• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2145-2147
• /
• 1998

This paper presents a Class-D type switched mode audio power amplifier employing ZVT(Zero-Voltage-Transition) soft switching technique. In order to obtain a wide bandwidth and lower distortion for an audio amplifier a high switching frequency is essential. The ZVT switching scheme enables a high frequency switching without sacrificing the efficiency much as in a hard switching. A prototype amplifier is built to demonstrate the feasibility of this technique for the audio power amplifier.

• 전기의세계
• /
• 제29권12호
• /
• pp.798-803
• /
• 1980

A computer program for noise analysis of the audio circuit is developed. The application of the program to the equalizer, low frequency amplifier of radio circuit and cascaded amplifier show good results. The general noise analysis method for cascade operational amplifier is presented. The noise spectral power density is calculated for a resonator active filter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.605-607
• /
• 2004

A class D digital audio amplifier with small size, low cost, and high quality is positively necessary in the multimedia era made of home theater system and the digital audio broadcasting (DAB). It is impossible to analyze the stability of the digital audio amplifier, which is based on the PWM signal processing. To solve this problem, the digital audio amplifier is analyzed using variable structure control theory which is one of nonlinear system theories. Moreover, the magnitude and the frequency of ripple signal, which generated by hysteresis in the comparator, is obtained using describing function which is useful to represent the input-output relation of nonlinear system.

• 제어로봇시스템학회논문지
• /
• 제13권4호
• /
• pp.385-391
• /
• 2007

A class D digital audio amplifier with small size, low cost, and high quality is positively necessary in the multimedia era. Since the digital audio amplifier is based on the PWM signal processing, it is improper to analyze the principle of signal generation using linear system theories. In this paper, a class D digital audio amplifier based ADSM (Advanced Delta-Sigma Modulation) is considered. We first model the digital audio amplifier and then explain the operation principle using variable structure control algorithm. Moreover, the ripple signal generated by the hysteresis in the comparator has a significant effect on the system performance. Thus, we present a method to find the magnitude and the frequency of the ripple signal using describing function. Finally, simulations and experiments are provided to show the validity of the proposed methods.

• 한국멀티미디어학회논문지
• /
• 제20권9호
• /
• pp.1551-1558
• /
• 2017

Audio power amplifiers have been designed based on the premise that the impedance of loudspeakers is fixed at nominal 4 ohms or 8 ohms. However, it is known that the impedance varies with frequency and takes on the nominal value at some limited frequencies. The principle of the loudspeaker operation reveals that the sound pressure produced by the loudspeaker is proportional to the current flowing in the voice coil, not the voltage between the two terminals. We take the characteristics of the loudspeaker into account and compare the frequency responses of the loudspeaker in voltage-drive mode and current-drive mode via computer simulations, to conclude that the audio amplifier drive mode should be re-considered in an effort to improve the sound quality.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.109-116
• /
• 2014

This paper presents a high-efficiency digital class-D audio amplifier using a composite interpolation filter for portable audio devices. The proposed audio amplifier is composed of an interpolation filter, a delta-sigma modulator, and a class-D output stage. To reduce power consumption, the designed interpolation filter has an optimized composite structure that uses a direct-form symmetric and Lagrange FIR filters. Compared to the filters with homogeneous structures, the hardware cost and complexity are reduced by about half by the optimization. The coefficients of the digital delta-sigma modulator are also optimized for low power consumption. The class-D output stage has gate driver circuits to reduce shoot-through current. The implemented class-D audio amplifier exhibited a high efficiency of 87.8 % with an output power of 57 mW at a load impedance of $16{\Omega}$ and a power supply voltage of 1.8 V. An outstanding signal-to-noise ratio of 90 dB and a total harmonic distortion plus noise of 0.03 % are achieved for a single-tone input signal with a frequency of 1 kHz.

• 한국멀티미디어학회논문지
• /
• 제21권9호
• /
• pp.1068-1075
• /
• 2018

We propose a method for driving loudspeakers from class D audio power amplifiers in current mode, instead of in conventional voltage mode, which was impossible with the feedback circuitry. Unlike analog audio amplifiers, Class D audio power amplifiers have signal delay between the input and output signals, which makes it difficult to apply the feedback circuitry for current-mode driving. The idea of the pre-distortion scheme used for the compensation of the non-linearity of RF power amplifiers is adapted to remedy the impedance variation effect of the loudspeakers for current driving. The method uses the speaker model for the pre-distorter to compensate for the speaker impedance variation with frequency. The simulation and test results confirms the validity of the proposed method.

• 대한전자공학회논문지
• /
• 제10권2호
• /
• pp.23-35
• /
• 1973

ECAP을 사용하여 직류, 교류, 과도현상에 대한 회로해석을 논하였으며 2단 가청주파 증폭기의 저주파 및 고주파 영역에서의 주파수 특성을 ECAP방식을 사용하여 해석하였다. 또한 근사식과 실험을 통하여 전류, 전압의 이득을 구하여 콤퓨터에 의한 값과 비교하여 본 결과 잘 일치함을 보였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권2호
• /
• pp.58-63
• /
• 2017

The sound we hear is transmitted through the atmosphere. However, both the sound we want to hear and the surrounding sound are mixed, and noise is generated, and the sound is not clearly transmitted due to factors such as distance. In particular, in closed spaces like buildings, it is often difficult to hear sounds from outside because of the sound of reflection. People with hearing impairments, such as the elderly and the deaf, have a hard time hearing the sounds they want to hear. Thus, we are developing a hearing aid that can detect radio waves. To this end, we propose the development of a hearing aid that uses FM radio and Bluetooth. These devices are expected to be useful not only for the elderly and the deaf but also in situations where information is transmitted to a large number of people, such as students and tourists, in a large space. The main purpose of this device is to enable users to hear sound correctly without blind spots.

• 한국통신학회논문지
• /
• 제2권1호
• /
• pp.35-42
• /
• 1977

低周波增幅을 C級以上의 效率로 實現할 수 있는 스위칭 모우드 增幅器의 性能을 解析하였고 變調器로 使用하기 위한 回路構成과 얻어지는 特性改善에 關하여 考察하였다. 그 結果 變調度 97〔%〕까지의 直線性, 7,200〔Hz〕까지의 平坦한 周波數特性을 確認할 수 있었다.