• Nuclear Engineering and Technology
• /
• 제22권2호
• /
• pp.108-115
• /
• 1990

0.5~l.2-MeV 양성자빔에 대한 X-선 발생단면적의 측정을 Cu와 Au에 대해 수행하였다. 이 실험에서는 SNU 1.5-MV 탄뎀 반데그라프 가속기에서 얻은 양성자빔을 표적에 입사시켰다. 여기서 방출된 X-선과 후방산란된 양성자는 Si(Li) X-선 검출기와 SSB(Silicone Surface Barrier) 하전입자 검출기를 이용해 동시 측정하였다. 그리하여 측정된 X-선 발생단면적은 다른 실험치들 및 PWBA(Plane Wave Born Approximation)와 ECPSSR(Perturbed Stationary State corrected Energy loss, Coulomb deflection, Relativistic effects)인 이론치들과 비교하였다. 1.0-MeV근처의 양성자에너지에 대해 측정치는 PWBA 값보다는 ECPSSR(D.D. Cohen et al., 1985) 값에 더 잘 일치함을 보였다. 특히, Au의 측정치는 1.2-MeV 양성자빔에 대해 9.69$\pm$0.39 bams이었고, ECPSSR 이론치와는 5% 이내로 일치했으며, 0.5~l.2-MeV 양성자에 대한 실험치는 대부분의 다른 실험치들과 30% 이내로 일치했다.

• 폴리머
• /
• 제35권2호
• /
• pp.161-165
• /
• 2011

본 연구는 수계에서 오랜 시간 동안 안정한 생체적합 금 나노업자의 제조에 관한 것으로, 환원제와 안정제의 역할을 동시에 수행하는 폴리에틸렌이민을 이용해 응집성이 낮은 초미립 폴리에틸렌이민 금 나노입자를 상온의 수용액 상에서 합성하였다. 폴리에틸렌이민 금 나노입자의 평균 입자크기는 8~12 nm이었고, 수계의 나노콜로이드 %에서 50nm 내외의 클러스터를 형성하였으며, 매우 뛰어난 안정성을 보였다. 상대적으로 낮은 금속 전구체의 농도에서 나노입자를 제조하였을 때, 입자의 크기가 두드러지게 감소하는 경향을 나타내었다. 폴리에틸렌이민-금 나노입자의 X-선 회절분석 결과, 금에서 나타나는 전형적인 결정 피크가 발견되었다. 또한 세포배양실험 결과, 폴리에틸렌이민과는 달리 폴리에틸렌이민-금 나노입자는 98%의 세포 생존율을 보여 세포독성은 거의 없는 것으로 나타났다. 이상의 결과로부터 본 연구에서 합성된 폴리에틸렌이민-금 나노입자는 CT 조영제 등으로의 활용이 기대된다.

• Journal of Radiation Protection and Research
• /
• 제38권3호
• /
• pp.132-137
• /
• 2013

기존에 많이 사용된 반도체 검출기의 분해능은 통계학적 이론으로 그 분해능의 한계가 따른다. 이러한 이유로 최근에 반도체 검출기가 갖는 에너지 분해능의 한계를 뛰어넘는 저온 검출기를 이용하여 다양한 방사성 핵종 분석을 시도하고 있다. 본 논문에서는 $2{\times}2{\times}0.05mm^3$ 크기 금막 흡수체에 입사하는 에너지 때문에 흡수체의 온도가 상승하는 원리를 이용해 $^{241}Am$ 알파 선원의 에너지를 측정하였다. 흡수체의 온도 변화 측정에는 자기양자센서인 Au:Er를 이용하였으며 이는 순수한 Au에 핵스핀이 0 인 $^{168}Er$을 수백 ppm을 첨가하여 얻은 상자성 합금이다. 알파 입자 흡수에 의한 미세한 온도증가를 측정하기 위해서 희석식 냉동기보다 작동이 편리한 무냉매 자기냉동기를 이용해 mK 온도 영역의 저온환경을 구성하였다. $^{241}Am$ 선원 측정 결과 5.5 MeV에서 6.8 keV의 FWHM의 에너지 고 분해능을 얻었다.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.34-37
• /
• 2017

