• Journal of Wind Energy
• /
• v.14 no.3
• /
• pp.14-24
• /
• 2023

The significance of renewable energy has been on the rise, as evidenced by the 3020 renewable energy plan and the 2050 carbon neutrality strategy, which seek to advance a low-carbon economy by implementing a power supply strategy centered around renewable energy sources. This study examines the wind resources on the west coast of South Korea and confirms the potential for wind power generation in the area. Wind speed data was collected from 22 automatic weather system stations and four light house automatic weather system stations provided by the Korea Meteorological Administration to evaluate potential sites for wind farms. Weibull distribution was used to analyze the wind data and calculate wind power density. Annual energy production and capacity factors were estimated for 15-20 MW-class large wind turbines through the height correction of observed wind speeds. These findings offer valuable information for selecting wind power generation sites, predicting economic feasibility, and determining optimal equipment capacity for future wind power generation sites in the region.

• Journal of Sensor Science and Technology
• /
• v.33 no.3
• /
• pp.179-184
• /
• 2024

In the car industry, welding is a fundamental linking technique used for joining components, such as steel, molds, and automobile parts. However, accurate inspection is required to test the reliability of the welding components. In this study, we investigate the detection of weld beads using 2D image processing in an automatic recognition system. The sample image is obtained using a 2D vision camera embedded in a lighting system, from where a portion of the bead is successfully extracted after image processing. In this process, the soot removal algorithm plays an important role in accurate weld bead detection, and adopts adaptive local gamma correction and gray color coordinates. Using this automatic recognition system, geometric parameters of the weld bead, such as its length, width, angle, and defect size can also be defined. Finally, on comparing the obtained data with the industrial standards, we can determine whether the weld bead is at an acceptable level or not.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.10
• /
• pp.881-886
• /
• 2013

Even though a multi-view camera system is able to capture multiple images at different viewpoints, the color distributions of captured multi-view images can be inconsistent. This problem decreases the quality of multi-view images and the performance of post-image processes. In this paper, we propose an improved polynomial model for effectively correcting the color inconsistency problem. This algorithm is fully automatic without any pre-process and considers occlusion regions of the multi-view image. We use the 5th order polynomial model to define a relative mapping curve between reference and source views. Sometimes the estimated curve is seriously distorted if the dynamic range of extracted correspondences is quite low. Therefore we additionally estimate the first order polynomial model for the bottom and top regions of the dynamic range. Afterwards, colors of the source view are modified via these models. The proposed algorithm shows the good subjective results and has better objective quality than the conventional color correction algorithms.

• Journal of KIISE:Software and Applications
• /
• v.37 no.9
• /
• pp.706-711
• /
• 2010

In the applications of a human speech interface, reducing the error rate in recognition is the one of the main research issues. Many previous studies attempted to correct errors using post-processing, which is dependent on a manually constructed corpus and correction patterns. We propose an automatically learnable post-processing method that is independent of the characteristics of both the domain and the speech recognizer. We divide the entire post-processing task into two steps: error detection and error correction. We consider the error detection step as a classification problem for which we apply the conditional random fields (CRFs) classifier. Furthermore, we apply transformation-based learning (TBL) to the error correction step. Our experimental results indicate that the proposed method corrects a speech recognizer's insertion, deletion, and substitution errors by 25.85%, 3.57%, and 7.42%, respectively.

• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.29-36
• /
• 2020

As the Ministry of Education adds an item to evaluate whether a university strictly manages class time compliance and student attendance, the number of cases in which universities use electronic attendance systems is increasing. If you use the electronic attendance system, you can manage attendance and record management in real time. In this paper, I would like to suggest a solution to the prevention of cheating, which is a problem with the existing electronic attendance system. In this paper, automatic attendance is possible by automatic or correction. If the electronic attendance is performed manually, the BLE beacon service of the professor's smartphone is activated, and then the student's electronic attendance application is automatically executed using the push message service. When the student clicks the attendance check button and the beacon is found, attendance is processed. In the case of automatic processing, the beacon is automatically searched and attendance is handled even if the student is not involved. The proposed system automatically handles attendance even when the student does not recognize it, and has the advantage of preventing illegal attendance because it can reconfirm attendance at unspecified intervals.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.667-675
• /
• 2011

