• 한국의류산업학회지
• /
• 제21권5호
• /
• pp.627-639
• /
• 2019

This study analyzes differences between the results of 3D direct measurements and automated measurements for Korean elderly females according to age groups, side somatotype, and BMI groups. This study compares the measurement differences of the direct and the 3D automated measurements for women between the ages of 70 to 85, according to age group, BMI group, and side somatotype. A comparison of the results of the direct measurement and the 3D automated measurements for elderly women show that a meaningful discrepancy exists for 29 items out of 33 items. Furthermore, the results of comparing the average error tolerance recommended by ISO20685 shows that 30 items out of 33 items exceeded ISO recommendations. The results of the automated measurement program shows a higher degree of accuracy for straight postures; however, this unsuitable for postures of elderly women with a changed somatotype. The analysis results of the measurement difference indicate the suitability of the automatic measurement programs is found to be high for stood postures, while problems seem to exist on several items along with an automated program is not appropriately used due to posture and part of body changes for elderly women. Therefore, it is recommended to develop an algorithm, that reflects the body changes of elderly women first and then upgrade the automated program equipped with a measurement size method. It is hoped that the study results can be utilized as base data for improving the automated measurement program.

• 센서학회지
• /
• 제22권6호
• /
• pp.387-392
• /
• 2013

Camera rigs for shooting 3D video are classified as manual, motorized, or fully automatic. Even in an automatic camera rig, the process of Stereoscopic 3D (S3D) video capture is very complex and time-consuming. One of the key time-consuming operations is capturing the distance parameters, which are near distance, far distance, and convergence distance. Traditionally these distances are measured by tape measure or triangular indirect measurement methods. These two methods consume a long time for every scene in shot. In our study, a compact laser distance sensing system with long range distance sensitivity is developed. The system is small enough to be installed on top of a camera and the measuring accuracy is within 2% even at a range of 50 m. The shooting time of an automatic camera rig equipped with the laser distance sensing system can be reduced significantly to less than a minute.

• 한국안광학회지
• /
• 제20권4호
• /
• pp.455-462
• /
• 2015

목적: 친수성 콘택트렌즈 정점굴절력 측정 방식중 하나인 wet cell 측정법을 활용한 국산화 측정 홀더와 프로그램 개발에 관한 연구를 위해 현재 사용되어지고 있는 Poster wet cell 홀더와 함수율별 굴절력의 측정값을 비교 분석하였다. 방법: 안경원에서 사용 중인 기존 제품과 새롭게 개발된 국산제품에 식염수를 채워 넣고 소프트콘택트렌즈의 굴절력을 측정하였다. 실험에 사용한 친수성 콘택트렌즈는 안경원에서 많이 사용되고 있는 국내산 렌즈를 사용하였으며, 함수율별과, 구면굴절력별로 분류하여 각각 실험하였다. 결과: wet cell 방식으로 콘택트렌즈 굴절력 측정 시 새롭게 개발한 홀더의 경우 자동렌즈미터를 사용하여 굴절력을 측정한 결과 -3.00 D에서 함수율 38%는 -3.01 D, 함수율 45%는 -3.00 D, 함수율 58%는 -2.98 D로 측정되었으며, Poster wet cell 홀더를 사용하여 렌즈를 측정한 결과 -3.00 D에서 함수율 38%는 -3.60 D, 45%는 -3.06 D, 58%는 -2.46 D로 각각 측정되었다. 결론 : 고함수율에서 굴절력 측정값은 wet cell 방식의 두 홀더 모두 낮게 나타났으며, 새롭게 개발된 홀더와 프로그램을 통한 자동렌즈미터의 측정값이 기존의 Poster soft contact lens wet cell 측정방식에 비해 더 정확한 굴절력 측정 결과를 나타내었다.

• 사상체질의학회지
• /
• 제20권1호
• /
• pp.34-41
• /
• 2008

1. Objectives We had been developing a 3D Automatic Face Recognition Apparatus (3D-AFRA) in order to evaluate the external appearances with more objectivity. This apparatus provides a 3D image and numerical data on facial configuration, and this study aims to evaluate the accuracy of 3D-AFRA recognition. 2. Methods Each scanned pictures were pointed with the 3D Automatic Face Recognition Apparatus(3D-AFRA). And the results were compared with data pointed pictures with manual. And we analysed the difference between Automatic and manual by paired -test. 3. Results and conclusions In frontal face, the P-value was more than 0.05. In conclusion, We assessed that accuracy of recognition of 3D Automatic Face Recognition Apparatus(3D-AFRA) is considerably good. But we should develop methods of measurement for lateral face and indistinct points of frontal face.

