• 한국군사과학기술학회지
• /
• 제18권1호
• /
• pp.1-7
• /
• 2015

In this paper, we have described target positioning of automatic survey system. Target positioning error analysis shows target positioning errors are mainly dependent on the vertical angle of the triangle configured by target and two measurement points. Suggested target positioning error formula are confirmed by simulation using the Gaussian distribution.

• 한국산업보건학회지
• /
• 제17권3호
• /
• pp.254-260
• /
• 2007

Trichloroethylene(TCE) is widely used as a degreasing solvent in workplaces. TCE is primarily toxic to the nervous system, however, systemic disorder like Stevens-Johnson syndrome has been recently reported in small-scale factories, where the government has had limited information of chemical use. A survey was performed to investigate the actual condition of using TCE and to provide practical information to occupational health service agencies and professionals. This survey was carried out on 103 factories out of 430 factories which were conducted periodic work environment measurement for TCE. Degreasing was the most popular reason for using TCE in Korea, which reached to 94%. TCE was also used as a solvent for rubber in the coating or molding process, and adhesives in the bonding process. Metal fabrication was the most common as 23%, followed by assembling automobile parts (17%), and machinery (12%). Workers exposed to TCE during full-shift were 52% while 48% were exposed during short period of the shift or intermittently. Manual or semi-automatic work occupied 87% while automatic work was just 13%. Though automatic work by a closed system was generally lower exposed to TCE, compared to manual work, it can cause a high exposure when the maintenance system is improper. Semi-automatic work especially like open-top degreasing process can cause a high exposure when local exhaust system with condensing and refrigerating coils in the degreaser does not work well. In conclusion, the survey showed nationwide status of TCE exposure in various aspects. It can be used to monitor workplaces and workers exposed to TCE to prevent occupational diseases.

• 대한교통학회지
• /
• 제32권5호
• /
• pp.452-461
• /
• 2014

기존 주차조사는 광범위한 조사지역을 대상으로 조사원이 직접 주차차량의 번호판을 확인하는 방식으로 기동성의 저하, 조사와 입력의 이원화로 인한 입력오류, 많은 조사시간과 비용이 소요되는 단점을 가지고 있었다. 따라서 본 연구에서는 기존 조사원에 의한 주차조사의 단점을 극복하기 위해 최근 상용화된 고성능 영상분석장비, 위성측량장비, 적외선 조명 등을 이용하여 자동주차조사를 위한 방법에 관한 연구를 수행하였으며 본 연구결과 개발된 자동주차조사 방법을 이용하여 조사된 데이터를 수정, 저장, 분석 및 출력이 가능한 주차분석 소프트웨어를 개발하였다. 장비를 이용한 자동주차조사 시 조사차량의 주행속도, 영상분석장비의 촬영각도, 주차차량 상호간 차간간격, 조사차량과 주차차량의 이격거리 등에 의해 조사의 정밀도가 영향을 받는 것으로 나타나 장비를 이용한 자동주차조사의 정확도를 향상시키기 위해 실험을 통해 각 요소별 최적조합을 도출하였다. 또한 기존 주차조사 데이터가 체계적으로 저장, 관리되지 못하고 있는 문제점을 극복하고 주자정책 수립을 지원하기 위한 주차분석을 지원하기 위한 주차분석 소프트웨어를 개발하였다.

• 한국농공학회논문집
• /
• 제52권6호
• /
• pp.9-17
• /
• 2010

In this paper, an automatic cruise system of unmanned boat was developed for surveying water depth in reservoir using GIS (geographic information system)-GPS (global positioning system) Technologies. the automatic cruise system consisted of an automatic path generation program (APGP) and an automatic boat control program (ABCP). A grid processing method with $3{\times}3$ roving window in GIS function was used to develop the APGP. For development of the ABCP, GPS and its coordinate calculation technique were introduced. The developed system was tested to verify the applicability for a sample reservoir, Misan reservoir located on Ansan city of Kyunggi province. From the test results, this study found the APGP generated cruise path automatically according to input condition on grid size of 5 m, 10 m, and 20 m, as well as, the ABCP also tracked well the cruise paths with high position accuracy. Another verification result on surveying time for 20 ha of water area also showed that the new system could survey water depth of reservoir quickly, including very high quality of spatial resolution.

• Advances in nano research
• /
• 제12권2호
• /
• pp.197-212
• /
• 2022

The purpose of this study is to develop an automatic software system for bone age evaluation and to evaluate its accuracy in testing and feasibility in clinical practice. 20394 left-hand radiographs of healthy children (2-18 years old) were collected from China Skeletal Development Survey data of 1998 and China Skeletal Development Survey data of 2005. Three experienced radiologists and China-05 standard maker jointly evaluate the stages of bone development and the reference bone age was determined by consensus. 1020 from 20394 radiographs were picked randomly as test set and the remaining 19374 radiographs as training set and validation set. Accuracy of the automatic software system for bone age assessment is evaluated in test set and two clinical test sets. Compared with the reference standard, the automatic software system based on RUS-CHN for bone age assessment has a 0.04 years old mean difference, ±0.40 years old in 95% confidence interval by single reading, a 85.6% percentage agreement of ratings, a 93.7% bone age accuracy rate, 0.17 years old of MAD, 0.29 years old of RMS; Compared with the reference standard, the automatic software system based on TW3-C RUS has a 0.04 years old mean difference, a ±0.38 years old in 95% confidence interval by single reading, a 90.9% percentage agreement of ratings, a 93.2% bone age accuracy rate, a 0.16 years of MAD, and a 0.28 years of RMS. Automatic software system, AI-China-05 showed reliably accuracy in bone age estimation and steady determination in different clinical test sets.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.753-756
• /
• 2001