In recent emerging industry, Display field becomes bigger and bigger, and also semiconductor technology becomes high density integration. In Flat Panel Display, there is an issue that electrostatic phenomenon results in fine dust adsorption as electrostatic capacity increases due to bigger size. Destruction of high integrated circuit and pattern deterioration occur in semiconductor and this causes the problem of weakening of thermal resistance. In order to solve this sort of electrostatic failure in this process, Soft X-ray ionizer is mainly used. Soft X-ray Ionizer does not only generate electrical noise and minute particle but also is efficient to remove electrostatic as it has a wide range of ionization. X-ray Generating efficiency has an effect on soft X-ray Ionizer affects neutralizing performance. There exist variable factors such as type of anode, thickness, tube voltage etc., and it takes a lot of time and financial resource to find optimal performance by manufacturing with actual X-ray tube source. MCNPX (Monte Carlo N-Particle Extended) is used for simulation to solve this kind of problem, and optimum efficiency of X-ray generation is anticipated. In this study, X-ray generation efficiency was measured according to target material thickness using MCNPX under the conditions that tube voltage is 5 keV, 10 keV, 15 keV and the target Material is Tungsten(W), Gold(Au), Silver(Ag). At the result, Gold(Au) shows optimum efficiency. In Tube voltage 5 keV, optimal target thickness is $0.05{\mu}m$ and Largest energy of Light flux appears $2.22{\times}10^8$ x-ray flux. In Tube voltage 10 keV, optimal target Thickness is $0.18{\mu}m$ and Largest energy of Light flux appears $1.97{\times}10^9$ x-ray flux. In Tube voltage 15 keV, optimal target Thickness is $0.29{\mu}m$ and Largest energy of Light flux appears $4.59{\times}10^9$ x-ray flux.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.303-305
• /
• 2003

In this paper, we have been proposed a new method of multichannel biosensor using random fluidic self-assembly. A metal particle and an array was fabricated. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.175-177
• /
• 2006

Electrically Conductive Adhesives(ECAs) with solderable particles have been developed as an alternative to Pb-free solders. Our previous study proved that good wettability of solder particle is a prerequisite for the establishment of conduction paths. In this paper, two types of ECAs were formulated and the wetting characteristic low-melting-point Sn-In solder on Cu and Ni/Au pads was investigated. It was found that Sn-In solder in the developed resin material with reduction capability shows good wettability, especially on Cu pad.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2398-2400
• /
• 2005

In this paper, we have been described a new constructing method of multichannel biosensor using self-assembly by magnetic force interaction. A metal particle and an array was fabricated by photolithographic. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by magnetic force interaction and self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1317-1318
• /
• 2006

In this paper, we have been described a new constructing method of multichannel biosensor using self-assembly by magnetic force interaction. A metal particle and an array was fabricated by photolithographic. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by magnetic force interaction and self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1909-1911
• /
• 2003

This research describes a new constructing method of multifunctional biosensor using many kinds of biomaterials. A metal particle and an array was fabricated by photolithographic. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by magnetic force interaction and self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence and electrochemical methods.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.727-731
• /
• 2008

계면활성제(P123)를 주형물질로 사용하여 메조포러스 구조의 Pt-Au 합금박막을 전기화학적 증착법에 의해 ITO가 코팅된 유리 위에 합성하였다. 전해질은 각각 10 mM의 $H_2PtCl_6$와 $HAuCl_4$의 혼합용액에 일정량의 계면활성제를 첨가하여 사용하였다. TEM(Transmission Electron Microscopy) 분석을 통하여 기공구조를 확인하였고, SEM(Scanning Electron Microscopy) 분석을 통하여 합성된 박막의 표면입자의 형태를 확인하였다. 합성된 메조포러스 구조의 Pt-Au 합금박막의 입자 함량비는 EDS(Energy Dispersive X-ray Spectroscopy) 분석으로 조사하였다. 메탄올 산화에 대한 전기화학적 촉매활성과 박막의 안정성을 평가한 결과 메조포러스 구조일 때, 넓은 표면적으로 인해 산화전류밀도가 월등히 증가함을 알 수 있었으며, 순수한 Pt박막과 비교하였을 때 소량의 Au입자의 첨가로 촉매적 안정성이 향상됨을 확인하였다.