• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.147-154
• /
• 2001

Dynamic behavior of high speed train is very important because the high speed train should be safe and satisfied with the ride comfort. An eddy current brake system is mounted on trailer bogie and wheelset. The eddy current braking force longitudinally exerts on the articulated trailer bogie and the attraction force vertically exerts on the wheelset. Because a frame of eddy current brake system is flexible, these forces generate the vertical vibration at middle point of the frame. Also, the vibration change the vertical clearance between an electromagnet and top of rail which affect the magnitude of braking and attracting forces. Therefore, the dynamic behavior of the eddy current braking system must be predicted for design the dynamic characteristic of its mounting system when normally operate on rail which have irregularity. Vampire program is used for Prediction of the dynamic behavior of an eddy current braking system.

• 한국분무공학회지
• /
• 제5권3호
• /
• pp.45-54
• /
• 2000

A novel electrostatic splaying method for solidifying a galvanized coating layer was studied. Our experimental results and computer simulations showed that electric field could assist the fine droplets to attach on the steel surface and change the sprayed droplets trajectory especially in the space near the steel surface. It was necessary to apply the electric voltage higher than - 20 kV to obtain the enough electrostatic attraction force between droplets and the steel sheet.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1041-1046
• /
• 2004

A proportional pressure control valve has a nonmagnetic ring which is inserted in between a coil and plunger and it can get attraction force in proportion to input current by an influence of control cone. Therefore, a proportional pressure control valve is applied to a servo system as substitution of servo valve and an on-off solenoid valve widely because control of a high level is possible and pollution level is low. The purpose of this study is to develop domestic model of a proportional pressure control valve, and a test model was designed and manufactured through valve system analysis and finite element analysis. And comparison between results of theoretical analysis and static / dynamic characteristics test were carried out on a manufactured test model, and it was confirmed that it has excellent performance in comparison with other foreign products.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.190-195
• /
• 2004

An exhaust brake system is composed of a gate valve, a pneumatic cylinder and an on-off solenoid valve. An on-off solenoid valve which is a key component of the exhaust brake system ought to have characteristics such as high reliability and long life for reducing the foot brake and tires damage, and for driver's fatigue relief of middle/large size vehicles running a long distance. In this paper, an on-off solenoid valve which is used for vehicle brake system was studied. For the performance evaluation of the on-off solenoid, electromagnetic characteristics and dynamic characteristics are analyzed. On the basic study for the performance improvement of exhaust brake system, pneumatic circuit and pneumatic valve of on-off solenoid type were suggested and the performance of pneumatic valve through the test procedure was evaluated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.679-684
• /
• 2004

Numerical analysis of aerodynamic characteristics was differently performed according to the running situation of the Korean Tilting Train eXpress (TTX) that would be introduced for an improvement in efficiency of the used railroad track. Fluent6.0 was used for the analysis of Non-tilting case, Tilting case and Passing-by case with the model of TTX. As a result, the aerodynamic drag had little difference between Tilting and Non-tilting case. However, pressure contour under the train of Tilting case was not symmetry because the gap between a train and the ground was different at both sides. And this disparity of pressure worked on the side force. In Passing-by case attraction and counterattraction occurred alternately and affected to the opposite train. When two trains were side by side, the maximum attraction was generated especially. Through an analysis of pressure wave in tunnel a large variation of pressure was generated by the bluff nose of TTX. The results in this study would be good data for the aerodynamic characteristic on TTX and provide important information to judgment of running safety.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.71-82
• /
• 1999

비선형 동역학계의 불규칙한 운동은 그 계가 가지는 고유한 특성에 의해 생기는 현상으로써 때로는 예측할 수 없는 큰 운동이 발생한다. 해상 운행중인 선박의 경우 이러한 예측치 못한 큰 운동으로 인해 전복이 일어나기도 하므로, 비선형 선박 안전성 확보라는 관점에서 중요하게 다루어져야 한다. 본 연구에서는, 첫째로 임의의 구간 안에 있는 모든 초기 조건에 대해 선박 운동의 안정성을 파악하여 안정과 불안정으로 영역 구분을 시켜 주는 흡인 영역(basins of attraction)을 외력변화에 따라 그려 봄으로써 선박 운동에 대한 안정 영역의 정성적인 변화 과정을 파악하고자 하였다. 둘째로 전복이 일어나지 않는 안정 영역상을 초기 조건으로 한 선박 운동이 최종적으로 어떤 운동이 되는지 알아 보았다. 마지막으로 외력 변화에 따른 비선형 선박 운동 중 혼돈적 현상이 일어나는 운동에 대해서는 이를 상세히 분석하고자 과도상태가 지난 운동의 주기적 변화를 외력 변화에 따라 살펴보는 분기도(bifurcation diagram)를 이용하여 연구해 보았다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권11호
• /
• pp.611-616
• /
• 1999