• 패션비즈니스
• /
• 제16권1호
• /
• pp.150-159
• /
• 2012

This study intend to analyze differences between 3D body scanning sizes and direct measurement sizes of same subjects. The subjects of study are female students of university in China. 3D data analyze as a 3D Body Measurement Soft System. The conclusion found is as below: In case of circumferences, error between direct-measurement size and 3D body scanning size is from 4.9mm to 62.2mm. The neck circumference size of directmeasurement is bigger than 3D body scanning size. The height error range is from 0.6mm to 51mm. Height of underbust, waist and hip are that direct-measurement sizes are higher than 3D body scanning sizes. Gap of width is from 3.8mm to 21.9mm. The gap range is too narrow relatively to others. Only direct-measurement size of neck width is wider than 3D body scanning size. Error range of length is from 0.3mm to 41.8mm. 3D body scanning sizes of lateral neck to waistline, upperarm length, arm length, neck shoulder point to breast point, shoulder center point to breast point, lateral shoulder to breast point are longer than direct-measurement sizes. They have a negative margin of error. I intend to set up same measurement point between direct-measurement and 3D body scanning but they have some errors because direct-measurement point is applied by a person. 3D body scanning measurement point is settled by automatic system. A measurement point of direct-measurement and 3D body scanning isn't unite. So we need to make a standard of setting up measurement points.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.199-202
• /
• 2002

Moire topography method is a well-known non-contacting 3-D measurement method. Recently, the automatic 3-D measurement by moire topography has been required since the method was frequently applied to the engineering and medical fields. 3-D measurement using digital projection moire topography is very attractive because of its high measuring speed and high sensitivity. In this paper, using different N-bucket algorithm method of digital projection moire topography is tested to measuring object with the 2$\pi$-ambiguity problem. Experimental results prove that the proposed scheme is capable of finding measurement errors that decreased more by using the flour-three step algorithm method than the same step in the phase shifting of different pitchs.

• 한국의류학회지
• /
• 제24권6호
• /
• pp.895-906
• /
• 2000

The study planned to testify the accuracy of the 3D scanner through analyzing the human body measurement method and the evaluation of flare skirt with 3D scanner. The results obtained from this study were as follows; First, the results of measurement for the dress form and human body by 3D scanner were more accurate than one or two dimensional measurement method. Second, from the results of the scan for the flare skirts as worn the human body, we could obtain very accurate horizontal section map. Third, in the clothing ergonomics viewpoint, the accuracy of the 3D scanner was very excellent and its utility was higher than that of the moir photography method. Therefore, the 3D scanner is very useful for the human body measurement and the wearing evaluation. In a nutshell, this study illustrates that we have to develop a program of automatic human body measurement system which will enhance the application of the 3D scanner.

• Journal of Biosystems Engineering
• /
• 제13권3호
• /
• pp.52-58
• /
• 1988

This study was conducted to develop a grain moisture content measurement sensor for automatic control of rough rice drying by natural air. For the above objective, the electrod type sensor was designed and tested. The sensor was able to produce electrical resistance which changes with moisture content of grain. An A/D converter and a micro-computer wed for processing measurement data of sensor. The developed sensor satisfied most design requirements and the results of statistical analysis show that there it no difference between the measurement method of sensor developed and of the dry-oven. Using the developed sensor and measurement system, we are able to measure moisture content of rough rice automatically in drying by natural air.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.49-52
• /
• 2001

Moire topography method is a well-known non-contacting 3-D measurement method. Recently, the automatic 3-D measurement by moire topography has been required since the method was frequently applied to the engineering and medical fields. 3-D measurement using projection moire topogrphy is very attractive because of it s high measuring speed and high sensitivity. In this paper, using two-wavelength method of projection moire topography tested to measuring object with the $2\pi$-ambiguity problem. Experimental results prove that the proposed scheme is capable of finding absolute fringe orders, so that the $2\pi$-ambiguity problem can be effectively overcome so as to treat large step discontinuities in measured objects.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.229-230
• /
• 2022

According to the national building status, there are a total of 2.89 million buildings that are over 30 years old after completion, and the number is increasing by more than 70,000 to 80,000 buildings every year. As a result, the demand for demolition works is also increasing, and more than 3 to 4 collapse accidents occur steadily every year during demolition work. Major causes of accidents include non-compliance with plans, negligence of on-site supervisors, and failure to secure structural safety. Due to the strengthening of the Severe Disaster Punishment Act, there is growing interest in the demand for secure management of collapse detection during demolition works. Therefore, this study aims to investigate the applicability of real-time safety monitoring systems using a total station capable of 3D automatic displacement measurement in building demolition work for securing structural safety by the load changes during the demolition process.