• Journal of the Korean Institute of Navigation
• /
• v.20 no.2
• /
• pp.97-107
• /
• 1996

The method of Electromagnetic Wave Immunity Test is continuously endeavored by IEC and CISPR as international unification, but it has not been established yet. The main reason is why it is difficult to obtain the measurement method and normalization of threshold to find out the complicated parameters for Electromagnetic Wave immunity Test. So far, thus, the Electromagnetic Wave Immunity Test is carried out case by case as the electromagnetic environment, which is set up Electromagnetic Wave Immunity Test. This study has developed an algorithm and measurement software suitable for IEC1000-4 Regulations, where a ready-made Amplifier, and Signal Generator have been used and an interconnecting Interface Board has been constructed for connecting with the other apparatuses, i.e., RF Switch, Power Meter, Field Sensor, Pre-Amp., etc. Therefore, we have achieved the aim to develop an automated software using OOP method and the measurement system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1333-1346
• /
• 1996

As the automation system in manufacturing field works more efficientely, the automation scheme is applied to many areas. In order to reduce the entire manufacturing, cost the design process must be automated. However, design process is so complicated, it is very difficult to construct the design automation system. The axiomatic approach to design provides a general theoretical framework for all design fields, including mechanical design. The key concepts of axiomatic design are : the existence of domains, the characteristic vectors within the domains that can be decomposed into hierarchies through zigzagging between the domains, and the design axioms. Using this approach, the glass bulb design process was analyzed and the design automation software was developed. Through menu display, a user can select or furnish the design input and generate the drawing with ease.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.35
• /
• pp.1-8
• /
• 1995

Automatic inspection system software for display image characteristic of CRT is developed. There are two major contributions of this software development. One is that the data from measuring equipments which was usually collected manually is automatically collected through RS-232C port and is saved in computer, then, trend analysis graph and final reports are generated. The other is that evauation of characteristic of electron gun was automatically processed by CCD camera and image processing technique. The system is developed under MS-Windows environment utilizing Borland C++4.0 Compiler and DT 3852-8 image processor board. This system can save the time and man power to measure and to anayze the image characteristics relative to current method.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.2
• /
• pp.91-97
• /
• 2021

User interface for cancer classification system is a software application with clinician's friendly tools and functions to diagnose cancer from pathology images. Pathology evolved from manual diagnosis to computer-aided diagnosis with the help of Artificial Intelligence tools and algorithms. In this paper, we explained each block of the project life cycle for the implementation of automated breast cancer classification software using AI and machine learning algorithms to classify normal and invasive breast histology images. The system was designed to help the pathologists in an automatic and efficient diagnosis of breast cancer. To design the classification model, Hematoxylin and Eosin (H&E) stained breast histology images were obtained from the ICIAR Breast Cancer challenge. These images are stain normalized to minimize the error that can occur during model training due to pathological stains. The normalized dataset was fed into the ResNet-34 for the classification of normal and invasive breast cancer images. ResNet-34 gave 94% accuracy, 93% F Score, 95% of model Recall, and 91% precision.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.05a
• /
• pp.361-364
• /
• 2020

소셜 네트워크 서비스의 사용자가 늘어나면서, 소셜 네트워크 서비스상에서 발생하는 빅데이터를 활용한 서비스가 늘어나고 있다. 소셜 네트워크 서비스 데이터는 실시간으로 생성되며, 따라서 데이터 수집 시스템 역시 자동화하여 준 실시간으로 데이터를 수집할 필요가 있다. 본 논문에서는 대표적인 소셜 네트워크 서비스인 트위터의 데이터를 지속적으로 수집하기 위한 자동 수집 시스템을 제안한다. 수집 시스템은 Twitter API 를 활용하는 Python 라이브러리를 통해 내용 및 메타데이터를 수집하며, 수집된 데이터를 재 검증한 뒤 저장한다. 또한 구현된 시스템에 환경 데이터를 주제로 하는 쿼리를 입력하여 실제 트위터 데이터를 수집하며 구현된 시스템을 검증해보았다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.55-62
• /
• 2005

In this paper, a CAB/CAE integrated optimal design system is developed, in which design and analysis process is automated using CAD/CAE softwares, for a complicated model for which parametric modeling provided by CAD software is not possible. CAD modeling process is automated by using UG/OPEN API function and UG/Knowledge Fusion provided by Unigraphics. The generated model is transferred to the analysis code ANSYS in parasolid format. Visual DOC software is used for optimization. The system is developed for PLS(Plasma Lighting System), which is a next generation illumination system that is used to illuminate stadium or outdoor advertizing panel. The PLS system consists of more then 20 components, which requires a lot of human efforts in modeling and analysis. The analysis for PLS includes static load, wind load and impact load analysis. As a result of analysis, it is found that the most critical component is a tilt assembly, which links lower & upper body assembly. For more reliable analysis, experiment is conducted using MTS and compared with the Finite element analysis result. The objective in the optimization is to minimize the material volume under allowable stresses. The design variables are three parameters in the tilt assembly that are chosen to be the most sensitive in stress values of twelve parameters. Gradient based method and RSM(Response Surface Method) are used for the algorithm and the results are compared. As a result of optimization, the maximum stress is reduced by 57%.

• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.8-13
• /
• 2014

One of the main challenges of the automatic arc welding process which has been widely used in various constructions such as steel structures, bridges, autos, motorcycles, construction machinery, ships, offshore structures, pressure vessels, and pipelines is to create specific welding knowledge and techniques with high quality and productivity of the production-based industry. Commercially available automated arc welding systems use simple control techniques that focus on linear system models with a small subset of the larger set of welding parameters, thereby limiting the number of applications that can be automated. However, the correlations of welding parameters and bead geometry as welding quality have mostly been linked by a trial and error method to adjust the welding parameters. In addition, the systematic correlation between these parameters have not been identified yet. To solve such problems, a new or modified models to determine the welding parameters for tandem GMA (Gas Metal Arc) welding process is required. In this study, A new predictive model called STACO model, has been proposed. Based on the experimental results, STACO model was developed with the help of a standard statistical package program, MINITAB software and MATLAB software. Cross-comparative analysis has been applied to verify the reliability of the developed model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.31-39
• /
• 2016

Power system engineers use power systems solution programs such as PSS/E, DSATool, Power World simulators for power system analysis. In this reason, KEPCO has begun to develop independent power system program, KW-PSS(KEPCO World Power system Solution) since 2002 and KW-PSS ver2.0 development was completed in 2011. However, it did not have much better functions compared with other programs. Therefore, we focused on the development of the practical and specialized functions. Consequently, PAZ(Power system AnalyZer) ver3.0 has been developed and it realized a differentiation than previous version. In other words, previous version focused on the basic function of power system analysis, PAZ ver3.0 has implemented many automated functions for power system operators were driven maximize operational efficiency. The unique feature of the implementation is as follows : Automated check for exceeding the breaker capacity, Scheduled outage automation, Control-file wizard for various voltage stability analysis, Scenario-based multiple transient stability analysis and Auto calculation of transmission line impedance. As shown in these functions, Those functions provide to use power system analysis easily by automation and simplification for power system engineers. We will secure national expertise through PAZ ver3.0. In addition it will be able to gain competitive edge through the steady development in the world market.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.4
• /
• pp.336-342
• /
• 2016

H-CSR(Harmonized Common Structural Rules) integrating CSR-BC(Common Structural Rules for Bulk Carriers) and CSR-OT(Common Structural Rules for Double Hull Oil Tankers) came into effect in July of 2015, so that bulk carrier and double hull oil tanker should comply with this rules. So far, several studies for trend analysis of requirements of structure scantling based on H-CSR have been carried out briskly. However, those studies are rare to apply H-CSR in actual structural design of ships, especially bulk carriers. In this study, an automated system for compartment arrangement is used to search the design case that minimizes still water bending moment(S.W.B.M) in 38k bulk carrier designed by Far East Ship Design & Engineering Co. Ltd. Also, various structural design cases are considered by changing arrangement of structural members to reduce ship weight. The SeaTrust-Hullscan software developed by Korean Register is used to perform structural design of ships based on mother ship and proper design cases are selected by user. The DSA(Direct Strength Analysis) is performed to evaluate structural safety for the yielding and buckling analysis by using MSC Nastran software. The effect of weight reduction is verified by comparison of ship weight between mother ship and the selected design cases.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.746-754
• /
• 2016

This study aimed to investigate the status of ready-made suit and MTM (Made-to-measure) suit production with 10 men's suit brands turning over 200 billion won. Their target age group is late 30's to late 40's. Regarding production for the ready-made suit, eight out of 10 brands are using both KS and their own sizing. Classification of body shapes was done in 8 brands, mostly for upper body in simple ways (lean, normal, and obese). All brands are conducting fittings on only standard size. The number of sizes produced is varying depending on the brands; 9 to 17 for a jacket and 9 to 20 for a pair of pants. Regarding on the MTM production, four out of 10 brands have implemented MTM production. The rate of MTM production to their total production is about 15-20%. There were positive opinions on MTM production since it enables to reduce stocks through a small quantity of production for necessary sizes only. The reasons of orders of MTM production were answered as 'no size available', 'unique body shape', etc., and most orders were placed by consumers who are fat-bellied or have thick thighs. They have used MTM automated CAD software developed by Gerber Technology or Investronica. All the brands have utilized automated marker-making software and cutting facilities for MTM production.