In this paper, we propose an automatic image-to-image registration between high resolution multi-sensor images. To do this, TerraSAR-X image was shifted according to the initial translation differences of the x and y directions between images estimated using Mutual Information method. After that, the Canny edge operator was applied to both images to extract linear features. These features were used to design a cost function that finds matching points based on the similarities of their locations and gradient orientations. For extracting large number of evenly distributed matching points, only one point within each regular grid constructed throughout the image was extracted to the final matching point pair. The model, which combined the piecewise linear function with the global affine transformation, was applied to increase the accuracy of the geometric correction, and the proposed method showed RMSE lower than 5m in all study sites.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.3-7
• /
• 2014

Purpose SPECT/CT scan to be performed attenuation correction on the basis of CT induce an overestimation of the site due to the beam hardening artifact by metal cover and reduce the images quality. Therefore, this study using a phantom that has been inserted artificial hip joint investigated that effect on the SPECT/CT image causing by metal artifact for varying the parameters of the Attenuation Map. Materials and Methods Siemens Symbia T16 SPECT/CT equipment was used. Artificial hip joint was inserted to SPECT/PET phantom, 17 mm sphere of Bright Streak area in CT image was filled with Tc-99m so that the radiation activity was 8 times compared to background. And then Hot and Background was measured in varying Wide Beam Coefficient on Attenuation Map and RBR (Region to Background Ratio) of Metal and Non-Metal was calculated and analyzed depending on the presence or absence of the hip joint. Results It tended to hot count of Non-Metal and Metal to increase as the value of the manual mode is increased, hot count ratio with the group of both manual mode 0.5 and 0.4 is the best match. Also, in automatic mode, the ratio of RBRNon-Metal and RBRMetal was 1.135, statistically significant difference was not observed in the manual mode 0.5 and 0.4. Conclusion In the automatic mode of Wide Beam Coefficient in attenuation correction map, it was found that it is over-correction by 13.52%, it was possible to minimize the over-correction by the artifact in 0.5 and 0.4 of manual mode. Further studies should be performed in order to apply to a patient with the help of this and it is considered possible to reduce the over-correction by the metal artifact of an artificial hip joint for Hip-Resurfacing Arthroplasty patients, and to improve the diagnostic performance.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.1
• /
• pp.63-70
• /
• 2001

IDGPS(Inverted Differential Global Positioning System) is one of technique improving the accuracy of GPS positioning and is mostly used for tracking an automatic vehicle. In the IDGPS, the user send it’s GPS position and related satellite information to dispatcher, and the corrections are made at the dispatcher to get corrected user position. IDGPS suffered correction degradation as the baseline become large. This problem is resolved using NIDGPS(Network IDGPS). As the experimental results are demonstrated, the improvement of position accuracy using IDGPS and NIDGPS is verified.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.113-117
• /
• 2008

Wireless carrier sense multiple access (CSMA) systems are widely used but show extremely different transmission efficiency according to the operation environment. Simulation or prototype deployment is needed to see the transmission efficiency of a wireless CSMA system with the partial packet retransmission scheme. The lower bound for the transmission efficiency of such a system is found mathematically in this work. This shows how much the partial packet retransmission scheme improves the transmission efficiency quantitatively. It also shows that the maximum throughput is obtained at higher offered load compared to the conventional CSMA system without the partial packet transmission. The result of this work can be applied to IEEE 802.11 networks or wireless mesh networks.

• Journal of Navigation and Port Research
• /
• v.40 no.5
• /
• pp.265-270
• /
• 2016

Extreme tropospheric anomalies such as typhoons or regional torrential rain can degrade positioning accuracy of the GPS signal. It becomes one of the main error terms affecting high-precision positioning solutions in network RTK. This paper proposed a detection algorithm to be used during atmospheric anomalies in order to detect the tropospheric irregularities that can degrade the quality of correction data due to network errors caused by inhomogeneous atmospheric conditions between multi-reference stations. It uses an atmospheric grid that consists of four meteorological stations and estimates the troposphere zenith total delay difference at a low performance point in an atmospheric grid. AWS (automatic weather station) meteorological data can be applied to the proposed tropospheric anomaly detection algorithm when there are different atmospheric conditions between the stations. The concept of probability density distribution of the delta troposphere slant delay was proposed for the threshold determination.