• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.3
• /
• pp.259-263
• /
• 2004

In the manufacture progress of LCD or semiconductor, there are used many kinds of gas like erosion gas, dilution gas, toxic gas as a progress which used these gas there are required high puritize to increase accumulation rate of semiconductor or LCD materials work progress of semiconductor or LCD it demand many things like the material which could minimize metallic dust that could be occured by reaction between gas and transfer pipe laying material, illumination of the surface, emition of the gas, metal liquation, welding etc also demand quality geting stricted. Material-Low-sulfur-contend (0.007-0010), vacuum-arc-remelt(VAR), seamless, high-purity tubing material is recommend for enhance welding lower surface defect density All wetted stainless steel surface must be 316LSS elecrto polishinged with ${\leq}0.254{\mu}m$($10.0{\mu}in$) Ra average surface finish, $Cr/Fe{\geq}1.1$ and $Cr_2O_3$ thickness ${\geq}25{\AA}$ From the AES analytical the oxide layer thickness (23.5~36 angstroms silicon dioxide equivalent) and chromum to iron ratios is similar to those generally found on electropolished stainless steel., molybdenum and silicon contaminants ; elements characteristic of stainless steel (iron, nickel and chromium); and oxygen were found on the surface Phosphorus and nitrogen are common contaminants from the electropolish and passivation steps.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.15-27
• /
• 2007

The Korean Auto industry has developed remarkably over the past 30 years. In 2005 alone, Korea produced 3.7 million vehicles, and the number of vehicles registered surpassed the 15 million marks. The rapid growth in registration, however, has given increasing problems to the traffic congestion and the environmental pollution. The system for handling of ELV in Korea is governed by the 'Motor management law'. The law places the responsibility for vehicle scrapping directly on the vehicle owners. The take-back rate of ELV reaches nearly 100% in Korea since 1987. To further entourage recycling, the government introduced the extended producer responsibility system(EPRS) starting January 1, 2003, which imposes waste recycling obligations on producers or importers. According to the system, producers must recycle home appliances and packaging materials. This system, however, did not involve the automobiles. In 2006, the automobiles recycling law is under preparing now by the government. This article is concerning current status for End-of-Life vehicle's recycling and the recycling system model for advanced ELV industries in Korea.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.3
• /
• pp.491-511
• /
• 2016

This paper attempts to understand the nature and dynamics of global value chains in the auto industry using the OECD TiVA 2015 edition on the bilateral foreign value added in exports over the period 1995-2011 and employing the techniques of social network analysis such as the computation of network measures and visualization of value added trade flows. It is shown that there has been a tendency towards increasing production fragmentation both within and across regions. The automotive value-added network is found to have small-world properties with a hierarchical, clustered and dense structure. The differences among the US, Germany and China as major suppliers of foreign value added in global automotive value chains are remarkably revealed. Although the fragmentation of production has been developed on a global scale, a dichotomous tension between center and periphery and domestic and foreign capital lies behind it.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.72-77
• /
• 2017

This paper focuses on the development of a supporting S/W tool for the automated design of an automotive press trim die. To define the die design process based on automation, we analyze the press die design process of the current industry and group repetitive works in the 3D modeling process. The proposed system consists of two modules, namely the template models of the trim steel parts and UI function for their auto-positioning. Four kinds of template models are developed to adapt to various situations and the rules of the interaction formula which are used for checking and correcting the directions of the datum point, datum curve, datum plane are implemented to eliminate errors. The system was developed using CATIA Knowledgeware, CAA(CATIA SDK) and Visual C++, in order for it to function as a plug-in module of CATIA V5, which is one of the major 3D CAD systems in the manufacturing industry. The developed system was tested by applying it to various panels of current automobiles and the results showed that it reduces the time-cost by 74% compared to the traditional method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.178-185
• /
• 2012

In Korea, researches on the exposure assessment of the hand-transmitted vibration started from the mid-90, however, they were performed in the limited industries such as auto-assembly plants and the evaluation of the vibration was mostly conducted by ISO 5349(1986). Therefore, it was necessary to assess hand-transmitted vibration levels of workplace such as ship building/repairing industry or mining industry where occupational injuries are largely occurred and to evaluate the vibration levels using revised ISO 5349(2001). The SVAN 949 Four Channels Sound & Vibration Analyser was used for the measurement. The workers using a chain saw were exposed to $1.7{\sim}2.8m/s^2$ of daily vibration level. Workers using a rock drill in a coal mining were exposed to the highest vibration acceleration among workers and the levels were $7.1{\sim}10.8m/s^2$. Vibration levels of grinders were different according to the types of grinders. The hand-transmitted vibration of 3 types of grinders were measured and the levels were $3.3{\sim}11.1m/s^2$. Workers using a impact wrench were exposed to $1.5{\sim}1.6m/s^2$ of vibration. Out of 20 kinds of machines, only 4 tools provided the information of vibration acceleration on the instructions. In addition, the current condition of workplaces to control vibration was not much different from the past because there are no vibration exposure limit.

