• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.6
• /
• pp.909-921
• /
• 1995

The objective of this paper is to develop an algorithm for a real-time automatic fingerprint recognition system. The algorithm employs the Fast Fourier Transform (FFT) in determining the directions of ridges in fingerprint images, and utilizes statistical information in recognizing the fingerprints. The information used in fingerprint recognition is based on the dircetions along ridge curves and characteristic points such as core points and delta points. In order to find ridge directions, the algorithm applies the FFT to a small block of the size 8x8 pixels, and decides the directions by interpreting the resulted Fourier spectrum. By using the FFT, the algorithm does not require conventional preprocessing procedures such as smoothing, binarization, thinning, and restorationl. Finally, in matching two fingerprint images, the algorithm searches and compares two kinds of feature blocks, one as the blocks where the dircetions cannot be defined from the Fourier spectrum, and the other as the blocks where the changes of directions become abrupt. The proposed algorithm has been implemented on a SunSparc-2 workstation under the Open Window environment. In the experiment, the proposed algorithm has been applied to a set of fingerprint images obtained by a prism system. The result has shown that while the rate of Type II error - Incorrect recognition of two different fingerprints as the identical fingerprints - is held at 0.0%, the rate of Type I error - Incorrect recognition of two identical fingerprints as the different ones - is 2.2%.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.211-214
• /
• 2002

Automatic video partitioning is the first step for content-based indexing and retrieval of video data. In this paper, an efficient algorithm for scene change detection is proposed, where cumulative histogram and edge information are utilized. Experimental results have shown the effectiveness of the proposed algorithm.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.4
• /
• pp.15-26
• /
• 2019

In recent years, researchers are increasingly trying to use BIM-based 3D models for BIM nD design such as 4D (3D + Time) and 5D (4D + Cost). However, there are still many problems in efficiently using process management based on the BIM information created at each design stage. Therefore, this study proposes a method to automate 4D and 5D design support in each design stage by using BIM-based Dynamo algorithm. To do this, I implemented an algorithm that can automatically input the process information needed for 4D and 5D by using Revit's Add-in program, Dynamo. In order to support the 4D design, the algorithm was created to enable automatic process simulation by synchronizing process simulation information (Excel file) through the Navisworks program, BIM software. The algorithm was created to automatically enable process simulation. And to support the 5D design, the algorithm was developed to enable automatic extraction of the information needed for mass production from the BIM model by utilizing the dynamo algorithm. Therefore, in order to verify the 4D and 5D design support algorithms, we verified the applicability through consultation with related workers and experts. As a result, it has been demonstrated that it is possible to manage information about process information and to quickly extract information from design and design changes. In addition, BIM data can be used to manage and input the necessary process information in 4D and 5D, which is advantageous for shortening construction time and cost. This study will make it easy to improve design quality and manage design information, and will be the foundation for future building automation research.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.10
• /
• pp.15-21
• /
• 2015

In this paper, we propose a stable automatic signature verification algorithm applicable to various smart devices. The proposed algorithm uses real and forgery data all together, which can improve the verification rate dramatically. As a tool for signature acquisition in a smart device, two applications, one using touch with a finger and the other using a pressure-sensing-stylus pen, are developed. The verification core is based on SVM and some modifications are made to include the characteristics of signatures. As shown in experimental results, the minimum error rate was 1.84% in the SVM based method, which can easily defeat 4.38% error rate with the previous parametric approach. Even more, 2.43% error rate was achieved with the features excluding pressure-related features, better than the previous approach including pressure-related features and only about 0.6% more error than the best result, which means that the proposed algorithm can be applied to a smart device with or without pressure-sensing-stylus pens and used for security purposes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.874-881
• /
• 2008