The introduction of the eddy current braking(ECB) system in HSRT(high speed railway train) is known to be advantageous, in that the system is independent on wheel-rail adhesion coefficient which is greatly affected by weather condition. It also minimize the maintenance of the brake system and does not require any additional electric energy because it is powered form the regenerated power at the time of the braking. In this study, the braking and attraction forces of the ECB are simulated by 2-D FEM and are experimentally verified on a down-scaled prototype. A control algorithm of the ECB is proposed to generate constant braking torque using linear variation of the reference current according to speed. Experimental results shows that the constant torque is generated over all operating speed region by developed control algorithm.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5323-5329
• /
• 2013

스마트폰의 슬림화를 위한 방법으로 스마트폰의 두께 방향이 아닌 너비 방향으로 진동하는 수평 선형 진동 모터를 여러 회사에서 현재 개발 중이다. 진동 모터 개발과정 중 수학적 모델링을 이용한 방법은 진동을 예측하기 위한 효율적인 방법 중 하나이다. 하지만 실제 수평 선형 진동모터에서는 Lorentz Force에 의한 수평 힘과 진동자 내의 자석과 브라켓 사이에 작용하는 자력에 인한 인력과 진동자 중력에 의한 수직 힘이 발생하여 진동자는 수평 선형 운동이 아닌 비틀림 운동을 하게 된다. 즉, 진동자에 수평 힘만 고려되어져 이상적인 운동으로 가정하는 수학적 모델링은 해석 오차의 발생 원인 중 하나이다. 따라서, 본 논문은 상용 동역학 해석 프로그램인 "DAFUL"을 이용한 진동 모터의 동적해석을 제시한다. 이 해석 프로그램은 진동자에 작용하는 수평, 수직 힘을 모두 고려할 수 있어 실제 진동모터의 움직임에 가까운 운동을 구현하여 수학적 모델링이 가지는 한계를 극복할 수 있다. 또한 "DAFUL"을 이용하여 해석 결과를 검증하기 위해 실험을 행하였고, 각각의 데이터를 비교 및 분석하여 결과를 확인하였다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권6호
• /
• pp.173-183
• /
• 2020

The paper investigates the determinants of foreign direct investment (FDI) in Vietnam in 2000-2019 period. This study uses difference Generalized Methods of Moments (GMM) and Pooled Mean Group (PMG) to analyse panel data officially provided by General Statistical Office of Vietnam. The results show that market size impacts positively significant on FDI attraction: 1% -1.45% (PMG) and 1% -1.25% (GMM). Besides, some other factors have positive influences as labor force, macroeconomic policy, macroeconomic stability and skilled labor. Meantime, the trade openness negatively affects FDI inflows in the short-term, while not being statistically significant in the long-term. Moreover, economic shocks often have a negative impact on FDI inflows. The findings of this study lead to the following recommendations. First, authorities should pay special attention to encourage economic growth rate in Vietnam to expand market size because this is the first priority of foreign investors. Second, authorities need to continue increasing the rate of skilled labor, especially highly qualified management force, engineers and well-skilled workers. Third, the authorities should adjust trade openness to boost the role of its determinant in attracting FDI inflows. Fourth, macroeconomic stability needs to be governed by international standards in order to secure the belief of foreign investors in the long-term.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.345-350
• /
• 2001

Dynamic behavior of high speed train is very important because the high speed train should be safe and satisfied with the ride comfort. An eddy current brake system is mounted on trailer bogie and wheelset. The eddy current braking force longitudinally exerts on the articulated trailer bogie and the attraction force vertically exerts on the wheelset. Because a frame of eddy current brake system is flexible, these forces generate the vertical vibration at middle point of the frame. Also, the vibration change the vertical clearance between an electromagnet and top of rail which affect the magnitude of braking and attracting forces. Therefore, the dynamic behavior of the eddy current braking system must be predicted for design the dynamic characteristic of its mounting system when normally operate on rail which have irregularity. Vampire program is used for prediction of the dynamic behavior of an eddy current braking system. Five design variables and five performance index are considered for optimization through D-optimal experimental design in this paper. Also model center is used to search the optimal point for sum of performance index with variational matric method.