• Industry Promotion Research
• /
• v.3 no.1
• /
• pp.33-42
• /
• 2018

This study examined the effect of behavior on leader' s impersonal behavior and organizational members 'semi - productive task and the moderating effect of organizational support perception. As a result of conducting a questionnaire survey on SMEs of auto parts industry in Chungnam, Sejong, and Daejeon, the non-personality behaviors of the top leaders had a significant effect on the non-personality behaviors of the middle leaders (p <.001, ${\beta}=.910$). The results of this study are as follows. First, the relationship between the leader and the supervisor was significantly influenced by the non-personality behaviors. In addition, higher leaders have a moderating effect on negative behaviors and semi-productive task behaviors toward the organization of members. The control effect of semi - productive task behavior was confirmed. The results of this study provide suggestions for reducing economic loss and social loss due to semi-productive task behavior of organizational members by revealing the phenomenon of non-personality behavior of middle leader to non-personality behavior of upper leader.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.10
• /
• pp.940-948
• /
• 2012

In Korea, researches on the exposure assessment of the hand-transmitted vibration started from the mid-90, however, they were performed in the limited industries such as auto-assembly plants and the evaluation of the vibration was mostly conducted by ISO 5349(1986). Therefore, it was necessary to assess hand-transmitted vibration levels of workplace such as ship building/repairing industry or mining industry where occupational injuries are largely occurred and to evaluate the vibration levels using revised ISO 5349(2001). The SVAN 948 Four Channels Sound & Vibration Analyser was used for the measurement. The workers using a chain saw were exposed to 1.7~2.8 $m/s^2$ of daily vibration level. Workers using a rock drill in a coal mining were exposed to the highest vibration acceleration among workers and the levels were 7.1~10.8 $m/s^2$. Vibration levels of grinders were different according to the types of grinders. The hand-transmitted vibration of 3 types of grinders were measured and the levels were 3.3~11.1 $m/s^2$. Workers using a impact wrench were exposed to 1.5~1.6 $m/s^2$ of vibration. Out of 20 kinds of machines, only 4 tools provided the information of vibration acceleration on the instructions. In addition, the current condition of workplace to control vibration was not much different from the past because there are no vibration exposure limit.

• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.146-155
• /
• 2022

The purpose of this study is to investigate the recyclability of Shenlong in China using SWOT. The main analysis results are as follows. First, provided that the company's current capacity utilization rate is seriously insufficient, reducing staff is one among the effective ways. Second, Shenlong should open a web store to cater to young people's online shopping behavior, and further expand the brand visibility using national mainstream media and online shopping platforms like Taobao and JingDong to market Dongfeng Peugeot and Dongfeng Citroen on the whole network. Third, under the premise of maintaining the present best-selling models, Shenlong should appropriately reduce the amount of models, adjust the assembly capacity ratio of every model and every displacement in real time per the newest market trends, increase the agility of auto companies' production, and timely meet the wants of domestic consumers. Fourth, dual-brand coordination and channel integration are very necessary, and also the profitability and profitability of dealers are going to be further improved, thereby increasing sales. Fifth, target building new energy leading products of Shenlong, strive to attain the forefront of the industry within the sales of recent energy vehicles within 5 years, and gradually expand new energy vehicle products from passenger vehicles to passenger vehicles and commercial vehicles. Finally, the marketing field of Shenlong Automobile should achieve "three major changes", that is, change from a goal-driven type to a demand-driven type, cancel the bundling of outlet invoicing goals and delivery incentive tiers; start from basic capabilities, and set pragmatic and challenging goals; focus Channels, to realize following the activation of outlets, and single store sales increase.

• Information Systems Review
• /
• v.19 no.1
• /
• pp.123-145
• /
• 2017

This study empirically examines the effects of regulation on online gaming. Going beyond ad hoc heuristic approaches on individual behavior, we investigate the effects of regulation on dynamic changes of games or service providers. In particular, we propose three theoretical perspectives: social influence to investigate the regulation effect, the role of prior experience to determine the difference in the regulation effect size through users' prior experience, and network externalities to discover the difference in the regulation effect size according to the number of users on an online gaming platform. We use the vector autoregression methodology to model patterns of the co-movement of online games and to forecast game usage. We find that online gamers are heterogeneous. Therefore, policy makers should make suitable regulations for each heterogeneous group to effectively avoid generating gaming addicts without interrupting the economic growth of the online gaming industry.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.1008-1016
• /
• 2014

This study aims to analyze the changes in the mechanical properties of woven fabrics(cotton, linen, wool, silk, and polyester) by bonding fusible interlinings with varying deniers(10D, 20D, and 30D) for a 3D virtual try-on system(one that a user to try garments through screens using Avatar) developed over the last decade. We experimented with four mechanical properties and thicknesses of twenty-three specimens of interlining bonded fabrics including face fabrics and interlinings by using the KES-FB-AUTO system. The results showed that the tensile property increased(LT and RT increased and WT decreased) as the denier of the interlining increased; however, the change was slight. In contrast, the bending and shear properties increased significantly as the denier of the interlining increased on both the warp and the weft. This showed evidence that the interlining gives the fabrics size stability. The compression property was slight changed as the tensile property varies depending on the fibers and the denier of interlining. As expected, the thickness increased by bonding the interlining as the denier of interlining increased. From these results, we conclude that 3D users need to reflect these changes of woven fabrics by bonding interlinings when they try screen fittings to accurately express the fabric reality of manufactured garment.