선박의 자동식별 시스템(Automatic Identification System(AIS))은 다중접속 방법으로서 SOTDMA를 채택하고 있다. SOTDMA 시스템은 Aloha 영역에서 슬롯 재사용으로부터 기인하는 Gaussian Minimum Shift Keying(GMSK) Co-Channel Interference(CCI)에 의해서 시스템 성능이 저하된다 이 논문에서는 CCI를 제거할 수 있는 여러 가지 방법을 소개하고 비교 분석하여 향후 선박의 자동식별 시스템에 적용 가능한 CCI 제거기법 개발 방안에 대해서 논하도록 하겠다.

• 드라이브 ㆍ 컨트롤
• /
• 제10권4호
• /
• pp.7-13
• /
• 2013

A tractor is a farm vehicle that is designed to provide a high tractive effort at low speed. It is used for versatile agricultural tasks such as hauling a trailer, tillage, mowing and construction work. As the intensity of work increases, tractors equipped with automatic transmission become popular due to the work convenience. Though manual and power shuttle transmissions are produced by domestic corporations, development for full-automatic power shift transmissions has never been challenged, and so related technology level is quite low. This paper gives a survey of the automatic transmissions from advanced foreign company, which includes layout of gear train, the way hydraulics controls clutches and brakes, electronic control system. The results are expected to be utilized as a basis in the development of original power train design for tractor.

• 패션비즈니스
• /
• 제1권2호
• /
• pp.46-54
• /
• 1997

The purpose of this study is to understand women's wear manufacturing industries. First, the study was to investigate the present production systems and how much the automatic facility are by comparing them. This study enhanced more efficient, stable, and suitable work line. This intern will direct the way in which automatic facilities will be created. Second, through this study on the general character of the inspectors, the ratio of impaired goods, and the reasons for unsatisfactory goods, I intended to find out a way to decrease the impaired goods and to produce competitive and high quality goods. The results of the survey can be summarized as follows; 1. The result of the research on the automatic industrial facilities shows that the majority of the factories (77.4%) are 40% below the automatic facility rate. The reasons for this according to order are that was a deficit in money, no reason for expensive machines, and lack of the technique and the number of workers required to handle the machines. 2. At this time, the most required equipments are shown according to its importance; automatic sewing machine, automatic cutting machine, automatic spreading machine, and finishing & pressing machine. So in the women's wear manufacturing industries, they think that they need more automatic cutting machine, automatic spreading machine in the cutting field rather than high price automatic machine in the sewing field such as pattern former, pocket welting, automatic sleeve connecting machine and automatic label connecting machine. 3. The result of the research in the goods quality shows that the average impaired rate is 12.7% at the first inspection. In addition the average rate for complete impaired rate is 1.52%. The line system shows that it has a impaired rate that is double the rate of the pair system. Because of this, the industries plan to combine the line system and pair system to create an improved and suitable production system which can boost the quality and productivity of the goods. 4. The fabric is the main point of the impaired goods. The factors of the impaired goods in manufacturing are the lack of mental abilities of the worker, impaired fabrics and a lack of cooperation in the working system. Furthermore, there is a lack of technique for new material. 5. To prohibit impaired goods in manufacturing, there need to be a way to educate the workers and to enhance the workers' mind on the productive goods. Also there need to increase in the investments of automatic production machines. Finally there need to be a standardized working line. Therefore, there need to be an improvement on the management of the production of goods, the development of technique and an increase in the education for the workers, with this there will be a decrease in impaired goods, and an increase in better quality of goods to enforce the domestic apparel industries.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.828-831
• /
• 1996

Radiation monitoring system is needed at nuclear power plant and nuclear facility. Manual survey techniques are commonly used, but they are time consuming and somewhat inaccurate. Automatic radiation surveys are very important because it provides significant savings in men-rem and wages. Unmanned, remote automatic radiation measurement system should be small and light-weighted in order to mount on robotic system. The system we have developed consists of detection parts, signal processing part, interface, and software part. Position information is provided by using of a collimator. The measurement process is achieved by the scanning of detector and image processing techniques are used to display radiation levels. We designed collimators, detectors, signal processing circuit, and constructed prototype system. The goal of this system is the mapping of camera image and radiation level distribution.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.156-159
• /
• 2001

Recently, side scan sonar system has been developed and operated to survey cable laying, sunken bodies, geometry of sea bottom and so on. It uses the acoustic signals, which are emitted from two transducer arrays, left and right sides, to get geometric information of the specified area. This system consists of transceiver board, towed body, deck unit and GPS receiver. The transceiver board, nested in a watertight canister, controls the transmitting and receiving of the acoustic pulses from transducer arrays. After receiving the scattered signals, it processes BP(Band Pass) filtering, AGC(Automatic Gain Control), TVG(Time Varying Gain) and Heterodyne. The deck init has the signal processing part, A/D converter, power supplier, and real-time monitoring part. The towed body has been designed to satisfy the optimal hydrodynamic behavior during towing, In this paper, brief introductions on the design theory of transceiving part and some results from the field which have been operated recently will be introduced.