This paper presents an automatic frequency control algorithm for RTLS DS-SS modem based on the standard of ISO/IEC 24730-2. The presented automatic frequency control algorithm consists of frequency acquisition mode and frequency tracking mode, and the frequency acquisition mode is divided into the angle estimation step for frequency offset estimation and the verification step for removing the angle ambiguity. In the angle estimation step, three different sub-bit angles are estimated according to the timing intervals, then the estimates are used to re move the angle ambiguity in the verification step. The theoretical analysis and the simulation results of the proposed frequency control algorithm are presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2409-2416
• /
• 2014

In this paper, an automatic recognition algorithm for linearly modulated signals like PSK, QAM under noncoherent asynchronous condition is proposed. Frequency, phase, and amplitude characteristics of digitally modulated signals are changed periodically. By using this characteristics, cyclic moments and higher order cumulants based features are utilized for the modulation recognition. Hierarchial decision tree method is used for high speed signal processing and totally 4 feature extraction parameters are used for modulation recognition. In the condition where the symbol number is 4,096, the recognition accuracy of the proposed algorithm is more than 95% at SNR 15dB. Also the proposed algorithm is effective to classify the signal which has carrier frequency and phase offset.

• Journal of the Society of Disaster Information
• /
• v.12 no.2
• /
• pp.181-188
• /
• 2016

Database construction of basic elements for displaying CCTV informations(the location, direction, distance, maximum distance, Tele mode angle view, Wide mode angle view, etc.) is conducted by complete survey about CCTV information in model area. Automatic mapping algorithm is suggested to schematize and visualize it on the basic of the investigated CCTV informations. In the result, the CCTV locations in partial areas are duplicated on about 11 percents. Duplicated ones among twelve CCTVs are total five. If the redesign of CCTV location and direction by displaying the CCTV informations based on the suggested algorithm is performed, it can be used as scientific explanations.

• Journal of Korean Library and Information Science Society
• /
• v.31 no.2
• /
• pp.279-302
• /
• 2000

This study is to develop a new automatic system for the Korean thesaurus browser by which we can automatically control all the processes of searching queries such as, representation, generation, extension and construction of searching strategy and feedback searching. The system in this study is programmed by Delphi 4.0(PASCAL) and consists of database system, automatic indexing, clustering technique, establishing and expressing thesaurus, and automatic information retrieval technique. The results proved by this system are as follows: 1)By using the new automatic thesaurus browser developed by the new algorithm, we can perform information retrieval, automatic indexing, clustering technique, establishing and expressing thesaurus, information retrieval technique, and retrieval feedback. Thus it turns out that even the beginner user can easily access special terms about the field of a specific subject. 2) The thesaurus browser in this paper has such merits as the easiness of establishing, the convenience of using, and the good results of information retrieval in terms of the rate of speed, degree, and regeneration. Thus, it t m out very pragmatic.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.85-96
• /
• 2006

This paper deal with a method for efficient placing 2 dimensional virtual labels on the view plane. The proposed method has suitable computational costs for realtime processing and it overcomes the local minima problem which is not solved in previous automatic label placement algorithms, and also it enhances readability by placing labels in less congestion area on the view plane. Background analysis must be considered for label placement. However previous works do not concern with this problem seriously. And furthermore, automatic label placement algorithm and background analysis algorithm have been studied separately in their own field. This paper proposed the background analysis method using background color and texture component to enhance readability, and it is the first research about analyzing the background of color image and applying it in automatic label placement field. This paper shown improved placement performance through combining automatic label placement algorithm and background analysis algorithm organically, and various experiments verified it.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.94-99
• /
• 2008

Segmentation for the region of nucleus in the image of uterine cervical cytodiagnosis is known as the most difficult and important part in the automatic cervical cancer recognition system. In this paper, the region of nucleus is extracted from an image of uterine cervical cytodiagnosis using the HSI model. The characteristics of the nucleus are extracted from the analysis of morphemetric features, densitometric features, colormetric features, and textural features based on the detected region of nucleus area. The classification criterion of a nucleus is defined according to the standard categories of the Bethesda system. The fuzzy C-means clustering algorithm is employed to the extracted nucleus and the results show that the proposed method is efficient in nucleus recognition and uterine cervical Pap-Smears extraction.