were eliminated by the proposed method, resulting in the standard deviations of the positional errors of the 20 final GCPs being reduced to 13.9m, 8.5m and 7.5m in the X-, Y- and Z-directions, respectively. Orientation modeling of the SPOT stereo pair was performed using the 20 GCPs, and the model was checked against 15 map-based points. The root mean square errors (RMSEs) of the model were 10.4m, 7.1m and 12.1m in X-, Y- and Z-directions, respectively. A SPOT DEM with a 20m ground resolution was successfully constructed using a automatic matching procedure.

• 한국정보전자통신기술학회논문지
• /
• 제14권5호
• /
• pp.369-374
• /
• 2021

최근에 건설되는 아파트는 주방이 빌트인 방식으로 만들어지므로 가스 호스가 싱크대 내부에 보이지 않게 만들어지므로 가스가 누출될 경우 싱크대 내부에 축적되어 가스 폭발로 이어질 수 있는 위험한 방식이다. 본 연구에서는 가스레인지와 중간밸브 사이에 연결된 호스가 싱크대 내부에 있어 가스 누출 검사를 할 수 없는 구조로 되어 있어 압력센서를 이용하여 가스누출을 검사를 쉽게 할 수 있는 밸브 시스템 연구하였다. 압력 측정 방법은 중간밸브와 가스레인지를 연결하는 호스의 압력을 측정하여 I2C통신 방식으로 데이터를 수집·분석 할 수 있도록 진행하였다. 또한 가정에 공급되는 가스압력계산은 대기압력에 가스계량기의 입구에서 가스게이지 압력 평균값 22.46mbar를 더 한 값으로 계산된 것에 대한 대기 압력 오차에 대한 규명 및 미세한 가스 누출 감지를 할 수 있도록 밸브 시스템을 개발하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.43-50
• /
• 2022

The aim of this study was to conduct basic research on the development of a dual-clutch transmission(DCT) and automatic transmission for agricultural tractors. The DCT layout and the DCT simulation model were developed using commercial software. Power transmission efficiency of the DCT and component power loss were analyzed to verify the developed simulation model. Power loss analysis of the components was conducted according to previous studies and ISO(International Organization for Standardization) standards. The power transmission efficiency of the DCT simulation model was 68.4-91.5% according to the gear range. The power loss in the gear, bearing, and clutch DCT system components was 0.75-1.49 kW, 0.77-2.99 kW, and 5.24-10.52 kW, respectively. The developed simulation model not include the rear axle, differential gear, final reduction gear. Therefore actual power transmission efficiency of DCT will be decreased. In a future study, an actual DCT can be developed through the simulation model in this study, and optimization design of DCT can be possible by comparing simulation results and actual vehicle test.

• 한국동물위생학회지
• /
• 제46권1호
• /
• pp.29-34
• /
• 2023

Mycobacterium tuberculosis complex (M. tuberculosis complex) is a causative agent of contagious chronic disease in a wide range of mammalian hosts, mainly cattle, goat, pigs, wildlife, and humans. The definite diagnosis of tuberculosis is made based on culture of M. tuberculosis, but it takes a long time. In the present study, we analyzed whether the detection time of M. tuberculosis could be reduced when cultured in the medium containing the culture-promoting ingredients-107 (CPI-107) using the BacT/Alert 3D system, an automatic culture system. The time to detection (TTD) tended to decrease as the added concentration of CPI-107 increase. In the case of low numbers of M. tuberculosis, it decreased by 21.0% at 1.2 mg/mL of CPI-107 and by 15.9% in the case of high numbers of M. tuberculosis. In the culture using clinically isolated M. tuberculosis strains, the shortening of the culture time by CPI was more evident. In conclusion, the detection time of M. tuberculosis was shortened in the medium added with CPI-107, and this could be used for isolation, culture and drug susceptibility test of M. tuberculosis.

