• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.50-57
• /
• 2023

Autonomous driving technologies have been gradually improved for road traffic owing to the development of artificial intelligence. Since the truck platooning is beneficial in terms of the associated transporting expenses, the Connected-Automated Vehicle technology is rapidly evolving. The structural performance is, however, rarely investigated to capture the effect of truck platooning on civil infrastructures.In this study, the dynamic behavior of bridges under truck platooning was investigated, and the amplification factor of responses was estimated considering several parameters associated with the driving conditions. Artificial intelligence techniques were used to estimate the maximum response of the mid span of a bridge as the platooning vehicles passing, and the importance of the parameters was evaluated. The most suitable algorithm was selected by evaluating the consistency of the estimated displacement.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.146-154
• /
• 2019

Recently, a system has been developed and applied to establish and utilize HD maps through R&D. The biggest problem, however, is the lack of a proper HD map update system, which requires the development and adoption of such a system as soon as possible. In addition, in the case of updating HD maps for automated driving, integrity and accuracy of maps are required for safe driving, so an test of these technologies and data quality is required. In April 2018, the Ministry of Land, Infrastructure and Transport implemented a project to 'Develop Technology to Demonstrate and Share the Instant Road Change Detection and Update Technology for automated driving. This paper analyzed the technology for updating map based on the investigation and analysis of relevant technology trends for the development of integrated demonstration and sharing technology of road change rapid detection and updating map technology, and put forward the criteria for road change rapid detection, integrated quality verification of update technology. It is expected that the results of this study will contribute to quality assurance of HD maps that support safety driving for automated vehicles.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.84-95
• /
• 2018

A mathematical model of responsibility-sensitive safety (RSS) has been proposed as a way to determine whether an autonomous driving accident has occurred. Autonomous vehicles related industry and academia have shown great interest in this model. However, this mathematical model lacks a comprehensive review on whether the model can be used to clarify responsibilities of autonomous vehicles in the event of a traffic accident. In this study, we analyzed the issues that need to be solved in order to apply the RSS model. In conclusion, there is a limit in the equation and the social acceptability of the RSS model. To use the RSS model practically, it is necessary to define the response time of the autonomous vehicle and to measure and control the reaction time value according to the appropriate technology level for each autonomous vehicle.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.4
• /
• pp.28-46
• /
• 2021

85-90% of the causes of traffic accidents are human factors, and autonomous vehicles with little free running distance can be an alternative to prevent traffic accidents caused by human factors. However, securing safety of autonomous vehicles should be preceded in order to reduce traffic accident damage through the introduction of autonomous vehicles. Therefore, it is necessary to verify whether the vehicle can respond appropriately to changes in the road and traffic environment through repeated and reproduced test runs in an environment similar to the actual road. In this study, K-City's development strategies for upgrading, differentiating, and systematic development were established by comparing and analyzing the current status of domestic and foreign testbeds and business environment analysis. Furthermore, we derive challenge tasks to achieve each strategy.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 1996.11a
• /
• pp.199-204
• /
• 1996

It is discussed how to determine the home location of idle vehicles in an AGVS with a loop guide path in a way of maximizing the request-call response probabilities for all demand. Optimal home position is selected by solving the simultaneous equations easily. Static positioning strategy is analyzed in which a single home position is allocated to which every vehicle is routed whenever it becomes idle. The cases of unidirectional guidepath is considered only. We provide a numerical example to illustrate the search algorithm developed for the case and compare the searched optimal solutions with the others.

• Journal of the Korean Society of Safety
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2017

In industry AGV's(automated guided vehicles) that can detect and follow guidelines drawn on the factory floor using magnetic or optical sensors are widely used. However, such AGV's without preview capability cannot effectively avoid collision with obstacles that may occasionally pass through the guideline. Furthermore, without preview information, they consume much energy at the right angle corners as they have to make sudden directional change. Also, the risk of dropping payloads increases in such situations. In this study, infrared preview sensors were adopted to a mobile robot for detecting not only the current position but also the forward position of the guideline and the preview control technique was applied to optimally control the mobile robot's motion using the information from the infrared preview sensors. Then the effectiveness of this approach was investigated through a series of experiments. The experimental result shows that the proposed approach is effective for safety enhancement as well as for better efficiency.

• IE interfaces
• /
• v.15 no.3
• /
• pp.316-324
• /
• 2002

Automated Guided Vehicles are widely used as an essential material handling system for FMS to provide flexibility and efficiency. We suggest a new dispatching rule based on priority function which considers urgency and empty vehicle travel time under finite buffer capacity. We evaluate the performance of the proposed rule by comparing the performance of Shortest Travel Time/Distance(STT/D) rule in terms of machine utilization, throughput and WIP level using simulation. The simulation results show that the suggested dispatching rule is robust and provides better machine utilization, throughput with comparable WIP level compared to STT/D rule.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.5
• /
• pp.1-8
• /
• 1997

The purpose of this study is to suggest the methods to model driver input and evaluate the handling performances of a vehicle by dynamic simulation using ADAMS (Automated Dynamic Analysis of Mechanical Systems) software. The driver input was modeled using the PID controller to follow the desired velocities and paths. The gains of the controller were decided by the trial and error methods aided by Ziegler-Nichols rule. It was successful to apply the rule for the vehicle model to follow the desired values of steady state cornering and lane change maneuver. As the results, handling performances of baseline and two variegated vehicles were evaluated. The theoretical provement was performed to explain the differences.

• IE interfaces
• /
• v.17 no.spc
• /
• pp.131-140
• /
• 2004

The purpose of this paper is to develop and show the efficiency of the URL(Unload Request Logic) and LRL(Load Request Logic) of the dispatcher in the Fab(Fabrication) Manufacturing Execution System. These logics are the core procedures which control the material(wafer and glass substrate) flow efficiently in the semiconductor and LCD fab considering inter-bay as well as intra-bay material flow. We use the present and future status information of the system by look-ahead and the information about the future transportation schedule of Automated Guided Vehicles. The simulation results show that the URL and LRL presented in this paper reduce the average lead time, average and maximum WIP level, and the average available AGV waiting time.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.767-779
• /
• 2017

Automated mission planning for unmanned aerial vehicles (UAVs) is difficult because of the propagation of several sources of error into the solution, as for any large scale autonomous system. To ensure reliable system performance, we quantify all sources of error and their propagation through a mission planner for operation of UAVs in an obstacle rich environment we developed in prior work. In this sequel to that work, we show that the mission planner developed before can be made robust to errors arising from the mapping, sensing, actuation, and environmental disturbances through creating systematic buffers around obstacles using the calculations of uncertainty propagation. This robustness makes the mission planner truly autonomous and scalable to many UAVs without human intervention. We illustrate with simulation results for trajectory generation of multiple UAVs in a surveillance problem in an urban environment while optimizing for either maximal flight time or minimal fuel consumption. Our solution methods are suitable for any well-mapped region, and the final collision free paths are obtained through offline sub-optimal solution of an mTSP (multiple traveling salesman problem).