• 한국항공우주학회지
• /
• 제48권6호
• /
• pp.401-410
• /
• 2020

본 연구에서는 전술급 무인항공기의 GPS 신호간섭 및 재밍(Jamming)/기만(Spoofing) 공격 시 위치항법 정보의 취약성을 보완하기 위해 개발한 영상정보 기반 실시간 비행체 위치보정 시스템을 기술하고자 한다. 전술급 무인항공기는 GPS 두절 시 항법장비가 GPS/INS 통합항법에서 DR/AHRS 모드로 전환하여 자동비행이 가능하나, 위치 항법의 경우 대기속도 및 방위각을 활용한 추측항법(DR, Dead Reckoning)으로 인해 시간이 지나면 오차가 누적되어 비행체 위치 파악 및 데이터링크 안테나 자동추적이 제한되는 등의 문제점을 갖고 있다. 이러한 위치 오차의 누적을 최소화하기 위해 영상감지기를 이용한 특정지역 위치보정점을 바탕으로 비행체 자세, 영상감지기 방위각/고각 및 수치지도 데이터(DTED)를 활용하여 비행체 위치를 계산하고 이를 실시간으로 항법장비에 보정하는 시스템을 개발하였다. 또한 GPS 시뮬레이터를 이용한 지상시험과 추측항법 모드의 비행시험으로 영상정보 기반 실시간 비행체 위치보정 시스템의 기능 및 성능을 검증하였다.

• 간호행정학회지
• /
• 제5권2호
• /
• pp.209-224
• /
• 1999

I have practiced this reserch for the purpose of proposition of basic data for amendment and addition of computer system after I surveyed the degree of abilities and satisfaction on the computerization in nursing\ practice. Subjects were collected from September 1 to September 30, 1998. Study subjects are 151 clinical nurses who are working at university hospital in Chonbuk area. Study instrument consists of 116 questionnaire which was developed by Kim H. K(1998). The data were analized number, mean ,t-test, ANOVA by using SPSS. The study results are as follows: 1. Most of the nurses who answered the questions were educated computerizing(96%). The abilities of computer program utilities were the most in inputting data(74%). The program nurses wanted computerizing education was wordprocess, dealing internet and statistics. 2. As for applying parts of computer system in nursing, the most nurses were Dr's order check (96%), treatment activity(91.4%), medication(89.4%), lab. test(87 .4%), transfering department(85.4%), transfering room(79.5%), diet(71.8%), discharge (70.2%), Barcord Sticker(70.2%) , reservation(62.2%) in order that were all conected order system mutually to other part. It showed that computer system was not applied for treating the original nursing work such as nursing record (13%), duty scheduling(6.0%) , nursing process(4.6%) , Q.I(1.3%), nursing research(1.3%), education(1.3%), 3. As for the benefit when computer system is applied for, the most respondence was promptness of work and convenience(90.6%) , exactness of work (82.8%), offering information exactily and efficiently(36.3%), offering good quality of nursing (6.0%) in order. 4. The degree of contentment on computerizing in nursing practice showed average 3.24%. The best marking item is that they are eager to participate in the computer education. Next, the automatic output of label and giving the number automatically is to prevent loss and mentioned items of patient registration from being changed(3.95) and to prevent mistakes possibly happening because of doctor's difficult order(3.85). 5. The problems which may happen to in nurses' utilization of computerization for the nursing practice showed average 3.18. The most problem is that the practice may stop because of the problem of computer itself(3.67), and the next, the indication of act can be imperfect(3.66) , manual training may overlap because of incomplete computerization (3.60), practical education for the computerizing is lack(3.41), and the computer literate nurses are lack(3.40) . 6. Study subject's contentment by age was significant difference(F=3.10,P=0.0119). Study subject's contentment by job posision was significant difference(F=6.001P=0.0034) I will propose the following according to the above results. The domain of original nursing practice is urgernt. Manual and indication of act should be made before long in computer obstacle. Nursing department should support the nurses so that they could receive the education needed for the nurses themselves.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.979-984
• /
• 2001

As a preceding process for developing design technology and establishing operation technology, the design procedure of the SCR(Selective Catalytic Reduction) pilot plant that can handle $1,000Nm^{3}/hr$ of flue gas was reported in this paper. And we also considered several factors that might cause abnormality of the plant in the designing process. The plant was designed and fabricated to test the $DeNO_{x}$ performances in variable operating conditions in the range of $3,000{\sim}36,000hr^{-1}/hr$ in space velocities, $1.67{\sim}6\;m/s$ in linear velocities, $200{\sim}500^{\circ}C$ temperatures, $300{\sim}1,000Nm^{3}/hr$ flow rates, and $0{\sim}1.4:1\;NH_{3}/NO$ ratios. In order to maintain the flow uniformity, the guide vanes and flow straightener were designed and constructed in the plant. The SCR pilot plant can be operated by the automatic control system, which enable to obtain performance data in real time and to set up the operating technology. The catalyst reactor consists of 4 catalyst layers and surface area of each layer can be adjusted to be of small size. Arrangement of catalysts per layer is $3{\times}6$ with the catalyst dimensions of $150{\times}150{\times}500mm(L{\times}W{\times}H)$.